6 Pack - Multiple Size Combination，2 Inch Hitch Receiver Silencer Pad . - Compatible with Most 2 Inch Trailer Hitch Receiver

Glad this came in the various sizes. Was able to get a perfect fit. Sturdy and durable. Works great.

They work well, and they are easy to install, and use. The widths provided are very good, but I found they don't fit exact (Which would be a trick). Another width to replace one of the thick ones, just might make this perfect. Every hitch manufacturer makes their arms a little different, which is accounted for by the dual sizes provided, but either makes it too hard to install the pin, or is too loose to make it anti rattle.

Works good still a little noisy. But better.

Great spacers because of the two sizes (most come only with the larger) so it works regardless on which extension hole we use on the hitch.

Updated: First vehicle I tried this on it didn’t fit well and did nothing for the rattle. I ended up getting a u-bolt anti rattle bracket which fixed the rattle. Second vehicle had a shallower receiver so the u-bolt bracket was difficult to position and might slip during travel. I used these spacer on the hitch before/after the u-bolt and they worked great as a spacer. They don’t squish/compress much, but just enough that they didn’t get in the way from tightening down the anti-rattle bolts/bracket from another company. Initial review: I was hopeful that this product would work. But it doesn’t do anything to help. I can still cause our hitch to rattle with the weight of my foot pressing back and forth. Maybe if your issue is your hitch is sliding in and out of the receiver tube and clanging against the pin these might help by limiting its travel. But the hitch pin should keep that to a minimum. In our case the receiver tube isn’t a snug fit so our rattle is from left/right/up/down wiggling. Our weight distribution hitch also doesn’t have a flat end to press firmly on the wedges - it’s a small angled lip, also limiting the effectiveness. Although there were two sizes (whole and half thick) in the pack, we needed closer to 1-1/3 wedges since 1 1/2 doesn’t compress. If this product had a small lip which went into the receiver tube it might have worked, but as is, it’s simply a waste for our our purpose.