Manual Wire Stripping Machine Gauge Wire 0.06-1 inches,Scrapping Copper Wire Peeler Machine,Drill Powered Hand Crank Wire Stripper Tool for Scrap Copper Recycling

I bought a manual/drill driven wire stripper. I really love the ease and effortlessly way it strips wires. It is so much faster than stripping with a razor knife. Im a scrapper, and buying this machine has trippled the amount of money I get at the scrap yard. Paid for itself on the first trip to sell my copper. It is very well made, using quality materials. I would but it again for sure A+ 💕

Used this to strip a ton of wire. Worked flawlessly from the smallest to the largest wire. An absolute time saver for sure! I included a picture of all the empty wire casings.

This little wire stripper works really well and is of good quality

I have run hundreds of feet of all different kinds of wire through this stripper over the last few months and have found the strengths, weaknesses and some things I would change about the design. First, I bought this particular one over other cheaper, exact copies because this one showed it came with a spare blade. As it turns out, a spare blade is not included so right away I had a negative opinion of it and wished I had bought the cheapest one of this style but it has done the job so far on a single blade so the blade life is pretty good. I have stripped solid wire, stranded wire, aluminum wire, romex, automotive battery cable, multi-conductor wire and more styles. I have found some work better than others in this machine. Solid wire is the easiest to strip and stranded takes some dialing in of the cut depth and gets a bit messy but works good - wear gloves! Flat Romex can be stripped with this by using the largest hole to remove the outer cover then stepping down to the small holes for the individual wires inside. Wire with braided cloth-like jackets (old style wire) does not work as well and will clog up the wheels so the machine has to be constantly cleaned, I use a pick. A cordless drill makes stripping wire very easy, I never even installed the handle. I also keep a cable cutter nearby and a razor blade for any missed cuts or cuts that didn't go deep enough or just cutting off excess insulation already stripped off. A pick cleans out the drive wheels when they get clogged up (see photo of gunk on wheels). I do have problems every so often of the drive wheel slipping sideways on the shaft and have to put it back in place with a small prybar and re-tighten the set screw. Lastly, this machine should come with thumb screws instead of bolts to make changing the wire feed size plate a quicker operation as I find myself changing it fairly often. If you use the largest hole, the plate needs to be removed completely and flipped around. When my local scrap prices are about a $3 difference/lb for stripped vs unstripped wire, this machine is a no-brainer and is a money maker worth buying and saving time.

Easy to assemble, very well built and it works like a charm. I highly recommend this product, it made my life a lot easier!

It worked good with a drill strips all sorts of sized wires made me some money from cleaned wire. Took some time but is a good investment.

When I received the stripper I thought it looked well made. I mounted it on a scrap 2x4 I had laying around and tried it, it really did work smoothly. It was easy, fast, and efficient. One to two nights a week I would go out to shed and strip 3or 4 pieces of scrap copper wire, these were short thin pieces of wire. I literally stripped 12 thin short wires total. On the 13 wire it started to strip then suddenly the thing stopped , the handle continues to turn smoothly but the inner wheel stopped moving. When loosening the blade the wheel will begin to turn but not strip the wire. I’ve cleaned it, adjusted it, done everything I can think of and it still does not work. Too late to return it. Save your time and money and try a different brand or strip the old fashioned way. The short time it worked, yes it was a time saver, easy to use when it works, yes, the blade is sharpe, but in order for a tool to be efficient it should pay for itself and in this case it’s not worth the value of your money.

I love it

Very nice product

Not in use worst product & amazon return process very late worst exp this order

1mm and below 1mm wires not working

Not working west product