Oven Range Gas Ignitor WB13K21

While it did require some cutting and splicing of wires, the instructions were clear, and the oven works like new. The oven was taking a long time to light and finally did not light at all.

Je suis technicien en électroménager, j’installe toujours ce modèle et je n’ai jamais eu de problème et dure aussi longtemps que l’original a moins chère.

Bought this at the same time as the higher priced original.Put this one in a year ago and it is still working fine.Original is on the shelf waiting.

This replaced the original broiler igniter on my 2004 GE JGBP90 Range on 7/17/22. Igniter part number 13K0021 or 13K21. FYI, broiler and bake igniters are the same p/n, as should be expected. I will update on durability if it is too short.Installation was trivial, but it did require pulling the range forward for back panel access. 1/4' socket driver for 5 screws total; 2 for the igniter, 1 for the wiring exit cover, and 2 on the cover shield mounted on the back panel. It was an exact wiring plug match under the rear shield. It did take some flexibility to reinstall the igniter screws (from the left) as it is inside, top rear of the oven opening (even with the door off (open to first notch and lift off door). I did exercise some care pushing the old and new plugs through the back panel as there some insulation to go through. Once the igniter and exit cover were screwed back on, I tried to gently rearrange the insulation from the back before reattaching the shield. The igniter came in a nicely padded Robertshaw box labeled Oven Igniter p/n 41-216. I also like that it says it is made in the USA.

The igniter was a exact replacement for my GE gas oven. Installation was self explanatory as there is only two screws and a plug, however there isn't any direction in the box other than consult a professional. But it didn't affect the ability to install it. I did look it up on you tube because it seemed odd the way the original part faced. What I found was GE installed the original one backwards,shielding it from the gas and making it take forever to light. Installed the new one and it lights right up .