ERYONE Matte PLA Filament 1.75mm, 3D Printer PLA Matte Filament, +/-0.03mm, 1kg (2.2lbs)/Spool, Matte Multicoloured PLA, Matter Rainbow Watercolor

The media could not be loaded. Amazing filament with colour transitions. Very smooth giving an awesome finish to any print. Adhesion is great without any major tweaks. Perfect colour to any print that requires a rainbow finish like miniatures, keychains or ornaments. Extremely recommended!

I always use eryone filament as it prints perfect every time!No clogs, no stringing, no moisture!10/10 recommend!

Gorgeous filament to print with, and amazing design. Only problem is delivery time, almost a month per roll!

My primary 3D printer is the Eryone Thiniker S and has given me nothing but great prints (providing the settings are on point) so I have high expectation from their own brand of PLA. I received the matt PLA in denim blue within 24 hours of ordering from Amazon.The roll comes packed in the usual Amazon box with paper filler, the branded box is natural cardboard and very environmentally friendly, inside the roll of PLA is well packed and vacuumed with a sachet of silica crystals.. The finish is complete matt. The feel of the rolled PLA and finished prints is smooth to the touch.Regarding the tolerances, I found the filament was almost entirely 1.75mm and although stated there's a 0.2mm+/- tolerance, this could go down to 1.71mm. However in all my time 3D printing, an extra 10 microns is not going to cause you any issues. I didn't find many areas where it exceeded 1.75mm either. I've had much more expensive PLAs that although performed great, had greater dimensional variations than the Eryone.I decided to print a first layer and calicat as my test prints, these was printed at a 0.2mm layer height and 60mm/s. It's worth noting for anyone relatively new to 3D printing that I have been perfecting my Cura (slicer software) settings for a good while and even now I still fiddle with them. 99/100 print errors are because your settings are wrong rather than it being a problem with your filament (often just slow your print down to improve quality).Eryone recommend printing between 190-220c. I'm used to printing at 195-210c and decided to try 200c and found this was definitely the best temperature resulting in no warping or stringing. Both test prints came out great with no issues.I went on to print a stand and holder for my 5" display / Raspberry Pi / Octodash for my Eryone ER-20 and as you can see from the photos the colour and finish is really good, I like a good matt finish.Overall I am mega impressed! PLA prices are very volatile at the moment, this is not the cheapest and whilst definitely not the most expensive, it has the same quality and feel of the ultra-premium plastics.

Had high hopes for this filament, read the reviews and thought it would be okay , honestly the colour looks great but it just keeps blocking up my nozzle over and over and ruining the prints so in my opinion I will NEVER buy this again nor this brand as I've now had a terrible experience waste of money amf time!

It has great printing qualities, but that's not even the best thing about it - what makes it quite unique is that it can be sanded without any visual degradation! Sanded spots look just the same as the printed surfaces. As long as the layers are thick enough you can remove any imperfections, support marks etc with very little effort at that. It is also very easy to paint. It's not for everything, but if I had to choose a single filament only, it would well likely be this one.

It worked lovely on under an hour prints and got some great results with the duo colour but longer prints it breaks off and blocks the nozzle :(

Beautiful filament colours!Great adhesion ,prints lovely,great smooth matte finish, would recommend too everyone.

This specific colorway gradient is really hard to get your hands on for a reasonable price. Eryone seems to be the lowest price point out there, while also being the great quality that I've grown to expect from them. I am so happy to finally have this colorway at a more affordable price point. One of the best parts of this filament is the lack of stringing. I am usually someone that prints for function more than form, but I've been printing dragons for my Mom (and now my daughter) for a while and dragons in regular PLA and silk tend to have stringing problems when you get to the tops of some of the intricate details. I, therefore, end up spending a little while on clean up when a print is finished. I don't have that problem with this filament, they are nearly perfect as soon as they come off of the print bed...the first time ever for a matte filament as usually stringing I have experienced is worse with matte filaments. A couple of details to note that have changed from previous versions of the spool and packaging: this spool is still cardboard, but it is coated to work with AMS but this filament also came with a reusable plastic vacuum sealed back. I've had filament come with separate bags before, but this is one of very few filaments that I have purchased that came in a bag meant to be re-used. I will note that you should cut the bag open since the seal is not straight or flat due to the vacuum sealing and while you can absolutely tear it open as it is designed, you risk the plastic tearing unevenly, so I am glad I opted for scissors this time (ask me how I know).The only drawbacks that I have found is that there isn't much blue in the finished print and while I generally appreciate a quick color changing filament, because this one is only 3 colors, larger scale items tend to repeat colors more frequently than I'm used to. This isn't a drawback, but something to be aware of when you're deciding what kinds of things to print with a 3-color gradient as every type of gradient filament out there will have uses that it is best suited for.

Eryone Matte Gradient Maple Leaf PLA is packaged very well, sealed in a vacuum bag with a desiccant pack to prevent moisture. The spool winding is very neat and filament diameter is accurate and within tolerances. Eryone Filament has always been up there for me as a favorite and this matte gradient filament is no different. Adhesion is great as is the layer bonding and this filament prints very nicely. The beautiful transition from red to yellow is perfect for those flame style prints ore something with more fall colouring. The feel of the printed object with this matte filament has almost a chalky feel.Settings used for this testAnycubic Kobra 3ComboHotend 200Bed 65Speed 300mm/s

I recently tried out ERYONE Matte PLA Filament for my 3D printing projects, and I’m thoroughly impressed. Here’s a detailed review based on my experience:Matte Finish: The matte finish of this PLA filament is stunning. It adds a sophisticated, professional touch to prints, reducing glare and giving a unique, high-quality look. It’s perfect for prints where a glossy finish isn’t desired.Smooth Printing Experience: This filament is a joy to work with. It flows smoothly through the extruder with minimal clogging or tangling issues. The consistent diameter ensures even extrusion and reduces the risk of printing problems.Excellent Layer Adhesion: The adhesion between layers is impressive, resulting in strong, durable prints. This is particularly useful for functional parts that need to withstand stress and wear.Low Odor: During printing, the filament produces very little odor, which makes it more comfortable to use in indoor settings without requiring additional ventilation.Versatile: It’s compatible with a wide range of 3D printers and performs well at standard PLA printing temperatures. It’s also forgiving of slight variations in temperature settings, which makes it user-friendly for both beginners and experienced users.

spool was wound cleanly, prints very easily and the matte finish makes layer lines nearly invisible.definitely going to be buying this one agian.

Great prints, used it on bambulab P1S with AMS, works well in AMS in its original cardboard spool, no clogging