Black Rubber Weather Stripping Door Seal Strip, D Shape Door Weather Seal Strip, Self-Adhesive Soundproofing Frame Insulation Tape for Doors Frame/Window Seal,Blocks Cold Drafts Noise

I was able to seal up my main entries with this stuff, and it sealed it up TIGHT! No more draft! It arrived in a simple bag, rolled up. It has a backing you peel off to expose the sticky part, and it’s a 3M style adhesive, which in my experience is about top of the line in adhesive. You get a good length of it in a roll. Easily enough to do two doors, with a bit left over. It’s black, like most weather stripping. I pit it up months ago, but waited to review until I was sure it was t going to fall off or anything. It’s held up perfectly. I even had to double it up at the top part of one door, and it still worked. If you have a draft, this will stop the air from leaking in/out, saving you money! So in a way it kinda pays for itself. The price is good considering how much you get, and the quality of the product. Just remember that YOU HAVE TO THOROUGHLY WIPE THE AREA WITH ISOPROPYL ALCOHOL before you apply this, or any adhesive tapes. That’s why most people fail. If you don’t do that, I don’t care what you use, it will not properly adhere to the surface. Follow that rule, and your projects will be a success. I hope my review helps.

Clean the area with isopropyl alcohol. Wear the gloves that come with the product. Open the chemical soaked packet with the cloth inside, then wipe the area. Do not get any of the chemical on your skin or eyes, as it mentions that it can be toxic. Wait 5 minutes, then place the rubber door seal strip. I used some scissors to cut them to appropriate sizes. I noticed that when I followed the instructions correctly that the adhesive on the rubber seal was pretty strong. I tried closing/opening the door after placing each rubber seal to test if the door would close completely. After placing the 3rd rubber seal, I noticed that the door wouldn't close anymore. So I could only apply one on the side and one at the top of the frame. There's still a small gap. I'll need a different, smaller seal to cover that part. After installation: it makes a peeling noise when opening the door as it forms a tight seal with the rubber. It does dampen noise, and completely blocks air flow where applied. If the rubber was softer, or not as thick, maybe I could've applied the 3rd rubber seal. But, it's durable at least.

Product was as described, tactile retention is marginal

The weather stripping was just the right width and the adhesive is great. No more issues. Product came quickly and on time.

This product worked ok, but it took a double layer in some spots...it's not nearly as wide as it looks in the picture. The adhesive was just ok, but I guess the cold door did not help the adhesion.

It is very easy to work with, but the only thing is that it is not as wide as it looks in the picture. Besides that it is very good product 👍

Works well at blocking the flow of air coming through the seam of the door. Easy to peel and stick on. Only issue is that some spots may make it difficult to close the door so test the place before removing the paper off of the adhesive. Also you will need to clean the area really well before applying it because any dust or debris will prevent it from sticking. The hold is about a 5/10. Super easy to remove .

Easy to apply but not sticky enough. I doubt if it will hold up to daily wear and tear. It seems to be cutting the draft for now.

Muito bom! Melhor do que todas as outras que tentei usar aqui.

C’est pas comme dans la publicité vidéo

Cumple con el objetivo y es fácil se colocar

Good product

Cumple muy bien la función de sellado ,solo considere que es muy angosto su tamaño .