MARASTAR 21446 15x6.00-6 Tire and Wheel Assembly, Pneumatic Replacement Lawn Mower Front Tire compatible with Craftsman Riding Lawn Mowers, Easy Install Assembly

Actually really nice tires for the price. You get 2 for the price that you’d get one at Lowe’s. Super easy to pop the old ones off and put these on. They’re a pretty durable tire from what I’ve experienced so far. The only complaint I have is there was a good amount of corrosion on the rims and where you attach the grease gun. Not a big deal since they went on a mower and they’re going to get wear and tear anyway. I was still able to slap some grease on my finger and get it where it needed to be.

The size was an exact match with the previous tires that were on my riding mower. Although this tread pattern was much better getting up and down hills, as well as steering. I really liked the fact that they came installed on the rims. It made it super easy to replace them. The grease fitting was at a good angle and easier to get my grease gun on then the originals. The color of the rims matched the ones that came off my craftsman rider exactly. They roll quite smoothly and seem to be built with as good quality as the originals if not better. Great product for the price.

Great replacement tires for my old Craftsman lawn tractor. They fit perfectly and were very easy to replace. Pumped them with air and used them through the summer without any problems. Very durable and hubs and bearings are good so it will last the rest of my mower’s life and maybe mine too! I recommend getting these for your replacement tires.

These wheels seem to be good, although would have liked tubeless instead of tubes in the tires. They were relatively easy to install, but the grease fittings are cheap and one wouldn't take any grease. I believe it was bottomed out and removing it, then reinstalling it without cranking it down too far seemed to work. The head of the fittings are not exactly the right size for my grease gun and stuck the head of my grease gun, but with effort were able to be removed. Hoping the wheels and grease fittings don't fail prematurely.

Perfect fit for my Craftsman YT4000. What's really good is that these tires came with 1) bearings installed, 2) correctly sized rim holes for axle diameter, 3) correctly sized replacement washers and E-clips, and 4) zerk grease fitting on the OUTER SIDE along with the air valve! Tires were also inflated to the proper PSI. Because of these thoughtful features it took 1/2 hour to change both front tires.

I have a 2014 Ariens tractor I purchased at Home Depot. 17.5 HP, 42 inch deck . Had the original front tires because I only mow about 25 hours a year. This year I started mowing the grass and noticed the front tires wouldn't hold air . I removed the tires after jacking the tractor up and put the tires in a barrel of water to see where the leak was. It was leaking air on the sidewalls and couldn't be patched up. I went on Amazon and found these 2 tires. First I made sure what size tire I needed , I looked online and looked on the side of the tires. Look for the proper offset , mine was 3 inchs , so these tires were good.After figuring out what size tire I needed, I looked at several different tires for sale and got these for the lowest price. Grey was a better match for the black rim in the back tires. $54 for 2 mounted tires /free shipping , why even bother fixing a tire ?? I paid $25 to a garden center to mount a tire on a rim. What a ripoff ! I installed these tires hassle free, I put grease on the shaft and 1-2-3 it went on perfectly. These tires are slightly more narrow than the OEM tires that came with the tractor. Cut the grass for a couple of hours and they worked perfectly. Update - 2 years later - tires are still like new and look great. I don't know if this happens with other tires , but when my grass is tall , like 8-12 inchs tall or more because I can only cut once a month, the front tires will skid across wet grass and they lock up. Have to stop, put it in reverse to straighten the wheels out. No big deal for me. I purchased 2 more of these tires - bought a 2 pack for $36 with free shipping. Brand new tires, like new they said. Couldn't pass up that deal.Arrived the day after the order!!!!!!!!

These tires with hubs seem good. It's hard to make a conclusive judgment when we've only been using them for a few weeks. We used these for front wheels on an old Craftsman DYS4500 tractor mower. Although the fittings weren't identical to the originals, the new ones did fit well. The tire tread appears to be at least as good as the originals once were. My only real concern was the poor quality of the instructions, in particular as they applied to what's sometimes called "the dreaded E clip." This is a ring-like, washer-like clip that fits in the groove on the axel to hold the pieces together. The instructions refer to them as e-Rings. If you're a lawnmower mechanic, you probably know how to install them, but I didn't and the instruction to "squeeze clip back on the axel (may need pliers/use force)" is useless. This may make the "dreaded E clip" fly across the barn, or worse, fly up and hit you in the eye if you aren't wearing goggles. Fortunately, there are videos on YouTube that explain the process better. You need to fit the clip partly in the groove with the clip opening in the 12 o'clock position. Then use some wider pliers to pinch from the 6 o'clock position (the outer edge of the dreaded e clip) to the 12 o'clock position onto the axel end, and pinch. It should snap on without flying away. Good luck! The hubs come with grease fittings that I haven't yet tried. Aside from that, so far, so good.

1999 LT1000 Craftsman. The original 2 ply tires can't stop a sandbur sticker. After a season of having to stop mid-mow to get more air, I finally gave in and looked for replacements. These came complete, ready to install (add some grease) directly on the mower. I have now had these for just over 2 years and after installing them I watched as the tires collected sticker after sticker. 4 ply is a big difference. I have yet to put any more air in these. Pre-season prep was just a pressure gauge that showed the correct pressure. They roll good, grip fine, and ride soft enough across 2 acres of pasture with the throttle wide open. I've just restored another LT1000 MTD and will put these tires on it too. FWIW, I still dodge the prickly pears.

Great product. Tires were installed on a Sears Lawn Tractor. They fit the 3/4" front axle perfectly. They came with the bushings installed and each tire has a grease nipple on the tire rim to keep the bushing lubricated. Would certainly buy from this seller again.

Ottimo prezzo

in één cirkel gebrek aan lucht 2 gaten!!!

Perfect for the use

Ces roues comportent bien jante + pneu. La qualité semble ok, le graisseur coudé (plus pratique) est du même côté que la valve (encore un avantage). Attention, ces jantes sont symétriques : il n'y a pas de décalage du moyeu par rapport au plan central (distance projetée entre l'extremité de moyeu et les levres de la jante = 27 mm des 2 côtés) --> verifiez bien ce qui convient à votre machine ! Dommage que ce ne soit pas un tubeless (roues dotées de chambres à air)