- Phukmlong 2" Wood Lathe Steel Faceplate Chucks with ScrewChuck, 1"-8TPI Thread Woodworking Accessories Tools…

This faceplate has worked out very well for me. I used it with a fairly unbalanced turning, and it did not fail. I bought this faceplate for its smaller size. I included a quarter in the pic for scale. I'm happy with the price and quality. This does not include screws, which was no issue. Remember not to use sheet metal screws with a faceplate, and always wear protection.

I needed a small 2" faceplate for a small bowl I was making. This size was perfect. It seems very well made and fit my 1x 8TPI perfectly. I recommend.

I ordered this faceplate so I could use a 2 inch forstner bit to make a flat mounting area on wood blanks. The first flaw I noticed was that the faceplate is about 1/32 of an inch bigger than 2 inches. This means I had to move blank around on the drill press to widen the flat spot so the faceplate would fit. After that, the faceplate worked perfectly until I went to remove it from the headstock. It was at that point I found that the collar of this faceplate has no flattened areas to slip a wrench on to loosen it from the headstock. I ended up having to use a vise grips to remove it. It worked but over time doing this will damage the outside of the collar. That damage to the collar will be only cosmetic, but over time it's going to get pretty rough looking. Overall, for the price, I think this item is a decent value. But, I hope others will see this review and know what they are getting in to.

good tool

Positive feature is that the machining appears very true, and the face plate is definitely flat and perpendicular to the threaded shank. This is the second one I bought. We live in a Resort which has a very nice woodshop. I like having my own lathe flange, as occasionally I need to bring my work home with more lathe work to do later, and remounting could result in some mis-alignment. The only negative I have is that the steel is not plated. I'm getting some surface rust on my earlier unit. Still fully functional, but not as neat.

Nice size for small projects but the treads are not sized very well. Loose fitting until tightened against the headstock

Good product. Good price. Equal in value to branded.

This faceplate is perfect for those small turning jobs. It's well made and perfectly balanced. No shop should be without one.

It’s so practical for my recent wood turning projects

Wood turning

A good quality product, but because it doesn't have a flat survace to accept a wrench, it's very hard to remove from the lathe.