1.Transmitter: Distance:0-50m (ideal distance without any block and signal interfere,it would rise and fall about 10%-90% with the block and interfere) Encode: Fixed code, soldering 2262 Frequency:433.92 MHZ Size: 68mm x 48mm x 15mm Power Supply: 2 X CR2016 3V Lithium Battery (NOT included) 2.Control Mode 1)Toggle/Self-Lock: Press->On; Press again->Off Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter). 2)Latched/Inter-Lock: Press->On; Press other button->Off Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter). 3)Momentary/Jog: Press and hold->On; Release->Off Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter ) (Original Setting is Toggle , Change it by yourself.) 3.Receiver Decode: Fixed code, soldering Power Supply (Operating Voltage): AC 110V Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC Work Voltage Range of Relay: AC 110-240V or DC 0-28V Sensitivity:-105 dBm Operating Temperature:-10'C ~ 60'C Size:55 mm x 24 mm x 17 mm 4.Package Included 4 x Receiver (with cover) 2 x Transmitter (no battery inside) 5.Learn code and Remove Code Learn: input the 110V for the receiver,press the learning button until the LED indicator ON.Then press the transmitter ,the indicator flash fast,it means learning successfully. Remove:keep pressing the learning button on the receiver until the indicator ON and flash fast,it means the codes is cleared successfully.
Trustpilot
1 month ago
2 weeks ago
