Photon Mono 4

Great printing 90% of the time. I did experience some leveling issues in the back corner, but was not a big deal. The quality of the prints were very good, especially for the price of the printer, although it had a smaller print size than I was expecting, which had me constantly having to adjust the size of my model. Most of the time the prints were very accurate, although some of the time, especially when I was printing larger things I would experience some warping. And in one specific case when I was trying to print a light saber that came in many pieces it straight up just didn’t print a few of them. I don’t know if this was a printer error or a computer error but something happened that caused like half of the parts to not print. The resin vats did have a tendency of breaking, which was annoying, but not too bad, and may have been my own fault. although it did cause me to have to replace the LCD screen, which surprisingly was not that expensive and I think was only like 25 to 50 bucks. One thing I will say is it doesn’t work great after your friend punches it because they don’t know how to play VR and set up their boundary way too close. Although this is not the printer’s fault, it did give me a good chance to see how easy it was to clean seeing as when my friend punched it. It was in the progress of printing. It is very easy to clean, and if you approach it with common sense is not too difficult to take apart and deep clean.

I got this resin printer because I had a client that needed some things that just required too much detail for a traditional filament printer to handle. I went with the mono 4 because I didn't need large capacity or anything fancy, just an easy to set up and use printer. For it's price, this is a heck of a deal. Set up was easy and I was printing within 30 minutes. Build plate adhesion is excellent, so long as you pay attention when slicing. Resin typically sticks stronger to the bed than you would expect if your'e coming from FDM, so be aware of that. The speed of printing and quality were what I expected, and both were very good. You can achieve resolutions small enough that layer lines are virtually invisible. As for the smell, that's a part of any resin printer and will vary depending on what resin you're using. I ended up putting it in our garage so I can vent it outside and really only notice it when I remove the hood. Of course PPE is strongly recommended.

I was a little hesitant about getting into resin printing, but the ANYCUBIC Photon Mono 4 has completely won me over. Right out of the box, setup was quick and straightforward. The instructions were clear, and within an hour, I had my first test print done. The print quality is fantastic—sharp details, smooth surfaces, and minimal layer lines. I’ve printed miniatures, custom parts, and even some intricate models, and everything has turned out beautifully. The monochrome screen speeds up print times while also lasting longer than traditional LCDs, which is a huge plus. I also appreciate how user-friendly this printer is. The resin vat and build plate are easy to clean, and leveling is simple compared to other printers I’ve used. So far, I’ve had zero failed prints, which speaks to how well-calibrated this machine is. If you’re looking for a reliable, high-quality resin printer at a great price, this is definitely the one to get. Highly recommended!

This printer is my first foray into printing 3d models of characters and the setup was quick, and quite easy despite that the leveling is manual it is also straightforward, and the overall user experience is beginner friendly. I really like the laser-engraved build plate and resume function, plus the included tools helped me out quite a bit for a first print. Print quality is consistently high, even with minimal settings tweak on the slicer, I did notice some lines on my print but I feel like that is more due to my settings and trying to understand things. However it also has its downsides which include a mostly plastic build, a small low-quality touchscreen, and a slicer (Photon Workshop) that can be buggy, so I ended up using two slicers with the Photon just for printer settings and export. ALSO the biggest downside is the FEP is a whole unit complete and stretched that is not compatible with any other models and you do need to buy specifically, which I had to do it asap due to it quickly making my prints fail due to the lightest scratch. Still, for the print quality and price, it’s a great entry-level resin printer with good results.

This is a great 3d printer! I am a beginner and have never even touched a 3d printer. The instructions were so easy to read and follow! Its actually a very convenient height and it is not so heavy that my 12 year old carried it effortlessly. It makes like no noise! It made a project in 3 hours didn’t hear a thing. If you are a beginner get this printer it will make your life a whole lot easier. When the time to print something comes along print the vat. The vat is not included but you can print your own so don’t be like me and print something useful.

First couple of prints were great and the software was pretty good however I quickly ran into multiple issues usb port started acting up and would only pick of the files only so often. There is no clear instructions of guide to the settings on the machines everything must be learned through your own research and failure. The cherry on top the resin vat started leaking leaving cured reain on the lcd screen completely ruining the entire thing. I cant really say id recommend especially for beginners into this hobby. Ive started a return on this product but and will be sending it back but not confident ill even get a refund. Which honestly this thing has been such a headache I dont care if rather just not continue looking at it.

Fantastic resin printer. My first resin printer, and very easy to use. My second Anycubic product, and have never had any issues with them.

Stampante veramente ottima

Hola buen día, adquirí este producto con ustedes, me gustaría que me dieran orientación ya que la impresora no reconoce los archivos de la usb que agregue para imprimir, si reconoce y ya imprimí los archivos muestra que traía la usb Muchas gracias

Impressora incr'vel. Tinha uma antiga photon e esta supera em tudo, desde tempo de impressão, qualidade da impressão e extremamente silenciosa (nem parece que está funcionando). Recomendo

los fallos de impresión son maso menos comunes y con esta cosa aprendi lo que es una quemadura quimica y clavarme una espátula en el dedo hasta el hueso, a pesar de todo no me arrepiento de mi compra, yo y mis figuritas lo aprobamos

Cuidado con esta impresora, al parecer todo el lote viene con la misma falla del eje "Z" axis imposible realizar calibración, mucho menos usarla, ya hice retorno del equipo y volví a comprar pensando era una falla aislada y no, la 2da que compré llegó igual.