Osomount 360 Flex Universal Desk Mount in Car Holder Dashboard Windscreen for Any iPhone, Samsung Galaxy, Note & Other Smartphone

I ordered this phone mount to replace a windscreen phone mount I had before.The old one I had was cheap and could only be mounted on the windscreen. Plus it had a flexi arm which had the tendency to vibrate while driving, which would also cause some noise while driving and a constant distraction. After it finally gave up, I decided to go for a dashboard mount this time so that windscreen would be without marks left from the suction.Ordered the Osomount 360 Grip Mount after reading various reviews. Initials impression of the mount is great.The packaging itself is quite neat. The box contains the Osomount 360 Grip mount, an adhesive pad and a manual.I have got a car with a textured dash, so was a bit skeptical about the suction and grip, but not anymore. After having used it for the last few weeks the mount is solidly attached to my dash without any vibration or movement. The instructions are simple enough to follow. Just make sure you clean the surface of any dust before applying. The suction pad is washable so if it get dust on it, you can always wash it off. It says one handed operation on the manufacturer's website but it needs some practice to get there as the clamp is a bit tighter than expected.Once applied to the dash you can then adjust the ball joint to get the correct viewing angle. The phone I am using with this is a Nexus 5 which fits fine. It also comes with a 2 year warranty, so if there are any issues you can always contact the manufacturer and send it back, hopefully without any hassle. The mount is a bit expensive but it is worth its value.All in all a good purchase that I am not regretting at all so far.Update [11/02/2016]: After a year and 2 days the spring loaded clasp on this has broken. Will try and get in touch with the manufacturer to request a replacement under the 2 year warranty period. Has not left me down so far other than this incident.Update [30/10/2016]: Had contacted Amazon about this and was sent a replacement promptly. So far its working well as expected. Just hope it does not break again once the warranty period finishes.

Suction cups always turn out to not deliver over time. However as soon as I took this out the box, I knew I had a quality product. The suction cup is out the box super sticky. Not in the sense that it makes your finger sticky like some cheap stickers do, but sticky like it almost forms a bond with any surface it touches and doesn't want to let go. This is done with an adhesive like surface, which apparently can be washed clean of dust to restore it's original strength. However I will be using sticker backing when not using this to avoid dirt impacting performance in the long term.So it automatically "sticks" to most surfaces. But to create that rock solid grip, you need to introduce the lever which seems to create a vacuum which makes this impossible to remove. Even after lifting the lever I have trouble removing!On the silicon phone holder. It's a little tricky to prise apart, but I have no worries once the phone is in there. It puts good pressure on the phone, without any fears it will slip out, or cause any cosmetic damage to the phone itself. The ball joint and plastic nut screw to hold in place allow the phone to be orientated in many different positions, and if any part were to fail, I would believe it to be this. It's very secure when the plastic nut is secured tightly, but if not tightened enough, the ball joint will move, possibly wearing out the plastic.So in all, I have no doubts this is one of the best phone holders on the market. I don't drive often, so will be using this primarily as a phone holder on my desk. It's perfect for watching movies on your phone too without having to prop the phone against a surface or watching with it flat on a table.

Simply the best window mount I've ever owned. I can confirm that it even fits my new iPhone 6Plus and case. The suction is terrifically efficient - it's never fallen off in heat, or damp, and has been repositioned a couple of times and still retains is effectiveness. The grip is perfect - a decent combination of a tense spring and ridged grip means you don't get any slippage. The best technique for positioning your phone within the grip, however, is to clamp the bottom of your iPhone, rather than the middle (as the pictures show). This stops the phone tilting away from you whenever you press the Home button.UPDATE: 2017I have bought a second one of these for our other car since this review (in a nice white colour).The first one has since had to be replaced - there is a spring in both the left and right side of the grip, and both eventually snapped. However, it's saving grace is that it still functions perfectly well for the iPhone 6Plus with a working spring on just one side or the other (the tension of the spring loaded side against the snapped side is still good enough). Without question, it's still an annoyance, but I lived with it for many more months before the second spring snapped and I was forced to buy a replacement. Considering it get's used daily, I still consider this the best cradle I've ever had, and highly recommend it. Perhaps the manufacturers might consider sourcing more durable springs in the future.

Je suis un habitué de ce produit. Le meilleur support auto, une fois collé cela ne bouge plus, et le téléphone est très bien maintenu. Le grip a cassé au bout d'un certain temps, le vendeur m'a renvoyé une pièce gratuitement en quelques jours.

Ya habia utilizado la version anterior es muy bueno

both my wife and Sister-in-law have the Monitar cell phone mount for their cars and loved them. When I got my new vehicle I decided to get the same one, only to find out through Amazon.ca the price was astronomical. I did a bit of online research to find out the Osomount 360 is the exact same unit, just branded differently. Its rock solid, easy to get your phone in and out of quickly, the phone doesn't bounce while driving. Overall, this is the best car phone mount I've ever used.For reference, I have an iPhone 6 plus with a case, and my wife has the 6s and both fit in this holder no problem

I didn't expect to like this contraption. It was a necessity after buying a new/larger cell phone and it wouldn't fit in the normal spots in my truck. Now I am trying to figure out how I lived without it. I am now able to clearly see and interact the phone's screen (I place it in the left-bottom corner of the windshield) any time I need to. The suction is terrific, the look is classy and it holds the phone with just enough pressure. I think I am going to buy some of these as Christmas gifts this year.

Ja, nun habe ich schon länger ein Mobiltelefon , meist rechts auf dem Beifahrersitz liegen. Bei dem Durchfahren einer Kurve war es dann ab und zu seitlich des Sitzes gerutscht, meist auf der Außenseite, so daß es einer kurzen Fahrtunterbrechung bedurfte, es wieder "hervorzukramen". Die Anschaffung eines Outdor Garmin Navigationsgerätes drängte mich dazu, nun endlich einen festen Punkt in Form einer universell einsetzbaren Gerätehalterung zu erwerben. Das Angebot ist groß, die Wahl des richtigen Produktes schwer.Durch Youtube bin ich auf das Produkt aufmerksam gemacht worden, die Vorstellung war überzeugend. Ich hatte allerdings den Gerätehalter noch bei keinem Einzelhändler gesehen, er schien hier gänzlich unbekannt. Also habe ich ihn bestellt, der Versand (aus GB !!!) hat etwas länger gedauert, aber das ist auch OK. Die Montage an der Frontscheibe war unspektakulär, dafür ist der Sitz spektakulär. Auf der Glasscheibe sitzt der Halter so fest, dass man sicher ohne Mühe die Frontscheibe damit herausreißen könnte.Die Befestigung des Gerätes erfolgt dann über die zwei Klammern, die links und rechts das Gerät "umklammern". Es mag dem einen oder anderen lästig vorkommen, beim Einsetzen der Geräte die Klammern auseinanderziehen zu müssen, die dann beim loslassen stramm das Gerät packen. Ich finde es nicht lästig, der Sitz ist gut und stramm, ich kann mir durchaus vorstellen, daß die Halterung auch Off Road zu verwenden wäre. Als Vorteil der Halterung empfinde ich, daß das zu haltende Gerät schnell aus dem Halter durch Verdrehen des Gerätes herausgenommen werden kann. Auch sind die "Haltebacken" so dimensioniert, daß der relativ dicke Garmin Etrex 30 sicher gehalten wird. Ich komme allerdings nicht auf die Idee, den Saugnapf des Halterfußes auf textilem Untergrund zu befestigen, eine genarbte Kunststoffoberfläche wird eher als Untergrund geeignet sein