iCUE LINK TITAN 360 RX RGB Liquid CPU Cooler – 360mm AIO – 3x RX120 RGB Fans Included – Fits Intel LGA 1851/1700, AMD AM5/AM4 – iCUE LINK System Hub Included – White

Honestly, this cooler is awesome. I’ve used a few AIOs before, but the Corsair TITAN 360 RX is next-level. Setup was super simple—just one cable thanks to the iCUE LINK system, which means no spaghetti mess in the case. The white finish looks clean and the RGB is ridiculously bright and smooth. It makes my whole rig look like something out of a sci-fi movie. Performance-wise, it keeps my CPU temps low even when I’m gaming or editing for hours. The fans are quiet, and I barely notice them running. Plus, it works with all the latest Intel and AMD sockets, so it’s future-proof too.

Extremely clean - Almost no visible cables. Great cooling - Handles the hottest modern CPUs like my I7 13700K. Easy installation - The fans are pre-installed and snap together, it's preinstalled with thermal paste too. Future-proof - Fits the newest PC parts RGB is high quality and customizable Bit expensive but its worth it Amazing connectivity Idle temps in image

Modular, affordable, easily installed. It controls everything. Fans, pump, ram, gpu rgb. Yes I bought the lcd screen addon - about £85 if you want that too. I use the fan curve control in iCue software to stabilize the fan speeds, to reduce annoying variable wining noise. Has reduced my cpu temperature massively (AMD Ryzen 9 7950x). The rgb is fun to setup. One point to note - 1 of the fans was RGB oriented 90 degrees out of sync with the other two and in the wrong sequence order during rgb patterns. Fixed by making iCue learn the fans and in "Mural" tab, you can re-order the fans and rename them in order again and get back the sequence to be correct. The sofware is quite smart for it. Select the hub (not the fans) in iCue, to change the hardware calibration of the fans, before going for lighting options for the fans themselves. Last note - do your homework on dimensions of your case first and learn the CORRECT ways to mount this to not cause air-pocket problems to the pump. Youtuber jay2cent talks great about this. Enjoy the light show!

I got the Titan 360 as an upgrade to Corsair H100i (which was a bit lacking for my 265K. Perfectly fine under normal use but it would get a bit hot under very heavy loads.) The installation was pretty straight forward - you just need to follow the instructions which can be also found online thanks to a handy QR code which is seen as soon as the box is opened.) There were a couple of minor issues. I initially couldn’t find the screws but they were in the bag for the AMD brackets! Secondly due to size of the rad the supplied iCUE cable was a bit short (you get 2 x200mm and 1x 600mm) for my setup. Fortunately I had bought a spare 600mm cable so was able to use that. I would suggest before removing any existing cooling solution just check that the cables go where you need them to go. The preapplied thermal paste is always a bonus as well and the iCUE software works well - as I already had it installed it spotted the new AIO instantly. Obviously the main bit - how does it do? With the previous H100i my 265K package temps reached 77C after three 3 runs of Cinebench and hit 104C after a 10 min Prime95 run, (with 6 Pcores 90C or higher) With the Titan it was 73C with Cinebench (quite nice) but more impressively with Prime95 only 96C. One Pcore just reached 90C, one at 84 the rest 80 or below) So worth the outlay.

Upgraded from an older Corsair 240mm model to this 280mm. Made a huge difference in temps and noise. The 240 was constantly up and down, and compared to my two 140mm intake fans, it was very noisy. This one sits at a much lower RPM and even when it spins up the noise level is much lower while also providing far better airflow. I've never been a fan of the iCue software, it still doesn't offer enough functionality for me. I could not get Argus Monitor to work with this AIO unlike my previous Corsair, but 'Fan Control' with the icue add on worked perfectly and I'm very happy with the setup. 2 things to note! It's been a while since i changed AIO (about 5 years!), and you do need to run it in at a high speed to get the bubbles out at the start as it was making a bit of a rattle. This dissipated after a few mins with the pump at full speed. Secondly, there's no printed manual (which is fine, waste of paper most of the time!), but Corsair's online guide is horrible and makes it seem like you need to make a loop with the power cables and fans. You do not, you can simply click the fans together and plug one of them into the control unit. A guide wouldn't be needed with normal fan connectors, but the iCue system is unique to corsair and has proprietary connectors which confuses matters. All in all, very happy and managed to fit it in the side panel section of my Fracal North case. Oh and yes, you can turn all the RGB completely off in iCue, save it as a hardware profile and then uninstall iCue if you wish.

Corsair is the brand i use and this TITAN series is the probably the quitest AIO i ever owned, just one cable that connects all, super happy with this cooler, 5stars

It's a solid, robust feeling cooler that works well and comes with everything you need to install. The fans are practically silent when set up and the RGB works flawlessly with the controller and software.

Solid gear! absolutely love it, works perfectly and easy to assemble

O meu gabinete é médio. Comprei com a intenção de evitar um "visual de amontoado" no interior. Cumpriu o objetivo. A instalação é bem fácil e o cooler é silencioso. O sistema Icue facilita a instalação e acaba com aquele monte de fios finos das ventoinhas convencionais. Diante da experiência, a ventoinha do painel traseiro do gabinete será Icue também.

Already installed so far so good.

Mantiene muy fresco el procesador, con 80% de uso apenas llega a unos 70°C, quizá un poco más. En juegos poco exigentes el proce está tranquilo en 60°C

Ich habe die Corsair iCUE LINK TITAN 360 RX RGB AIO in Weiß gekauft und bin damit absolut zufrieden. Besonders beeindruckt hat mich das iCUE LINK System, das das gesamte Verkabeln extrem vereinfacht. Statt dem üblichen Kabelchaos hat man hier eine klare, saubere Lösung, die richtig Spaß macht – einfach anschließen, alles wird automatisch erkannt, und der PC sieht direkt deutlich aufgeräumter aus. Die drei RX120 RGB-Lüfter liefern eine sehr schöne und gleichmäßige Beleuchtung. In meinem weißen PC-Build sieht das wirklich fantastisch aus, gerade weil die Farben kräftig, sauber und sehr hochwertig wirken. Das Design passt perfekt zu einem hellen Setup und macht optisch richtig etwas her. Auch die Kühlleistung und Lautstärke haben mich überzeugt. Selbst unter Last bleiben sowohl Lüfter als auch Pumpe angenehm leise. Die Temperaturwerte sind stabil und sehr gut für eine 360-mm-AIO. Alles lässt sich problemlos über die Software steuern und anpassen, egal ob Lüfterkurven oder RGB-Effekte. Die Software iCUE selbst ist nicht ganz mein Geschmack, aber da die Leistung der AIO und der Lüfter unabhängig davon hervorragend ist, beeinflusst das meine Bewertung nicht. Das Produkt an sich funktioniert einwandfrei – und darum geht es hier. Fazit: Eine leistungsstarke, leise und wunderschön beleuchtete 360-mm AIO, die besonders durch das iCUE LINK System glänzt. Kabelmanagement extrem einfach, Lüfter top, Optik perfekt für weiße Builds. Für mich eine klare 5-Sterne-Empfehlung.