3m 3M-32516 Headlight Clear Wipes 40/bx

If you clean/sand down your foggy looking headlights, you MUST provide a protective UV coating or they will look just as bad in a few weeks. I've been doing this for years and always use this product...in fact, I even put it on brand new headlights.If I'm putting it on headlights that are already in great shape, I do NOT use the included 3000 grit sandpaper and "rough up" the light. In that case just prep the light with alcohol solution and be sure it is clean. Then wipe the coating on as instructed.If anything goes wrong during the process, I just keep a bottle of alcohol from the pharmacy handy and use it full strength on a rag to wipe off whatever I put on, then start over. If you DO get into a situation like that, you will have some effort involved, but a rag with alcohol WILL take everything off and you simply start over. Just keep the alcohol off your paint.When this coating starts wearing off, the light will look "blotchy", with areas foggy and some still clear. This is when I take the alcohol to the light and re-apply (usually every spring).Once applied and dried, it's crystal clear and hard as diamonds. As you apply the product, you will overlap every wipe just a bit. This overlap area will be a bit thicker and will look bluish when you are putting it on. Don't worry, it will dry clear, but if you look closely, you will be able to see the line. I've not found a way around this yet but I'm working on it. It's pretty minor, you really have to be looking for it so again, don't worry.Other products that are spray-on are most likely just clear coat in a different package, and clear coating a lens has drawbacks. In my experience, this is absolutely the best solution.Cleaning a lens can be done with those sanding kits you can get here or elsewhere, but honestly, the most effective tool I found in MOST situations is a rag, some baking soda, and water. Make a slurry or paste wit water and baking soda, put some on the rag and rub like crazy. Keep your pattern random and the light will get sanded and polished at the same time. The grit size of baking soda seems to work well as a one-step solution for foggy headlights. Once clean, rinse THOROUGHLY and dry the light just as well before applying the 3M treatment.

This is perfect for restoration of headlights. Great price

Great product. I use the wipes once per year on 2 different cars, both of which are always parked out in the elements.

Quick and easy to apply. Not perfect and last up to three months

Excellent quality. Restored the polycarbonate of car headlights to a very seemingly aspect to a new ones.

Ive been restoring headlight since I was 16. I started it on my first car, others saw how clear they looked and wanted me to do theirs. The only problem I had was that it took way too long to tape, prep, spray a clear, and let it dry before seeing the results.I also almost always had a problem with the spray on clear coats cracking as it dried, from either the humidity, temperature or prep, etc. I then found a turtle wax kit that had enough of everything to do 4-5 cars, but never enough clear coat wipes to do more than one set.After buying this 40ct, this is a HUGE time and money saver. I always have 600 through 3000 grit sandpaper and polish on hand, but never enough clear. Now I don't think ill run out any time soon. With this, I don't have to tape anything off (free hand edges of the light, the center of them I use my m12 polisher), it applies very smoothly, and flashes faster than most spray clear coats. Ive done 3 cars with it, and haven't had an issue with it fogging or cracking.I have found that its a little more "troublesome" trying to keep it from overlapping too much and getting thick. So, when it does, after the second coat, ill go over it with 3000 grit (sometimes 5000) and polish again then apply a light third coat. It dries/flashes fast enough that by the time I'm done with one light, I can do the next. Every time, it comes out crystal clear.I would take note, its a good idea to wear some gloves, but if you don't, some rubbing alcohol and warm water will take it off skin.

I used the T-240KT Turtle Wax headlight restore kit on my 2003 Honda headlights. Worked AMAZING! It comes with 4 sanding pads and enough lubricant and finishing polish to probably do the headlights on 15 cars! Drawback? Only comes with one set of sealer. Meaning, meaning enough to seal 1 pair of headlights.That’s where this 3M sealant comes into play. I had just used the T-240KT Turtle Wax kit to restore the headlights on a 2011 Mazda3 Sport . Attached in this review are the before and after pics. But I needed a sealer and so I bought this 3M sealer. The headlights looked great before I used the sealer, but after wiping the headlights with this sealer……WOW!These 3M sealer wipes work GREAT! Headlights look BRAND NEW and are now protected.

Highly recommended for anyone looking for an amazing product that works like magic!

Ürün küçük bir ıslak mendil kadar . Ancak iki fara da yetti.4 aşamalı zımparadan sonre iki farada uyguladım . Hemen kuruyor .Tek ve en büyük handikapı fırça ile boya sürmüş gibi iz oluyor . Yakından bakmazsanız sorun yok.Parlatma iyi. Ne kadar ömürlü olur zaman gösterecek.

Had my headlights buffed out they look brand new, these clear coat wipes I apply every 2 months and I know I could probably apply it every 3 months however, I do 2 months to be safe and I've had my headlights looking good for the last 6 months including through winter, these are actually saving me a ton of money because I'm pretty sure I won't have to get my headlights buffed next year

Does what it's supposed to

Works really well, like anything... it's all about the preparation so don't skimp on that!No long term view yet but did them two weeks ago and done about 700 motorway miles since.I was sceptical about applying a smooth even coat using a 'wipe' but it works really well.Don't expect deeper cracks to disappear completely (for that you need MORE preparation) although they will improve and the coating should hopefully help prevent them getting worse.Two wipes were plenty to do both headlamps, in fact I think they would also have done the rear lights toowhich I'm definitely going to do!

Temizlenmiş ve parlatılmış farların üstüne, güneşten koruma amacıyla uygulanan bir ürün. Son kat vernik gibi düşünün.Uygulama yaparken aynı yerin üstünden tekrar geçmeyin dalgalanma yapar. Bunun yerine ppf kaplama veya 2k vernik çok daha uzun ömürlü olacaktır. Eldiven kullanın.