BendixFleet Metlok MKD2174FM Rear Brake Pads for Escalade,ESV,LYRIQ,Cheyenne,Colorado,Silverado 1500,LTD,Suburban,Tahoe,GMC Canyon,Hummer EV Pickup,Sierra,Sierra 1500,Ltd,Yukon,XL,Rivian R1S,R1T

Really good pad, good bite cold, if you use them front and rear they offer very good balance. Fade free even when towing without trailer brakes. Not hard on rotors, no noise. Been using Bendix for 50 years - still a solid brand. 5 out of 5.

Ordered and installed for 2014 Ram Promaster 1500 front (regular not heavy duty).Perfect everything! Well...it could have come with (4) little zip ties to fasten the sensor wire...but I will still say perfect because I am so happy with the main components...and I have 100's of zip ties handy : )Perfect/correct pads with the integrated low pad sensor + wire (which fit perfectly in the original connector) on the inside pad (non piston side).Perfect abutment clips (the metal pieces on which the pads slide).Perfect (handy) grease packet to lube the abutment clips (and back of pads if you actually think it is necessary...with this pad set and the insulated shims it is definitely not necessary to lube the backs of the pads to keep from squeaking...but do as you see fit).If you have done enough brakes through the years like me...you know that sometimes the abutment clips are a little "off" from the originals and/or the pad ends that slide on the clips need to be ground smooth because they have a bump or imperfection that keeps them from physically fitting in place or from functioning properly. The pads I received were a perfect fit. No grinding or sanding needed.If you are competent enough to use a torque wrench, jack up your vehicle, place jack stands/employ emergency stops on your lift, and remove your wheels then you should be able to change your brake pads in about 15 minutes per side. You need a torque wrench to torque bolts/pins to manufacturers specifications.If you argue something similar to "I just crank it 'till it feels tight and have never had a problem in XX years" then you are NOT competent to install new pads (or ever work on a vehicle).If you want very detailed step by step instructions how I did it on my Promaster just ask. I keep instructions for myself so next time I change pads the setup and process are nice and quick!Pads on for about 3 weeks now and working great. I noticed that after a week or so it takes less pressure when applying the brakes now compared to when I first installed and "bedded" them.

Good quality product at a good price

The break with this Bendix are very good. They stop the car immediately. You feel the car is in control all the time but it’s dirty. I haven’t used brake pads so dirty. I’m cleaning the wheels every weekend because of how much dust this Bendix will put on the wheels, not happy with that😒

they work great, quiet and good stopping power. installed nicely.

These are nice! Good value and get me stopped out on the mail route!Who could ask for more?Easy to install...quiet after the break in period...and last a good long time.They don't seem to tear up the rotors, either.I wish I didn't know how to change brake pads as well as I do...all these mailboxes...day after day...wear them out in 6 months or so.These last a while.Good pads.

perfect fit

Not recommended , this pad on my lincoln mkt generate too much brake dust. Previous pads wasnt like that. I contact Manufacturer and Customer service promise me call me back but never happen , never ever gonna buy their product again