XR-B, ATX Mid-Tower PC Gaming Case, 3x120mm ARGB PWM Fans Pre-Installed, Full-View Dual Tempered Glass Panel, Wood-Grain Design I/O Interface, 4090 GPUs, 360mm Radiator Support, Black

It's a great tower, especially for the price. If you're looking for a case that won't break the bank, but will look amazing showing off the inside of your computer, this is one to look at. The built in RGB fans look great if you're into that and they provide plenty of airflow to keep temperatures stable. There's room at the top to add a radiator for a watercooler, and also plenty of space for an air cool tower if you prefer. Cable management is easy, with rubber gaskets surrounding the holes and a good bit of space hidden behind the panel. It is a bit of a tight squeeze and I had to apply a little pressure to get that side back on the case, but I am very happy with the final results.

This PC case is amazing! I bought this case to replace my be quiet case that looked ugly, and I switched from an aio to an air cooler. Pros: -Size: Mid tower but has a lot of room -Fans: The 3 preinstalled fans are pre daisy chained which made installing easy. -High quality: The case is super high quality, lots of cable management room, the process for installing the components were easy and straight forward compared to my be quiet case. -Easy to add extra case fans: I bought thermalright c12c-s fans in a 5 pack and installed 3 intake on the bottom and 2 exhaust fans on the top middle. They all connected so all my components have the same rgb showing at the same time Cons: -Glass: came dirty with scratches, I tried to clean it but it didn't come out. Isn't a big deal to me

I recently upgraded my setup with the montech xr Gaming Computer Case, and I couldn't be happier! From the moment I unboxed it, the build quality stood out. The sleek design and tempered glass panels give it a premium look that fits perfectly in my gaming corner. Installation was a breeze thanks to the well-thought-out cable management features and ample space for all my components. I appreciate the tool-less drive bays, which made adding my SSD and HDD hassle-free. The airflow is exceptional—my system runs cool even during long gaming sessions. One of my favorite features is the customizable RGB lighting. It adds a vibrant touch to my rig and syncs seamlessly with my other peripherals. Plus, the noise levels are impressively low, allowing me to immerse myself fully in my games. Overall, the montech xr Gaming Computer Case offers fantastic value for money. Whether you’re a casual gamer or a hardcore enthusiast, this case has everything you need to showcase your build beautifully. Highly recommend!

For the price this is the best bang for your buck when it comes to cases. The actual case is metal and it’s high quality. It doesn’t bend or it’s not malleable, it’s a material you would see in a 100+ dollar case. In addition the glass and back panels are very easy to take off and on. The fans are neatly managed in the back and are very quiet and have exceptional lighting. In addition in the actual case are cutouts for easy cable management and have a dedicated spot for a hard drive, sata drive, and a spot to stuff PSU cables in. The temps are normal when using it, no problem with that. In addition it comes with three dust filters; one on the PSU, side, and top. My PSU dust filter actually came in damaged but the customer service was so fast and shipped one to me right away . This case is such a W and the best in the market for an aquarium style case. It has amazing cable management and looks so good including the fans. Would 100 percent recommend.

Lots of room, airy, easy to work with, easy to hide wires. I LOVE the power button on the lower front of the case, I'm so tired of power buttons on top, it's not friendly for cat owners because those lovable furballs WILL get on top when you aren't looking and switch the pc off. I also dropped the big front panel on the floor, edge first and while giving me a stroke and fear of it shattering, IT DID NOT. Super sturdy. Heavy. Good design.

Based on my experience, I'm giving the case 4 stars primarily because one of the fans are already flickering after just one month, conveniently past the return window I might add (Looked into potential solutions, didn't find one that resolved the issue. Don't use a controller/software(s) for the rgb, I leave the color as default and it's only the 1 fan that flickers so bulb issue?). I also didn't find this out until after, but to my knowledge, Monotech doesn't sell these fans separately, so you'd have to find a replacement fan elsewhere. Otherwise, case works as intended, fans come pre-daisy chained (which is nice), mounts are preinstalled, plenty of screws, magnetic dust filters, and at least 2 reusable cable ties. My takeaway is that the case is overall good, especially compared to other prices. If you buy it off Amazon, make sure the seller is from Montech (Amazon discreetly changes who sells you items without warning so check before buying). If you care about something being potentially defective, it could be best to check computer stores nearby for availability, especially if you manage to also get a warranty for a small difference. I'm not as big on rgb customization as others, while the flickering does bug me sometimes, I'm typically distracted with other matters. Otherwise, I'd probably rate it lower, just because I know there are a lot of people who care a lot about customization. (subject to change this for a replacement fan)

Love this case! Looks great, all the parts in, and I really like the fans (strong LEDs and quiet compared to the Corsair fans I bought). All ports and cables work and 1000w PSU fit without issue but would recommend installing it before running wires into that area. The case is on the smaller size for a midtower (which is what I needed). There was a broken clip and solder piece rolling around inside the case. Had no idea what the clip was for but noticed extra in the parts bag. After my build I went to put the glass panel back on and noticed where the broken clip came from, it's what holds the glass panels to the chassis. Had no idea how to fit them (no instructions worth a damn in the box) and figured it was from behind, but AIO was blocking. Took off AIO and realized that's not how to install the clips. :-( You can fit from the front by putting one side in first and then push gently to pop in the other side. The chassis framing is thin, so always lift/move with both hands to distribute the weight.

I bought this for a friend and eventually bought this for myself if you have a high end rig and a 3fan GPU this case is great it comes with all the things you need. You get zip ties motherboard screws motherboard mounts there's space for a 3.5 inch HDD as well as 2.5 SSD the case easily supports 360mm AIO water coolers and I love the fact that you can unscrew the GPU mounts without having to punch a hole into your case and not be able to use the case it's a big case yes but it's easy to build in there are a ton of wiring options this case is well worth the price I personally hate how tempered glass always is a fingerprint magnet and honestly the cooling is going to be based on your set up if you have a cpu like mine i9 13th gen you'll need a 360mm AIO or a very good air cooler I really would only recommend this case if you are building a very high mid end or high end build this would be a waste of space for a user that just wants a casual pc but maybe they daily drive a console but on the other end if you wanted to build a basic 65W power cpu and upgrade your way to a powerful high end rig you won't need any other case this is future proof and it's not heavy just be careful when you handle the glass I also love that the glass is not a screw tightened build but it uses a push in method that clicks in basically its plastic pins that click into place and I'm pretty sure there are magnets as well so as long as you aren't opening and closing the case all the time then it should last you 10+ years

Très très très bon boîtier avec beaucoup serre fil prend les cartes mère axt et micro atx après le reste je ne sais pas, très jolie avec les vitres en verre trempé mais c’est vraiment un super boîtier pour le prix Achetez le

cost to performance is top notch, very easy to build and it has a lot of space. PREMIUM quality but cheaper. awesome!

Se me hace excelente. El único pero que le pongo es que la parte inferior no está muy bien diseñada para instalar abanicos. Tuve que improvisar con unos tornillos más delgados que los que se supone que son para mis abanicos; no pregunten cómo los fijé. Todo lo demás, incluyendo los abanicos preinstalados, es muy bueno.

Très beau boitier de pc.

The glass broke while assembling pc and can't find a replacement easily.