O11D EVO RGB E-ATX Gaming Dual Chamber case - ARGB Lighting Strips - Up to 420mm Radiator - Cable Management - Front and Side Tempered Glass Panels - Reversible Chassis (O11DERGBX.US)

This case made building my PC honestly enjoyable. Ease of installation is top-tier; plenty of room to work with, even for a large E-ATX board. Cable management channels and tie points are super well thought out, so everything stays clean. It supports a ton of fans — I’m running 9 total (Fan capacity is excellent) and still have space for a thick radiator. With all that airflow, cooling has been outstanding. My temps dropped compared to my last case even under full load. The tempered glass panels make the setup look gorgeous, and despite my doubts, they’re surprisingly scratch-resistant. I’ve moved it around a couple times already and no marks so far. Ease of cleaning is also a win. The dust filters come off easily and the internal layout doesn’t trap debris in weird corners. For power supply, there’s lots of space in the bottom chamber and even with a large 850W PSU, everything fits without stress. Highly recommend this if you're into clean builds and airflow-focused setups; it’s just a really well-engineered case all around.

I recently purchased the Lian Li O11D EVO RGB (ASIN B0CRKVN35N), and overall, it’s an impressive case with a lot to offer — spacious, clean, well-designed, and excellent for airflow. However, there is one major fitment issue that buyers should know about, especially if you plan on installing a 2.5″ SSD behind the motherboard tray. The Good Let’s start with the positives, because there are many. The space inside the case is outstanding. The dual-chamber layout gives you plenty of room to work comfortably, mount radiators, and route cables without feeling cramped. I installed a large GPU and a 360 mm AIO with zero problems, and there’s still room for future upgrades. Cable management is one of the strongest aspects of this case. Lian Li clearly put a lot of thought into the backside compartment. There are channels, Velcro straps, tie-down points, and wide routing gaps that make it extremely easy to build cleanly. Even with a fully modular PSU and multiple accessories, I ended up with a surprisingly tidy backside. Airflow, as expected from the O11 line, is excellent. With support for large radiators and plenty of fan mounting locations, I had no trouble achieving a cool and quiet setup. The tempered-glass front and side panels look premium without suffocating airflow, thanks to the well-designed ventilation paths. Everything about the design feels modern and intentional. The Issue: Back Panel Does Not Sit Right With SSD Installed Now for the problem — and unfortunately, it’s a pretty frustrating one. When mounting a 2.5″ SSD behind the motherboard tray, the case includes rubber stoppers that must be attached directly to the SSD using screws. These stoppers are meant to act as cushions so the back panel can rest against them without stressing the drive. However, once these rubber stoppers are installed, the back panel’s top nubs — the latch points that are supposed to hook into the frame — cannot fully engage. The SSD plus the rubber stoppers push the panel outward just enough that the top corners refuse to seat properly. You can press the panel in, but the nubs won’t catch, leaving the panel slightly proud and preventing it from locking flush like it should. This isn’t a minor cosmetic issue — if the panel can’t latch, it can’t fully secure. I spent a good amount of time repositioning cables and rechecking the SSD mounting, but the clearance issue seems unavoidable. Without the SSD, the panel fits perfectly. With the SSD and rubber stoppers installed (as designed), it simply doesn’t. Final Thoughts This is an amazing case overall: fantastic space, great airflow, premium materials, and some of the best cable management you’ll find at this price point. But the back panel does not sit right when the SSD is installed with the screw-mounted rubber stoppers, and the top panel nubs cannot latch into the frame, which is disappointing for an otherwise premium chassis.

I recently upgraded to the Lian Li O11D EVO RGB in white, and it’s been an absolute dream to build in and live with. 💡 Aesthetics & Build Quality The EVO’s sleek tempered glass front and side panels—complete with addressable RGB lighting—make it look phenomenal, especially when paired with daisy-chained RGB fans. It really lets your components shine without feeling overdone. 🔧 Build Flexibility & Features This case is incredibly modular. I used the reconfigurable bracket system to build dual workstations in one case (gaming + home office), and it was a snap. The included 90-degree GPU riser, vertical PSU mount, and removable SSD trays make layout options endless. Cable routing is clean and effortless; even in E-ATX mode, it looks neat on day one. 🔥 Cooling & Airflow Between the front-facing mesh, top and bottom ventilation, and room for up to 10 fans or multiple rads, airflow is outstanding. I’ve been running a 360 mm top and 360 mm side radiator setup with zero thermal issues—even with a high-core-count CPU and overclocked GPU. 🔇 Noise The included fan controller helps keep everything running quietly, and the solid build minimizes vibration. I’m getting optimal airflow and great noise control simultaneously. 👎 Minor Quibbles • It’s on the larger side—make sure you have the desk space for it. • Pricier than some mid-towers, but absolutely worth it if you value build quality and expandability. ⸻ Final Verdict: The Lian Li O11D EVO RGB E‑ATX is a top-tier, future-proof case that delivers gorgeous looks, extreme flexibility, excellent cooling, and solid value for premium builders. If you want a case that performs beautifully while looking like a showpiece, this one’s a winner.

