⚡ Power Your Passion with Confidence!
The ANLINK 9V 1A Power Supply Adapter is a versatile and reliable solution for powering a wide range of devices, from Arduino boards to elliptical machines. With a 1.8M cord and UKCA certification, it ensures safety and efficiency, making it an essential addition to your tech arsenal.
C**E
Material is very hard but also flexes very easy
I am very happy with this 12V 1A/1000mA plug, its very well made, and I have had no issues at all, I have left it plug in for hours, it gets warm but nothing to worry about and well with in safety limits, the male plug part fits very nice with no metal parts showing, the cable length if very long but that's what I wanted, and the material is very hard but also flexes very easy, so it will be hard wearing for a very long time, I recommend this plug and I will be buying it again in the future thank you
Q**R
Sorted a problem
Replaced a too short cable supplied with lamp
S**Y
Chinese import so no UK power supply
I ordered an electronics device from a well know Chinese on-line retailer audit arrived with a US power supply and I needed a similar UK one. This fitted the bill perfectly, the correct voltage and current ratings.
W**Y
Exactly what was required.
Replaced a failed 9v doorbell transformer. Seems good quality and been fine for 3 weeks now.
P**Y
A Neat 6V 1A Switched Mode Power Supply with a Choice of Four DC Connector Sizes
We have a Usogood trail camera that we set up every night to video the wildlife in our garden. Usually foxes and cats, with the occasional hedgehog. The only down side of this is that it takes eight AA alkaline batteries and they don’t last very long because of the powerful infrared lights needed after dark. The camera also requires the full 1.5V available from alkaline cells and doesn’t work with rechargeable 1.2V NiMH. On the base of the camera is a DC socket, but the makers have inconveniently made this a 6V supply - why it is not 5V to match the millions of chargers used for phones I can’t understand.I was delighted when this small neat 6V 1A switch mode supply came up for review. It is perfect for the camera and one of the four DC coaxial barrel connectors matches the socket. The other thing that needs to be right is the polarity of the plug and with a centre positive it is.The IP20 (no protection against liquids) rating means it has to be kept indoors, but the 1.8m cable will be long enough to reach outside to the camera.Before using it I checked the power supply’s voltage and it was spot on.Although perfect for my needs it might have been useful to others if a few more DC coaxial barrel connectors had been included.
M**5
6v dc 1amp power supply
This can be used with many devices that require 6 volts DC at up to 1 amp.The sales page mentions its suited to some Omron Blood pressure monitors.It comes with a choice of 4 tips, 5.5mm x 2.1mm, 3.5mm x 1.35mm, 5.5mm x 2.5mm & 4.0mm x 1.7mm.The cable length is 1.8mtr and the center pin on the adaptors is positive, be sure this is correct for your appliance. I tested and under no load the output was 6.3 Volts which is fine.I have some security camera's & trail camera's that use 6 volts and its handy to power supply to use with them.
A**I
A really useful DC power pack, interchangeable tips too, perfect for my CCTV camera & Router etc.
These power packs from ANLINK are available, at the time of writing, in several versions, 6 volt, 9 volt, 12 volt, and including 1 or more interchangeable tips at the end. The one I ordered was 9 volt, 1 amp (9 watts) with 3 multi-interchangeable tips (3.5*1.35mm, 5.5*2.5mm, 4.0*1.7mm) for quite a few uses.The cable length is 1.8 metres, and the output is DC 9 volts, Polarity: Centre Positive(+), Outer Negative(-),and so many uses for 9V household electronics gadgets, from routers, CCTV cameras, and more.I tested the power pack with my test meter, (just the low voltage DC side), and indeed it gave just over 9 volts (off load), and exactly 9 volts (on load).This is perfect, because I have seen some really bad power packs which claim (eg) 9volts and show 24 volts on a test meter (off load).By sheer luck my WiFi CCTV camera uses 9 volts, with one matching tip and the same polarity too, so this is just perfect. (My old power pack has 'seen the day' after having a fight with our front door hinges (very long story).Also my 4g internet router works from 9 volts too, so this power pack is great for quite a few uses.Included are 10 images of the DC power pack from ANLINK, and thank you again for a great much needed product.
L**O
Perfect. Good length.
Couldnt find the adapter for my record player. This was ideal and worked with no issues.
M**R
Did what it was intended for
They fit perfect and we’re the correct size I needed!. Still working great!
L**E
C'est pour un ami
Je sais pas encore si ça fait ou pas. Je sais que ça valait la peine pour la qualité prix.
D**Y
Adapter Cord Extensions
Perfect for what I needed! Installed a bunch of WIFI security cameras, but I didn’t want the black adapter cords to run alongside the white trim. I ordered these extensions so that it would look a whole lot better.
L**S
Très bon service
Tout était parfait
A**R
Works for Ionbeam ac infinity.
Not perfect but working
Trustpilot
3 weeks ago
1 day ago