Optimum Hyper Foam ONR Rinseless Foaming Car Wash Soap – Spray-on, Agitate, No Rinse, and Dry – Rinseless Car Wash with Foam and Polymers (32 oz.)

Love this stuff! Even though I have access to water, I still prefer using Optimum Hyper Foam ONR because it’s so quick and effective. I use it with a foam cannon, and it gives off a nice, rich foam that clings to the surface. Most of the time, I just spray it on and wipe it off — no rinse needed — and my car comes out spotless, shiny, and super smooth every single time. It makes washing my car so much easier and faster, especially for maintenance washes between full details. The finish it leaves behind looks freshly waxed, and there are no streaks or water spots. A little product goes a long way too, so it’s a great value. If you’re looking for a simple, high-quality product that delivers professional results with minimal effort, this is it. I’m hooked!

Works amazingly well. My car is full PPF'd and ceramic coated. I remove the surface dust with a duster, spray the Hyper Foam with an electric sprayer, wipe it down and the car dries with zero residue or streaks. Highly recommend.

First use, my IK Foam sprayer didn't have the dry foam adapter, so I ran medium like I always do for Optimum Power Clean. Second mistake was that I used 2oz of Optimum Hyper Foam in the IK. As a result, the Land Rover suffered that typical faded black on all the window trim parts which I subsequently had to polish out and seal (with Optimum Hyper Seal). I sprayed the vehicle and then used a red sponge and a bucket of ONR Wash and Wax. The car cleaned up great. But there were streaks. It was a PITA to wash with the over concentrated hyper foam and ONRWW. So, my second attempt was much better. 1. IK Sprayer dry adapter. 2. Only 1oz of Hyper Foam in the IK 3. Wash bucket and red sponge with regular ONR. 4. Opti Seal drying aid. Do more than 1 panel at a time. I did hood + front fenders. Then one side of doors. Then roof. Then other side of doors. Then the trunk + rear quarter panels. Results are stunning when combined with a bucket of ONR - which I know, defeats the purpose of going with just the foam in the first place. But look at the foam as a presoak before you ONR. It cuts the dirt, grime, bird dope, etc while it dwells (which is what ONR can't do on its own with just the bucket method). TLDR - Yes. Get it. Use only 1oz rather than the directions on the bottle which are too much. Use the dry IK adapter. No ONR bucket necessary but if you use the red spongez you need the bucket. I have yet to try a thick mf towel on the foam because I work on dark paint. Still not comfortable trying with just a foam spray and mf towel unless the car is clean and needs a touchup. If you have ONR and love it, this will satisfy even more when using Opti Seal as a drying aid and ONR in a bucket with the red sponge. That's the combo that works for me.

I use this in an inexpensive rechargeable hand operated foaming sprayer (on Amazon search for "Foam Sprayer, Electric Pressurized Foam Sprayer for Car Washing, 1.8L Cordless PP Foam Spray Bottle for Garden, 2000mAh Battery"). This is great for soaking and cleaning wheels & tires and also pre-soaking your car. It is great at encapsulating dirt/grime for a marring free wash. It has great lubricity and does not remove your existing protection (wax or coating). on a car that is only dusty I foam it with this, rinse some of it off with distilled water, and then dry.

I was a long time user of Optimum No Rinse car wash (despite rinsing it, LOL). So I was looking for a winter washing solution that's essentially waterless/rinseless. This stuff does work, but as some of the other reviewers have mentioned, the recommended 2 oz to 32 oz of water is too much. I tried 1 oz to 40 oz of water, and using it with an electric foam sprayer. It foamed well and it cleaned up my car pretty good, but left a residue behind. If I buffed it out with a clean microfiber towel, it would come off, but that's A LOT of work. Since it's middle of winter here in NJ and it will rain/sleet/snow later in the week I'm just gonna leave it for now. We'll see if that ends up being a mistake. My next wash I'm going to try just 0.5 oz to 40 oz of water and see how that fairs. I'll update this review later, but on first impression, it does work decently at being a waterless/rinseless wash, but leaves a messy residue behind.

Good rinseless wash I don’t use a former but it cleans well.

My neighbor has a foam cannon. I ordered this to try in lieu of ONR. While it was fun to foam my vehicle, I don't think there was any difference in performance from ONR. I like simple, quick, and efficient car washing. I think getting out the pressure washer is too much for no perceived gain is too much. I don't think there is a need for foaming other than to sell products based upon youtube videos. Just my opinion.

I've been detailing cars for over 3 decades and have used other products by these guys but this one I have to say it didn't live up to all the hype on YouTube. Now dont get me wrong, it does a good job at encapsulating surface dirt, however it doesn't loosen it from the surface as other similar products I've tried. The part that I don't like is the fact that it "dries" out the paint after use. I suppose it's doing its job by removing dirt but it seems to strip wax at the same time? Maybe it's just me. I guess I'm one who likes to try new product trends to see how it compares to my current product annd unfortunately this one didn't live up to the snuff, but it's just soul y based on my personal experience, dont take my word for it. Give it a try and judge for yourself.