TP-LinkDeco BE65(3-pack) BE9300Mbps Tri-Band Whole Home Mesh WiFi 7 System, 2.5G Port, Speeds up to 9214 Mbps, AI-Driven WiFi Booster, Connect Over 200 Devices, Ideal for Gaming&4K, Easy Setup

Highly recommended and I very rarely write a review so I hope this is useful to all....Firstly the issue..... I had a BT router with 4 mesh discs that was providing 50-70mbs download and 25-35mbs upload - the house is big, it has very thick walls both internal and external - I have a lot of smart things connected - Sky Q with 3 mini boxes, 2 x hue controllers with over 90 lights/sensors/controllers attached (some inside some outside) - 6 smart TV's - a home Network Access System with 16TB RAID for backup plus the usual collection of phones, iPads and computers/laptops.The BT system worked sort of ..... the mesh system was ok but the blackspot still happened - devices did struggle to move from one place to another and the speeds were so slow - I took speed ratings in every room and the worst rooms were getting 2-3MB per second download and less than 1MB upload..... then there was the reliability of the system - when one mesh disc stopped working (the BT stuff is fairly cheap and cheerful but only cost £10 per disc) then it gradually took down the rest of the system - restarting the hub worked but boy oh boy did that take some time... and the hub was not really up to the job.What forced the change - installation into the village of fibre - by Quicklime and I signed up to 1000MBS upload and download so it was time to make the network work properly!The router they installed was ok - but I wanted a solution that would be good for the next 5 years or so.... I did my homework and ordered the the TP link Deco 65 triple pack - try band and wifi 7 - so hopefully enabling me to not worry about the network until 2030!I configured my Quickline ZYXEL router to have no wifi networks - one ethernet cable in and one out to the DECO (If i removed the ZYXEL then my internet provider Quicklime would not offer remote support).... I configured my DECO with the same wifi name and password as my old BT one and plugged in...... WOW - firstly all the wifi devices connected and worked (that were in range) without any new setup.... I then added the second and third DECO BE65 products... easy.... then I placed them in the house and again WOW!My speeds are incredibly - no black spots for wifi and such an easy process ..... so much so that I've already added an outdoor DECO X50 - it's not wifi 7 but it then allows the garden and patio to enjoy 100MBS connection.I cannot recommend this system and product enough - from unboxing to using took less than 30 minutes and then add another 15 mins per additional box.... I have been playing with the various settings and the network optimisation tool is great - if you change the positioning of any unit then run this and it will reconfigure for the best / optimum network.A fantastic product and well worth the money!

I have bought several wifi solutions over the years including previous TP link mesh networks. Whilst they have all worked "ok" this product absolutely smashes past anything before.Details:I had a TP Link M4 and M9 mesh with a Sky Fibre setup. My speeds were modest c 400Mbps at the modem with wifi at maybe 150Mbps. I upgraded Sky to the max option and that took me to 650 to 700Mbps at the modem, using the provided Sky router. However, I was still having some WiFi issues (TV's dropping off occasionally, poor signal in some rooms, devices not connecting to the 2.4GHz wifi, wifi speeds unstable and still at about 150Mbps etc), so I decided to upgrade the mesh and go for this productIt was expensive but absolutely, 100% worth it! No regrets whatsoeverI bought the pack of 3:- this replaces the Sky router and it connects directly to the fibre (no more Sky router)- the modem speed jumped from about 650 (Sky router) to 900Mbps even though the Sky package was the same- the wifi increased to 400 to 700 Mbps depending on where I was in the house- all rooms are covered with ease- some of the Alexa controlled lights that had never really worked suddenly connected and worked great! (This mesh has a dedicated IoT setting that beams at 2.4GHz only)- each router has 4 ports, so I had more than enough ports to connect the TV in using ethernetMy goodness... what a difference! Everything just works. I cannot praise it enough.One word of caution: When setting up the mesh for the first time, they do switch off and then on quite a bit during the setup. At first I thought there was a problem but it seems to be configuring itself. Be patient, it can take up to 10 minutes to find the other routers, navigate the switches and get itself sorted. But once it is running, it is amazing.Other points of note:- it has a dedicated IoT wifi for isolation (security) of all IoT devices. This wifi runs at 2.4GHz only, so it fixes a lot of the issues with IoT devices that don't like 5Ghz- improved security settings allowing for device isolation (even if the device is on your main network)- Guest wifi with limitations on duration of connection (even has a barcode that guests can scan to get immediate access without entering passwords)- It provides captive, which is cool albeit a bit gimicky for a home setup. But hey, why not.In summary: expensive but a resoundingly solid purchase. Go for it...