A pack of 1 - 32mm dia x 18mm thick N42 Neodymium Clamping Magnet with M4 Hook from the back. The NORTH pole is on the centre of the front face and the SOUTH is on the outer edge around it (both poles are on the same face). These Magnets are plated with 3 layers of protective coatings - Nickel + Copper + Nickel (Ni-Cu-Ni). Each magnet can support a steel weight of up to 34kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also support up to 6.8kgs in a shear position before beginning to slide down a steel surface under the same conditions. These magnets can be fixed in place using a Clamping Magnet and have a maximum operating temperature of 80 degrees C. These magnets are 32mm dia x 38mm from the magnetic face of the magnet to the top of the hook. The Pot magnet base is 18mm tall from the magnetic face of the magnet to the top of it's threaded collar. The magnetic collar is 10mm dia and has a M4 thread x 7mm deep. The internal diameter of the hook is 8mm and the removed hook is 26mm from the base tip of the thread to the top of its curve. WARNING: NEODYMIUM MAGNETS ARE STRONG AND CAN BE DANGEROUS. THESE MAGNETS MUST BE KEPT OUT OF REACH OF CHILDREN AND ARE NOT TOYS. DO NOT INGEST OR INHALE AND SEEK IMMEDIATE MEDICAL ATTENTION IF ANY ARE SWALLOWED OR INHALED. THESE MAGNETS ARE BRITTLE AND WHEN BROKEN CAN BE SHARP. THESE MAGNETS SHOULD NOT BE ALLOWED NEAR MAGNETIC MEDIA AND ELECTRONIC EQUIPMENT. KEEP AWAY FROM PACEMAKERS AND INTERNAL MEDICAL DEVICES. MAGNETIC MATERIAL IS REGULATED FOR AIR TRANSPORT.
Trustpilot
2 months ago
2 weeks ago
