DELEIKA 2017 Maserati LOGO Car door LED logo projector Light ghost shadow light For Quattroporte Ghibli GranTurismo GranCabrio Levante (Quattroporte, LOGO:1)

First of all, this part seems better quality than the OEM.I read the reviews on this which included installation pointers and thought I was well prepared for installation. I wasn't.Step 1: With a small regular screwdriver, pry the old lens out. Be prepared, I broke the retaining bracket off both lenses.Step 2: Use an awl or something pointed to depress the connector retainer and pull the connectors gently apart.Step 3: Push the male ends of the whip that comes with the light into the cars connector. This is actually the hard part. See the picture. Slide the rubber insulation up to cover the leads.Step 4: Insert the other end of the connector into the light.Step 5: Check the orientation of the logo and install by sliding the wire side in first, gently pushing toward the wired side, push the other side up.

2014 Maserati Ghibli S Q4: Wished it would have come with directions as it is not direct plug and play but came with an adapter harness, however, once my old eyes figured out which way to slide the bare ends of the adapter harness (there are 2 independent leads) into the car door harness plug (very tiny & hard to see) it was a no-brainer and a very easy install. They look brilliant! Tip: look at the male ends inside the fixture you remove from the door to see how the new wiring harness plugs orientation should be when inserting into the door wiring harness plug and it becomes a very easy, 2 minute install. Also, make sure to slide the supplied sleeves over each lead to protect from shorting as they are very close together.

These are one of the "coolest" easy upgrades you can do your car. It's a wonder why it's not a standard yet, given the free advertising. My 2015 Genesis G80 has been doing this since day 1. Anyhow, I clearly loved the effect and went for it. Installation was simple despite the lack of instructions. You simply use a flat head screwdriver to remove your existing one, disconnect it, and then link the two wires and reinstall and you're good to go. One thing to keep in mind this is a 2 pack, so if you want to cover all 4-doors you'll need to purchase 2x of these.

Received 2 lights today and installed them in the front doors of my 2018 Ghibli. The DELEIKA light fixtures are sligthly larger than the OEM fixtures that you remove. At first seem like they will not fit but they do pop into place if you push them in firmly. The new lights are not “plug in” ready, i.e., they do not plug in directly to the plug connection of the OEM light you take out, but came with wire taps that plug into the wire harness of the old lights and then into the new light. Pretty easy and took no more than 5 minutes for both lights. Picture attached. They are very bright and pretty cool. I cannot talk about how long they last but given they are LED’s I’d expect long life

I purchase these for my Maserati Granturismo sport because they were advertised as plug-and-play no wiring required. That was not the case I had to get them expertly installed which cost around $60 bring the total cost over a hundred. other brands are easily plug & go.. do-it-yourself. And they didn't fit snugly into my vehicle like advertised. the installer had to make adjustments for them to fit

I found this item very easy to install however a few tips that I will put it out there prior to anyone for going this easy modification.1) for best results purchase $5 splunger tool set. I have enclosed the image of the tool, the reason why I recommend this is because it makes prying the factory light out a lot easier without damaging the surrounding cutout.2) when removing the factory light use a small flat-head screwdriver like the one in the image to press down on the tlclip and release from the housing. Please note the the white portion of the outlet may be warm to touch it might be worth using lightweight pair of gloves.3) when connecting the red and black wires with the clip facing towards you the red will go on top and the black on the bottom. Make sure that you push the leads all the way in and you'll see the light illuminate.4) now before the modification back into the slot if you want it to be forward facing you must move the wire to the left and have it loop back around the opposite direction of the part that originally came out.I made the mistake of inserting them the same way that they came out and I will say removal of the modification was extremely difficult however I was able to successfully remove and reinstall with the wire tucked the other direction to provide to forward facing image as seen.

I ordered these for my 2018 Levante and just installed them. Very easy to instal and so far working great. I was worried at first because I ordered logo projection lights a while back that did not fit. When I opened these, it was the same brand and looked very similar, but these fit perfectly. They were also different in that the old model had a pin connector that you had to plug into the original unit (which was a loose connection). This model has a port that the wires fit directly in, just like the original part (and is a snug fit, so likely will not come loose).

good product, worked well for me