Description
- Salt electrolysis kit composed by Power supply - Chlorinator Cell - 1 pH dosator pump > Peristaltic pump with integrated pH reading tool > Fit to dose pH minus products > Programming of set point input On an interval of between 7.2 and 7.4 > Semi automatic calibration at a single pH value 7.00 > Dosing proportional to the set point defined > ON / OFF function > Case in PP loaded with 30% talc > Body pump with manual drain > IP 55 protection > Standard power supply 230 VAC
- For best results the concentration of salt in the water of the pool should be understood in a mean interval of about 4,500 to 5,500 parts per million (ppm). Dissolve 4.2 kg of salt per cubic meter of water content in the pool. To obtain the total weight of salt dissolved in the pool in kg, multiply the volume in m3 x 4.2.You can use either water softening salt, industrial salt, special salt for the pool
- At least twice a season you need to supplement the salt in the tank.Salt to add in Kg = Pool volume (m3) x 4.2 - salt concentration in g / l that you have found during analysis.
- To optimize the performance and operation of the electrolysis system of the AUTOCHLOR salt, the pool should be maintained within some of the water balance parameters with the values of the table. PH 7,2 – 7,6 Total alkalinity 90 ppm – 150 ppm Salt 4.500 ppm – 5.500 ppm Chlorine 1,5 ppm – 2,0 ppm
- WARNING * The colors and accessories are represented only for demonstration purposes and may vary according to availability. Specify your requests when ordering
Autochlor RP-PH is a complete and effective automatic processing system because associates the electrolysis of salt water with a pH adjustment. Sterilization salt is an innovative method of water disinfection of the pool created thinking of the natural marine ecosystem principle. The electrolysis system of Autochlor salt to sanitize the pool water is widely used for many years in the United States and Australia, and has certain advantages that make it more and more appreciated in Europe. First of all the excellent water quality, always perfectly transparent thanks to the absence almost total of chloramines, chemical compounds present in the normal chlorine used for disinfection, which often make the slightly opaque water and that more often cause more allergies or intolerances. Prepare the pool for the use of salt electrolysis is easy: you simply bring the salt level to 4,500 / 5.500 ppm, implement the generating unit of salt to the pool filtration and the control unit in a suitable distance, set the desired operating hours, and start the sanitization process. It can be installed in the swimming pool with a simple by-pass kit on the connection pipes to the filtration system.
