Wood Stain Oil - 75 ft² - 140 ml, Walnut – Wood Finish for Interior Furniture & Floor - Linseed Wood Oil - Fast-Drying-Environmentally Friendly - Extra Durable Hard Wax Oil-VOC Free

Almost foolproof to use and has a fantastic finish. One coat and done. This is now my go-to finish on furniture. I hope it's durable, but the review videos make it look good for anything other than maybe a kitchen table. It took about 7 ounces to do this credenza, which is truly amazing. A little goes a long way. 10/10. Highly recommended.

First of all, let me state I’m relatively new at woodworking and finding a coating system like this has been a game changer. I had scheduled in a last-minute craft show for my products and had less than a week to produce enough products to set up my booth. After a few months of researching Natura Onecoat and a few of its competitors I was finally put in the position where I needed to finish multiple pieces in the matter of hours versus days. The results were absolutely amazing. After the first day of the show, I had sold quite a few pieces and needed to produce more that night in order to rebuild my stock. I was able to machine sand and finish over a dozen charcuterie boards, and other items all in one evening. Per their instructions I only sanded everything to 120 (well 150 because I ran out of 120) which only took a few minutes after my products came out of the drum sander. I was very nervous because I couldn’t wrap my head around how it was going to be a smooth finish once I applied their product. As promised after going through the proper steps of application, I buffed my pieces dry and the results were shocking. I was left with a beautiful satin finish that made the grain and color of the wood pop like I’ve never seen before. The compression curl in one of my boards had a 3-D effect And only took 15 minutes to do. This allows me to bring over $1000 more dollars in products between day, one and day two of the show. My customers were amazed of the quality of finish for the items that they end up purchasing. In all I was able to finish over $2000 worth of wood products and used just under a half of a can to do so. I would have spent dozens of hours over the course a few days to finish these products with industry standard finishes, such as poly. Instead, I was able to produce more products which is incredibly valuable to a small business. Secondly the customer Service of this company is absolutely amazing. I posted a question on their website about a specific use of their product that it wasn’t necessarily intended for. I didn’t just receive a email reply I actually received a call around 6pm from Turkey (3am there) from one of the creators and executives are the company. He was able to answer all of my questions and we had a great conversation about his product. Informed me there are some great things to be released that is going to be a game changer to woodworking, for that I’m really excited. So here’s my recommendation, pull the trigger guys and gals. Give this product a shot!! Not only is it extremely inexpensive for the amount of wood it covers, you will also be able to spend more time producing because you’ll have a fraction of the time spent finishing……. Time is absolutely money. And if you’re up in the air between these guys and the competitors that we all known the names of. Watch the video from the wood whisperer on his blind stress test of similar products. These guys win, hands-down, and still are a third of the cost.

A lot of other reviewers complained that the can came dented. Mine was not. I also did not have a hard time opening it. I actually fount it very easy to open. I must say this is the first tine I have ever used hard wax oil and I am in LOVE. This product is very easy to use, it is a little thicker than I thought but goes on very smoothly. I do recommend using a syringe to get the product out of the containers and mixing them in a silicone cup for ease. The product is easy to apply let sit for about 5 min then wipe off excess and buff with cotton rag it dries quickly and is not at all tacky to the touch. We did apply a second coat for additional protection as it went on the dining room table my husband and I made. The finish quality is a satan like finish but not like a satin polyurethane. This is a clear color and does not affect the color of the wood. Or turn the wood yellow It just brings out the woods natural beauty. With this product you can actually see the wood grain clearer and felt it better than with a poly finish. I will never go back to using polyurethane when finishing my wood projects.

Overall, satisfied with results. Much less durable than a urethane, but easier application. Used on an ash bed frame, resulting in a nice natural look with some protection. Have some knicks already from use.... 2 months, but that is expected with this finish. When they get noticeable will try repair application. Very, very strong smell at application and for ~5-6 days after. Finished in basement and could smell on other levels. Next time I use this, it will be in summer and in garage or outdoors. Smell faded completely after a few weeks.

This was a perfect fit for my application. Some tool handles on an antique tool. It went on flawlessly and was easily applied. Wiped off of the overlap areas and the wood “drank” it up with abundance. It hardens in the perfect time. The color was a perfect choice for the raw wood. I’ve included the before and after to demonstrate the finished product for reference. I think the product is perfect for protecting high wear areas like handles as this stuff hardens fairly hard without that overly sloppy gloss look. It brought out the wood grain appearance front and center for the piece quality. I’d recommend this, for a higher quality piece with that understated quality finish.

If you don't want your natural wood to look like it's got a plastic coating go with this! It enhanced the wood made it beautiful but it's still fills and looks very natural. I have a white oak butcher block and I applied to this color to it. It was easy to apply and dried very quickly no top coat required!

This is a brilliant product. After stripping 4 orange pine chairs I used this and they are now a warm white. Will purchase more as I have a dining table to work on so that the chairs match it. The wood feels smooth and has a soft shine. No smell at all and very easy to use as long as the wood has been well prepared.

I use this about once a year to refresh my dining table it covers scratches and places where the stain has rubbed away. Very easy to use

Now my go to monocoat for my woodwork items as slightly cheaper than Rubio. It’s a two part which helps it to cure pretty quickly. I buy enough each time for what I need as it does tend to skin over in the tin over time once it’s opened. (The other brands do this as well so not unique to this brand, I try to clean the lids to stop this.)

Easy to apply, easy instructions to follow throughout. The soft white hasn’t taken the natural colour away from the oak, just given a very subtle white washed finish. Has sealed and protected as it should. Would recommend

I've been using a well-known brand for a while and was recommended this by a fellow woodworker. Certainly lives up to they hype, I'd go as far as saying I prefer this to the more expensive well known brand. Great colours and a solid finish