A3 mATX Gaming PC Case by DAN Cases, USB-C, High Airflow, Black

Looks: I’m my opinion, this is the one of the best looking mATX cases on the market. I’m not big on LEDs and prefer subtle looks and this case nails that. Compatibility: The case is surprisingly roomy, however, if you’re fitting high end parts in here be prepared for a fight. It’s a bit fiddly getting the PSU mount in the right place and it took a lot of trail and error to fit everything in. For reference, I’m running a RTX 5080, Ryzen 7 9800x3D and a 360mm liquid cooler. I did have to swap out the fans on the CPU cooler to slimline ones though and I would also suggest running these throughout the build to save space. Noise: The case is surprisingly quiet, sometimes I can’t even tell whether my PC is on or not and it’s sat on the desk right next to me! Airflow: For my needs the airflow is more than adequate, I’m not going to be overclocking and the temperatures are very good, much better than my old setup. Functionality: While it’s not the smallest case on the market (and certainly not console level) I think it’s the perfect size and very light and easy to move around. I will be sticking with mATX in the future.

A bit different to build than a traditional tower; but excellent airflow and cooling. Look amazing too with 7 x 120 RGB fans. With the solid faced version (not the wood) bear in mind that it's solid plastic, so you can't rely on front air intakes like regular cases. I ended up going for a rising column airflow setup and I'm getting average case temps of 37C. Super cool... literally! This has allowed me to dial back the fan speeds for productivity and music, but know I have them in reserve for heavy workloads or AAA title gaming.

Honestly had a blast building in this case. Easy to open up lots of options for mounting ssds and the power supply. Alot of space for cables and overall just a fun case to build in.

So this case is in a really good spot in this market, quite compact, decent front IO, amazing airflow, compatibility with hardware cases near this size struggle too have whilst also being cheaper. Now you may disagree with this but I love this cases design though I wish the front panel and the glass panel was more broadly available so I can up it's looks since I got the cheapest one. And obviously since it's a cheap case you'd think it'd be wobbly but no! Without any hardware inside it's quite sturdy and with hardware it's like a breeze block (but a bit more functional than one) Though I do love this case I do have too remove a star for some things I can probably fix myself and with it's price point I can't complain. I wish the side panel had an air filter because I am forced with my setup too have it on the floor or with no arm movement and as you can see in the video I have carpet which is no good. And a nice plastic shroud that could hide the cables which I put in focus under the power supply would be up most appreciated especially since it's probably super easy too 3d print that. Though the functionality with this case has me baffled with how small it is, if I wanted too I could put a 4090 in here or if you push it MSI 5090 or maybe an asus astral 5090 thought I checked in my case 2 minutes ago and it's very close so double check that yourself if you're going too attempt that!! My last thoughts on using this case for the past 7 months? Great price great performance if you want it and you can fit your hardware inside it get it!! (also don't forget how you can fit ATX and SFX power supplies inside of it I really love that addition)

very happy with this case all panels toolless good ports front io has 2 usb a one c and 2 3.5mm audio jacks one headphones and one mic. i think it was a good price u get good space for the form factor very good airflow. if u have a big gpu but want a small case this is for u ps. the wood frame i got separately

It's been a while since i've built a PC using a Lian-Li Case, The last one was purchased in 2007 and is still working through many different itterations of systems. As a system builder i've seen many cases and in truth, I'd forgotten just how good Lian Li are, loads of accessories, ample room for cable management, plenty of space to fit and run cabling for fans, good fitting panels (which are basically all removable) clever design for the power supply and the ability to be able to adjust it's height inside the System (such a nice touch and it works!) USB C, USB 3, Front panel audio and the best of all??? Front panel connectors all in one block! The details matter in a case and this is a great one from Lian Li.

Perfect case due to its minimal look and small form factor . Try not to use a 360mm aio with a full sized atx psu as it can be quite a tight fit and can really put alot of stress on the aio tubes . Can also be difficult to manage 360mm aio tubes if your gpu fits into the first expansion slot on the case right under the i/o but that somewhat depends on the aio that you are using. Overall brilliant case, but best to use a 240 mm aio or an air cooler as it will make the build much easier and will be less costly as you wont need to spend extra on an sfx psu .

Very nice modular case with mesh all over and easy to access components.

Very good case, but you need to plan in advance as it uses mostly smaller parts I used standard size psu and it worked, but would need to replace it with smaller size once I upgraded the gpu to newer 50 series.

Vino rápido y la caja en buen estado. Es preciosa. Buscaba una caja mas pequeña y esta cumple con las expectativas. Aunque es pequeña de altura es larga de fondo. Pero eso no es ningún problema.

Quality is very good

Venant d'un Shift evolv XT en mini ITX, je souhaitais un boîtier micro ATX offrant juste ce qu'il faut de plus en place a l'intérieur pour permettre un meilleur refroidissement que celui offert par la configuration "sandwich" (cm et alim d'un cote Dos à dos avec le GPU de l'autre côté) tout en prenant un espace hyper restreint sur le bureau. J'ai envie de dire mission réussi pour ce boîtier. Ma RX9070xt est très bien ventilé comme mes composants ITX. Alors si la cm et le GPU se sont montés facilement, j'ai un peu plus galéré sur le montage de l'adaptateur de l'alimentation au format sfx. Mais c'est surtout dû a une notice peu clair. J'avais regardé des vidéos sur ce boîtier avant de décider mon achat, et le seul reproche qui lui était fait, c'était sa faible capacité en cable management.... Bah je confirme, il fait a ce moment là, payer son faible encombrement. En effet les possibilités offertes pour le câble management sont hyper restreintes et peu concluantes. C'est vraiment ma seule déception, car pour le reste il est vraiment a la hauteur. Il est très bien fini, la visserie est de qualité, et l'emballage était au top. Pour finir je précise que je lui ai rajouté la façade vitrée (29e de mémoire) qui s'adapte à la perfection et qui rend vraiment bien. Un micro ATX proche de l'encombrement d'un bon mini ITX mais qui ventile mieux.

o Gabinete é muito lindo e incrivelmente bem feito, zero dificuldade para montar. o tamanho dele deixou meu setup mais clean e otimizado