SAVYA HOME® Apollo Executive Ergonomic HB Mesh Office Chair| 2D Lumbar Support| 2D Headrest| Height Adjustable Seat |T Type Armrest|Tilt Feature |Mid Back (Black, Qty-1)

Pros : 1. High back with HEADREST makes comfortable for sitting 2. Height can be adjusted smoothly. 3. Light material (fibre) used + good quality mesh at the back with spine rest 4.SUPER SMOOTH base (NYLON and not METAL) with least amount of friction. 5.SUPER SMOOTH 360 degree rotation Cons : The only drawback that I experienced is its back cannot be adjusted according to your convenience although a small amount of tilt can be achieved with spring provided at the bottom front part of the chair --------- But overall I found the chair to be best at this price (5k) according to my need. Customer service is fabulous and the team supported me while I was facing even smallest issue related to the chair Thank you APEX CHAIRS and AMAZON...GREAT DEAL !

Update (16-Dec-2019) Two days back the chair again started giving problem. Lot of noise. When seated, it was tilting towards left and right. Felt like I will fall anytime. Eventually the screws which locks the gas chamber rod came out and luckily I was not seating on it that time. Finally called the local repair guy and I had to completely replace the below titling assembly, new screws and bolts etc. Costed couple of bucks within 3 months of this chair. So it's definitely not good chair. I am going to avoid Furniture purchase from online including Amazon. Update (19-Oct-2019) Around 15-Oct-2019, I called Apex Customer Care number (9811001822) and complained about my problem. The customer care number is mentioned on Apex Industries page on Amazon and not on product page. So go look there. The attendant asked me to upload a video of a problem to the same WhatsApp number which I did. The next day, I received a call from their engineer who understood my problem by looking at the videos I uploaded. He immediately shipped me new set of wheel base and 4 sets of new wheels along with the explanatory video to remove existing base and re-install the new one. Today (19-Oct-2019), I received the same shipment and I could re-install the base and it seems my problem is fixed now. Wheels are rotating properly and chair right side inclination alignment issue seems to be gone. Note: They did NOT charge me anything for this new wheel base and new set of wheels. I am now extremely happy with their post-update services. Keep it up Apex team. Thank you very much. ---------------------------- Update (2nd Oct 2019):- The chair has become uneven, the left side part is higher than right side part. so, whenever I sit now, the chair is tilted which is not comfortable at all ---------------------------- older:- Received the chair just now and writing this review sitting on top of it. The amazon delivery is as always great. The box came with 4 separate parts and a small toolkit. The parts include the wheel base, gas kit with three cup shaped covers, chair base and chair back. The small toolkit contains L shaped screw driver and Nut tightener. I looked at the YouTube video on Apex Chair channel and could fix the chair. However, when trying to fix the back of the chair, I faced bit of difficulty as the position of the bolts and the holes on the back were not matching perfectly so I had to hammer them a little bit to bring them into a position where the back of the chair then fixes perfectly and I could tighten up the nuts provided. That took me almost 20 mins of sweaty efforts. The chair is comfortable, wheels are sturdy and can be moved 360 easily. The support is great everywhere around the neck, the back and joint. The arms are fixed but wide giving good comfortable position to rest. Overall it's a great deal for me.

Chair is overall good, comfortable. Seller has provided one socket spanner for nut and one Allen key along with the chair for installation. Chair comes in 4 major part- 1. Seat 2. Seat Back 3. Wheel Base 4. Chair Base support & Gas Lift. Installation manual is also provided which is quite easy to read and understand. Assembly is not a big task, one need to unfasten the nuts and allen, put parts together and fasten them. However on the Seat Back part, slot provided for nuts is not perfect, you may find difficult to tight fully with Socket Spanner provided as Base plastic obstruct its movement inside the slots. So you may need to adjust and tight with plier or open end spanner I manage with tilting the socket spanner and get the job done. I have added photograph of the back and one can see polish eroded due to spanner movement inside the groove. Writing this review while seating on the chair.. Chair is budget friendly and good looking. Back support is good however i found head rest is very loose, if i push my head onto it .. it goes backward and nothing to tighten the position. Also height of head rest can be adjusted by push button. Overall chair is good, value for money and one can buy it if not looking for fancy chair and wanna get the work done.

The chair is strudy and very much comfortable. Also, it is easy to assemble. It is been 11 months since I bought the chair. It is still good and intact. I use it daily for more than 10 hours. After 3000 hours of usage, the centre iron plate is cracked. But I got the free replacement immediately. Also, the customer support is really good. The warranty claims are very easy and simple. It is enough to send an email and they called me and sent the replacement spare part immediately.

Assembling it was slightly difficult as you have to lift the lower half in your hand and pretty assemble it up side down to properly do it. And after using it for a few months, one of the screws that join the seat with the base of the chair came off all by itself. I put it back in & tightened it, seems to find for now, but now I have to keep checking every day if they are in the right place. It's a fairly cheap product, I guess at this price you can't really get much better than this. The plastic is good. Seating comfort is not excellence but not bad either. I wouldn't recommend it to any body above 90kgs, I am 85kgs, & when I recline, it sometimes makes scary sounds.

1. Product support is top notch. 2. Chair performance is very smooth and satisfying. 3. Cushion and mesh quality is good too. 4. Paint quality is average but the overall build quality is good if you use "carefully". 5. Pricing of the chair is soo much affordable.