Pro Series 2.35" x 2.35" Power Cage Rack Attachments and Accessories

Ich war lange auf der Suche nach passenden Langhantel-Halterungen und bin hier fündig geworden, die Maße sind leider schwer zu finden, daher bin ich wirklich glücklich, dass auch die Qualität passt. Gerne wieder!

Very sturdy and good fit for rack. Much heavier and more precise design than other version of j-hook. Has lining on inside to reduce scratches on rack. It looks like there is a challenge on one screw for the resin pad riser. Screws are countersunk M4 and all have room to protrude thru the back side of the metal plate except for one. The bottom screw of the riser resin pad will rub against and scratch the rack if too long. This they have to be shorter than standard size. Picked these up from Amazon warehouse labeled as like new. Looks like previous customer tried to fix this issue with a different and shorter machine screw on the resin pad. They are not holding so the riser plate can shift side to side a little. I will work with customer support to figure this out.9/1) Update to original review. The typical starting length of M4 screw is 10mm. I was able to replace the two screws with M4x5mm. They work great.

I wanted to add a set of brackets to our power rack and these are much nicer than the unpadded ones that came with the cage originally. They have nice slick nylon pads mounted on them so the bar slides smoothly and can be adjusted without much effort. I've used hangers with soft rubber pads on them and much prefer these. Rubber tends to get eaten up by the knurling on the bar, but the nylon pads on these brackets don't seem to have that problem and still slide smoothly after months of use.

I needed to add a second set of brackets to my power cage in order to setup for squats. These were a great price and fit my needs perfectly. I also like the added felt pads on the inside to keep the paint from chipping off my frame.

Most of these j hooks have reviews about being droopy or the gap being too wide making the j hook loose so I was super concerned. These hooks are well priced and well made. They function like they should. Make sure to measure your rack to ensure the hook slides in perfectly. This set shows 2.3” gap on the brackets which work perfect since you figure that if your rack measures 2x2 then the hook has to be have an attachment bracket slightly bigger than 2” to wrap around the rack.