AK Interactive Modelling Grey Putty 20ml

Be aware that this stuff is about half as thick as toothpaste, I thought it was going to be thicker. I am not disappointed though, the opposite. This stuff is very easy to work with for 3D prints. I used a flat knife to apply and it went on easy and stayed in the same shape as I laid it down in. It stuck like it was part of the model and it is very easy to sand and finish with wet and dry. Again, no trouble painting it, the primer that I used is for plastics and it behaved exactly the same on the printed parts as it did on this putty. It's excellent stuff for hiding print lines and minor print faults.

I originally bought some Revel plasto because thats whats the loca shop stocked, its awful - inconsistant mixture lumpy in places and very sticky and glue like and hard to smooth - after trying AK putty its now in the binThis stuff is fanstastic - nice consistantcy, easy to apply and you can smooth it out very easily to reduce the need for sanding

This is a pretty good filler, dries to a nice neutral grey but will shrink if you try and use too much. It’s okay but I miss Squadron Green Stuff!

This filler is very slightly thicker than the Valejo white filler and as such I found slightly easier to use. Smooth over with a wet finger and finish off with 800 or 1000 grade wet & dry used wet when cured (overnight). Highly recommended.

Good in use to fill gaps and holes in a fibreglass model watermill. Set relatvely quickly. Able to be filed and sanded. Painted up well with Hombrol paints.

Great product great delivery

Best putty used

This is the first time I've used modelling putty. So far it has done what it said it would do. I have used a small amount applied with a piece of plastic but applied more on second part with a paintbrush fresh from the tube and I put the screw cap back on soon after getting what I needed. Sanding off and scraping off with a scalpel carefully worked well and it has worked for me so far.

Eignet sich daher nur für das Ausbessern von Fugen. Eignet sich nicht wenn dick aufgedragen oder zum Modellieren.