This case is, by far, one of the best cases I've ever had the pleasure of building a system with. Its dual chamber design makes an easy job of cable management and creating a supremely clean build. It has ample airflow options, ample mounting options for virtually everything and it is STUNNING to see in person filled with RGB fans and gizmos! One thing that surprised me is the fan noise. It's basically silent. Just to test, I set every fan and the pump to 100% and it's... silent. It does a great job at silencing the fans. I currently have all 120mm fans, but I will be swapping out the bottom intake fans to the 140mm size at some point for the additional airflow they can provide at slower RPMs, but even if you use all 120mm fans like I did, you just won't hear them. The built-in RGB light strips on the top and bottom of the O11D-Evo look exceptional if you're going for that Flashy, Ritzy build, too! My only question is... Why couldn't we have had this case 25 years ago? THIS is the future of PC cases. Whether you're someone that wants to build a clean, modern, blacked out look with no lights or you're someone that wants all the flash you can possibly cram into a PC case... This is what you're looking for. Do be aware, however, that there are *ZERO* external bays. You won't be putting an internal CD/DVD/Blu-Ray drive or anything else that requires an external 3.5" or 5.25" bay. This case just doesn't have it... But let's all be honest here, who uses those these days? I've been building PCs since the late 1980's and in the past 10 years, I haven't had the need of an external drive bay for ANYTHING. Get this case. Or ANY of the Lian Li O11 cases. You won't be dissatisfied. You will, however, be absolutely amazed by the time you build your system! The options for mounting fans and radiators for water cooling is ample and the wide open view of your internals, especially loaded with RGB "things" is just jaw dropping! These are beautiful cases and an absolute JOY to build with!

Everyone knows it's a good case. Actually, most people know this as one of the best cases available especially for the price range. I can confirm this is an impressive case and would only suggest a few improvements or things to be aware of before buying. The mesh system in the panels will hinder airflow a significant amount. You will need high static pressure fans for the metal mesh areas, such as the side and top. I currently have thermalright argb infinity mirror fans installed and the airflow of the fans themselves is great, but the metal mesh greatly reduces the airflow. Get high static pressure fans. Some Pros: Extreme amounts of configurations. Beautiful argb light strips unique to this model. Comes with awesome accessories case for screws and such, can store all your pc screws, rubber mounts, etc neatly. Comes with graphics card sag support, unfortunately my card is too short for it, sigh. Some Cons: Metal mesh highly reduces airflow, high static pressure fans required for those areas or just deal with it like I did because I want the fans I have and that's that. Cable management is ok, though is reduced because of the side fan intakes. Doesn't come with any fans, which isn't a big deal as people obviously like buying different fans, though it will make the case eventually cost upwards of $250 and a lot higher depending. Summary: I recommend this case. Actually, I give this case an extremely high recommendation. I've never paid so much for a case and I have 0 regrets, kthx. Because of this case, I now have rgb vomit everywhere and it looks pretty cool, I wasn't even planning on so much rgb vomit, but here we are.

I picked this case out for my cousin because I thought he would like the aesthetic of the glass with the stripes of LEDs on the outside. Well. As long as you pay attention to the orientation of the fan mounting trays when you take them out, this case makes everything easy. There is far more than enough room for cable management in the back, and it comes with several velcro cable ties already installed. You get TONS of space inside for giant tower coolers and long GPUs. No extremely tight spots to run the CPU power connector, which has been an issue in MANY cases. And the PSU hidden in the back? Genius. That leaves space for three 120mm fans to blow directly into the GPU. And yes, you can pack TEN fans into this thing. I am extremely jealous of the airflow, and I bought a case for airflow... Just note that the case comes with zero fans. Unfortunately, I did not check until we were assembling. Heh. All the main panels you have to remove are attached with pegs. There are no screws to remove the side or rear panel. The top comes off with two non-captive thumb screws. The fan trays come out to make everything way easier with one non-captive screw. I didn't do anything with hard drives, but I imagine those are similar. But the best feature of this case is the front panel connector. IT IS A SINGLE PLUG. I didn't have to connect a separate two pin connector for the power LED, storage activity LED, power button, and reset button like every other case. It is one connector. I have been asking for this for years. Everyone I told was very excited about it (but not as much as I was because I am slightly insane). It's the best case I have worked with so far, hands down. Stupid easy to work with and utterly beautiful.

This is a great case. It feels sturdy and refined. It’s massive and offers a lot of space for large graphics cards or extra storage. The LEDs look amazing. The case feels ergonomic, enabling future part changes and great options for cable management. The one downside is that its size and weight may limit its usage on smaller desks. Because it is so bulky, it may be cumbersome to move frequently, like if you are in a dorm.

One of the best Computer Cases i have ever bought. Completely modular you can move the glass display to the other side of the case if you want it to sit on the left hand side of your desk. Removable Motherboard tray. Glass panels are easy to remove giving you access to your coponants with ease. I also love the doul chamber for the front and behind the motherboard. Cable Management is a dream giving you ample space to rout everything. The only one thing i wish on this case was more hard drive mounts. The LED's that go around the top and bottom of the case are great they are not to bright that they are blarring or distacting. They give you the option to turn them off also. Does not come with fans but LIANLI LED fans are the best with their stack connect making them a clean install and you can program them all together with the LIANLI Fan control app. If your looking for a awesome well desighned case look no further.

Müthiş bir ürün. Full lianli kasa yaptım keyifle kullanıyorum.

excelente calidad de materiales, clasico de la marca

جميل جدا

Great looking case. Love the removable support to open up the view. Switched from the older pc011d to this. Has more room and the multiple configurations are amazing. One of my favorite cases I’ve built in yet.

Perfect size for all 9 fans plus liquid cooler! Great case especially if you go with RBG components, definitely recommend!