- Lens Plate for Nikon Nikkor Z 180-600mm F5.6-6.3 VR Lens, Replacement Foot Mount - Arca Swiss Style

EXCELLENT

Quality and size

I bought two of these, one for the Z 70-200mm f/2.8, & one for the Z180-600mm f/5.6-6.3/ Well made with a nice finish. My only complaint is that if you have a teleconverter or a heavy camera, the supplied plates are not long enough to properly balance the camera/lens combo on a tripod, especially if you are using s gimbal mount. I was planning on returning both, but them I found other uses for them, I hope I can find longer plates from Leftfoto, as they are nicely done.

It comes with all that's needed - Allen wrench, and what I like most - the hand tightenable screws. There are two supplied. You insert them through a larger hole to get into their collared positions. Now I would've prefered that you instead have to thread them through so that even if they accidentally slide to the middle larger hole, they don't fall off. This would not be a problem if you adapted it to a 1/4" screw though, as the head becomes too big to fit through the insert hole. The top has a siilicone/rubber grip. I used this on my 100-400mm lens. It is long enough to adjust the balance, and there are 2 safety screws that you can unscrew in case they get in the way. The plate itself is milled well, and I am very sure it has more than enough strength to hold a big lens.

My shoulder rig requires Arca Swiss plate that's little flat. This works perfectly. Also provide two knob(screw) in front to prevent camera rotation - must for focus pulling. Perfect for my need and highly recommend for any video recording camera.

野鳥や運動会で超望遠を使うと、構図より先に気になるのが“重さとバランス”。長時間構えていると腕より先に心が折れそうになることもありました。そこでこのレンズプレートを導入。三脚座に装着してみると、重心が安定し、構えたときの安心感が一段上がりました。600mm側でも落ち着いて追える感覚があります。 ◎良いところ ・アルカスイス互換で着脱がスムーズ ・前後にスライドでき、細かい重心調整が可能 ・金属製で剛性感があり安心 ・滑り止めラバー付きでフィット感良好 ・ネジが2本あり固定がしっかり ・縦位置撮影時も安定 ・作りが丁寧で所有欲も満たされる ・価格が比較的手に取りやすい ・長時間撮影での疲労感が軽減 △気になるところ ・やや厚さがあるのでバッグ内では存在感あり 超望遠で野鳥や飛行機、スポーツを撮る方、三脚・一脚を多用する方には特におすすめ。レンズの実力を支える“縁の下の力持ち”です💪

ottima soluzione per usare un supertele sul cavalletto . Purtroppo Nikon non recepisce le nostre lamentele e continua a lasciare il piedino della lente liscio .

Precies wat ik nodig had.

Amazing craftsmanship and a really nice piece of kit

Lässt sich gut am Nikon Z 180-600 befestigen und wirkt sehr stabil. Alle Schrauben (inkl. Reduzierschraube) sind dabei.