Stand Steady Techtonic Electric Standing Desk Converter wIth Dual Monitor Mount, 2 Screen Support, Quiet Sit-Stand Desk with Button Control, Keyboard Tray, Ideal for Gaming & Computer Work (Black)

I waited over a year to buy a standing desk because I couldn't find one that met these criteria: fits both on a corner desk AND a rectangular desk, holds two 30 inch monitors, leaves room for a laptop. I found this desk and was skeptical. I need not have been. I love it. It is extremely sturdy and holds my two 30 inch monitors just fine. The only two critiques I would make are: 1) there is no room to adjust the viewing angles of the 30 inch monitors. This isn't a huge problem as the angle that they are forced into is just fine, I just want to re-affirm that 30" is the maximum it could hold. Anything smaller and you'll have plenty of room to adjust. 2) The brackets that mount to the monitors are slightly too big. And I do mean slightly. I had to shave a little of the plastic off my monitors to get them to fit... just a tiny bit. If the brackets were just a sliver smaller they would be fine. Other than that- this desk is perfect. I love that it is electric, and moves up and down smoothly and effortlessly. Oh- I will add a third critique. If the motor ever dies on this- it'll be a bout a 3 hour job to take everything apart, replace the motor, and put back together. Assembly took about 1.5 hours and I was moving as fast as I could. Again- this desk is WELL worth the money. UPDATE - Still love this desk. Just wanted to add that This desk was able to fit 2 32" curved monitors. It's an EXTREMELY tight fit and there isn't any room to adjust them and they droop forward a little, but that's fine because I have them way up high and put my laptop on the top shelf for an amazing experience.

I purchased the 2 monitor standing desk for my work station. My monitors are 27 inches each. I am very satisfied with my purchase. Product is very sturdy. You can tell that it is back heavy which is a good thing for a freestanding product. Installation took me four hours. I may be a bit slower than others. Instructions was easy to follow at first, then the further you get the more it gets confusing. Some instructions were not mentioned on step 7. On top of it, I was getting confused on which screws attached with what part. I was supposed to use “A” screws for the back of the monitor but ended up using “G” (if I’m not mistaken) so switching out the screws took me some time. Another issue I noticed is that they on provided two Allen wrenches. The hex for “A” screws for the back of the monitors were not provided. I had asked my colleague to assist me on this. He used the pliers to drive the screws forward. The wrench you will need is much smaller than the ones provided. Lastly the desk seems to rock a bit but it does not bother me too much. We tried putting the stand of the base all the way to its lowest setting so that there’s not much wobbling. It helped a bit but didn’t disappear entirely. Love that the electric motor does not make annoying noise. It’s very quiet when you are raising and lowering the desk. Overall, I’m satisfied with my purchase. I recommend buying if you do not want to screw anything to your current desk. I’ve been getting a lot of compliments from my colleagues about this desk because it’s so convenient to move up and down and has a very spacious counters.

Just completed assembly and set up of my 3 monitor Stand Steady (SS). Want to share my experience regarding delivery, assembly and quality of the product. To begin, I want to thank Stand Steady for their very fast responses to emailed questions and for assistance with the issues I experienced. In the end, my challenges with assembling the unit were non-issues. 1) Lower shelf screws: After full assembly, the motor calibration ensures that the lower shelf screws do not contact my desktop. 2) Center VESA mount: This was user error (me) because I failed to notice that the 3 monitor unit is only rated for 19 inch monitors. Mine are 21 inches. So my ordeal was self-induced. Delivery - Product was sent by US Mail. The post office knowingly did not deliver my package to my door. Instead (likely because the unit comes in one 70lb box .. heavy), the postal worker (who I saw thru my office window) merely put a note in my mailbox stating that the box was too big for my mailbox. So I drove to the post office and picked it up. Upon opening the box, I was pleased by how very well packed all the items were. No damage, so points to SS. However @SS, please co-ordinate with USPS to ensure the box is delivered to the door or to communicate buyers that it should be picked up. Assembly - All parts were in the box. 2 of the parts had defects. Minor: The lower shelf mounting brackets did not have recessed holes so the screws jut out and caused concern about scratching the desk. After full assembly, the concern abated because the lift motor seems to be calibrated to stop 1/4in above the desk so no scratching. For me, this is ok but the motor calibration may differ for others. Major: The center monitor bracket VESA mount was left misaligned by 1/2 inch (ie. A LOT). From a close look, the design specification did not consider that when the metal is stamped and folded the VESA mount hole would be left-shifted versus the center of the motor riser. The misalignment made it impossible to properly install my left monitor (I have 3 21" units). To compensate, I did the following: removed the center mount, cut off the small L-shaped tongue used to secure it to the riser with a screw, cut off half of the 2 riser 'shoes' the mount slides into and drilled 2 holes (for zip ties) into the metal backing on either side of the mount. I re-assembled the hacked mount and secured it to the motor riser with zip ties (since I had to cut off the screw tongue). Doing all this took nearly 2 hours, and earned me a reduction of the misalignment to 3/16 inch (still bad but allowed me to install my left monitor). After installing the monitors, they slumped down badly. The fix (this step is NOT in the assembly instructions and should be) was to: remove the monitors, remove the black center caps on the VESA mounts, tighten the VESA mount lock nuts, re-install the monitors. Quality - Notwithstanding the challenges, I still rate this a VERY good product and am glad I purchased it. My biggest concern was that the monitor arms or the shelves would not be strong enough. Boy was I pleased to discover that they are super strong! The monitor arms hold my heavy-ish old school DELLs with ease. I accidentally left a pencil holder under the left side of the upper shelf when lowering the unit. The motor rested the shelf on the pencil holder leaving me puzzled about why it didn't come down all the way, leaving the unit un-level. I finally realized--after checking--that the full weight of the assembly (plus monitors, approx 100lbs) was being supported by the left side of the upper shelf! NOW THAT'S STRONG! And the lower shelf is made of the same super strong material so is equally strong! This understanding of how strong the unit was made me more forgiving of the center VESA mount issue (which @SS, PLEASE FIX). Had the unit not be satisfactorily strong, my fallback purchase was a $1,000 Winston unit. As such, I'm overrall quite happy that I purchased this rock tough unit at a sub $400 price. So, in closing, the Stand Steady Techtonic Electric is a VERY good product on a bang-for-the-buck basis. I'm 6ft tall and it rises and lowers to very comfortable ergonomic positions for me. Due to the higher price of similar units, I would buy it again. OCO

