Tool DailyPressure Washer Foam Cannon for Car Wash, Snow Foam Lance, Additional Orifice Nozzle 1.1mm, 1/4 Inch

I have been using this foam cannon a little over 2 years now. I bought it when I bought my car. It works very well. Tons of foam, and works great with my GreenWorks 2100 PSI Pressure Washer. Still going strong with no issues. Make sure you use a quality washing detergent.

I purchased this with skepticism. I wasn't really sure what to expect. It did come with everything that you are going to need. The first thing I did was change the orifice from 1.5 to 1.1 which will make a big difference on how thick the foam is. Also I have found that you are going to want to use a quality soap. Otherwise it's going to look like soapy water and bucket. As for the nozzle adjust, it work great. Nice even pattern at the widest setting. I don't know if it makes a difference on what type of pressure washer that you are using. My pressure washer is gas and putting out about 3800psi. I do have another gas pressure washer that is 3200psi which I have not used it on yet. For me this was a very good purchase.

Overall, this is a decent foam cannon. It works well with my 1800psi electric pressure washer.I picked this version for a few specific reasons and they all worked out. I wanted the large base so it wouldn’t tip over, which is valuable compared to my old narrow bottom rounded version. I also liked the opaque bottle so I could write on it to remind me the correct amount of soap.Things that don’t quite work well:The bottle has marks for measuring but they are meaningless. I had to measure 500ml and 1000ml and mark the bottle.The shape of the bottle, especially when wet and soapy, makes it hard to hold onto. I’ve had it slip out of my grip.The filter at the end of the pickup tube is nice, but it’s not a weight and it seems the pickup tube is always away from the low point of the bottle. Makes using the last little bit difficult. Not the worst issue, but just be aware.All this said, it’s a good price point and it makes foam. I calculate panel impact ratio for product, and measure soap to the ml. This probably makes me on the edge of a typical user….which makes my comments probably more critical than average. I’ve also never used a $100+ foam canon with an expensive high flow pressure washer, so I don’t know how this compares to that experience. I’ve only ever used $30 foam canons with 1800 1.5gpm pressure washers.

I recently purchased the Tool Daily Pressure Washer Foam Cannon for my car wash routine, and I couldn't be happier with the results! This foam cannon has completely elevated my car washing experience. The foam it produces is thick and luxurious, clinging effortlessly to the surface of my car and effectively lifting away dirt and grime without any need for harsh scrubbing.One of the standout features of this foam cannon is the additional orifice nozzle, which allows for a customized foam density to suit different cleaning needs. The 1.1mm orifice nozzle provided a perfect balance of foam thickness for my car, leaving it gleaming after each wash.I was also impressed by the build quality of the foam cannon. It feels sturdy and well-made, able to withstand the rigors of regular use without any signs of wear or deterioration.Using this foam cannon has truly made car washing a breeze. Not only does it save me time and effort, but it also delivers professional-level results that make my car look like it just rolled off the showroom floor. I would highly recommend the Tool Daily Pressure Washer Foam Cannon to anyone looking to take their car washing game to the next level!

Produce great foam and easy to use

Update 4-12-19: Still enjoying the foam cannon. My one complaint is that the capacity isn't as claimed. I measured it and could only fit 52 oz, which is 1.5L, not the 2L claimed all over the post. I've contacted the seller to see what they say. There is even a question that's listed above the reviews asking about the capacity. It doesn't affect the function, just seems weird why the volume is so much less than advertised. I'll update if the seller says anything different, but still a 5 star foam cannon.Original Post: Ordered this foam cannon after seeing a bunch of youtube videos claiming the need for the 1.1mm orifice for their foam gun. Since this included both the 1.25mm and 1.1mm, I figured I'd be set for any pressure washer.I picked up this along with a SunJoe SPX3000 (2030 psi, 1.76 GPM). Together, they are a great combo. I'm sure a gas pressure washer would put out more foam, but this put out a generous amount with about 4 oz soap in the bottle. Changing the orifice required a 16mm wrench (odd size, but I did have it). I'm sure there's a US equivalent sized wrench that would work as well. I filled the bottle full and used most of it per car I washed (we did 2 today). I was being very generous and spraying everywhere for fun, so I'm sure the bottle could last 2 mid sized cars if you wanted to save on soap.Overall, great product. Adjustments are easy and cleanup was simple. Just make sure you've got a half way decent pressure washer to pair with any foam cannon, otherwise, you may be a bit disappointed. This almost eliminates the need for a soap wash bucket since there was so much soap on the car (a rinse bucket would suffice for me). Great price and I'd recommend!

It’s a great tool if you have a pressure washer, especially for the price! The main problem was my fault not knowing I needed a pressure washer. Great job to the company for the easy setup and use!