Tesseract 1.75mm PLA Premium Plus 3D Printing Filament (1 KG Spool) - White

-Strength Strength of this PLA is on the higher side. I have used this filament to make a stand for my ender 3v2 which dampen the vibration during operation. Till now it works smooth and fine.*Low infill will help you save material and increasing infill line multiplier it help you Increase strength which is very effective with this filament.Compliant mechanisms can be made even though it is brittle because it holds much load before fracture. It will fail no doubt to it "but how long does it take to fail" matters and I am satisfied with this.-Bed adhesion Company recommends to use heat bed @60degreeC and with that configuration it works well. Since PLA usually don't require heatbed I tried without heating the bed and printed but it seems to warp a bit for longer prints but if you want it to run so, use a glue stick which adds to bed adhesion. So it's better to stick with company's guidelines here.-Quality Filaments measures up to 1.73mm just like they have claimed to be 1.75mm and they have mentioned a tolerance of 0.02 so it is okay. Since the filament Dia is almost the same we can use it for tight fits and those require high accuracy like fits and joints, holes, etc. Calibration cube measured close to 20mm which is as expected.-Overall value I ordered this particular colour because I wanted a lighter colour which close to Stock ender 3v2 theme i.e blue so that I can print upgradable parts which I have attached a few among them.This colour is same as advertised by the company and it looks cool.Comparing it's price of around 1000 rupees it is worthy and definitely recommendable.These guys have a collection of PLAs of different colour&composition. I will try them too.Initially I was doubtful to purchase from Tesseract due to reviews like filaments breaking and spools went unusable etc, but if you are facing that issue directly contact the service centre through the number given in the filament package, they do offer great guidance and they would approve a replacement if it is found to be genuine.Preferred setting(Ender series of printers)Hotend temperature = 200degC (0.4mm)Heat bed @ 60degC*My paint jobs are terrible

CONSMajorly, its creation problem in adhesion. It has impurities which blocks the nozzle and the heat chamber....Secondly, the filament is poorly winded. It need manual unwinding, you wont be able to leave the printer to automatically extract the filament due to its poor winding as a result it is not able to extrude right amount of filament......resulting in missing layers, improper adhesion and shape loss of the print.Kindly workout on your quality and winding.PROS- Color and slight shine.- One thing only which happened once...when I had a print with initial layers of thr filament at that time the print quality was great...

Good filament

Pla filament came in closed sealed pack. On first glance product was properly rolled and even thickness. Directly printed customers requested print. Print came flawless.... Awesome quality and detail..Printed multiple parts and all turned up good.Pictures added for filament guide for my ender 3ProsEven thickness, vaccum sealed, filament roll comes with slot for holding filament.

Decent quality PLA, had very good prints with it, went upto 120mm/s with my fully modded ender 3, still had very good prints. Quality of print depends on your skill, the price looks okay for me.The texture is on the rougher side, I like it. Looks like absorbed less moisture than others, printed it on about 195-200 temperature range. Didn't see any wrapping or tangling.

The filament is dusty and slightly undersized. I suffered three or four clogs before figuring out the best setup. A filament filter is required to prevent clogs. Oiling the filament seems to help. The color is a very dark purple as can be seen when held upto light. I had to print at 205°C to get good layer adhesion. Fevistick (only from Fevicol) works as a bed surface and holds onto the print well. A part cooling fan is also required. The filament will break if kept in a bent state for too long i.e. inside the printer feed tube.FYI the seller offered cashback for a positive review. I did not take the money. This review is my honest opinion.

Very good filament. Good in quantity, accurate color and winding and no blockage in nozzle.

Don’t buy anything from Tessaract. Very dirty filament right when you open it. Poor manufacturing standards. This dirt will clog your nozzle. They horrible filament spoilt the nozzle on my X1C!