This product is the only one I could find that worked with 3 monitors. It is a tight squeeze with my Dell 24" monitors, but I was able to make it work. The power lift works reasonably fast and quietly and stays put where you set it along its path of travel. There is sufficient working space on the top platform to lay out several pieces of paper or a small notebook while working. It is reasonably easy to put together, but it does take some time to get it all together and set up properly. The two minor issues I had with it are: The monitor mounts are larger than the recessed opening on the back of my Dell monitors. I could have trimmed the mount points a bit to make them fit, but I decided to get some spacers and longer screws that were slightly longer than the depth of the recessed area on the back of my monitors. I found what I needed at my local hardware store for less than $10.00 The lower tray does not sit flat against your desk, I had to add some 1/4" adhesive pads to the bottom of the lower keyboard shelf to stabilize it for use while seated. This issue is not as noticeable when using this in standing position, though it does move a bit and is not rock steady when it is raised up.

I had previously ordered a different stand up desk convertor that was never delivered (damaged in shipment). I then re-ordered that same product as well as ordered this product. This product came first. I am very happy with everything about this stand up desk convertor and especially the spacious workspace/desk top space. The electric motor is really nice - very quiet, smooth and moves up and down quickly and steadily. Product is very sturdy. It is heavy; but once assembled, it is fairly easy to slide/move on your desk to where you want it. When mounting the monitors, I would recommend that you mount the center monitor first, then the two outside ones. I have three monitors mounted - two 23" and one 24". Would recommend this product.

Updating this review and leaving original notes for reference, I can modify this unit but Stand Steady advised against that because it will void warranty, Amazon referred me to Stand Steady, Stand Steady asked for videos and pictures, I sent those and they acknowledged the issues but told me I have to contact Amazon so now I'm stuck in the middle with no options other than to keep as is or return so I'm returning for refund and will continue looking for desk converter, this one is too expensive considering the wobbling and limitations of the monitor adjustment. I do not recommend this unit for purchase. Pros- This could be the perfect solution because of size and design, ample room for a keyboard, mouse and even laptop on the lower level and the vertical monitor arm with raise function makes functional sense in theory compared to other versions of these kinds of tops. Con’s - lacks stability in the lowest position (does not bottom out so there is a gap between the lower level and my desk) and the wobble gets worse as you raise the height, wobbling thoroughly affects functionality. I’m running 2 27 inch monitors and they fit but adjustability could be better, height adjustment, tilt and rotation are good but you can only do so much front to back so the monitors at further away from my face than I would like. Also finish could be better, deal arrived with some blemishes that may not come out. I’m torn because I love the size of this but the wobbling, blemishes and monitor adjustability or lack there are of are going to be a problem for me. I’m pretty handy and could probably fix most of these issues but it’s going to take time and additional expense for parts/materials. I’m considering returning rather than investing more to fix it because this one is already pricey compared to others on the market.

It took about an hour and a half to assemble which is longer than I expected. It would have been quicker, except that one of the two monitor pivots was too loose. There was nothing in the instructions about how to adjust them, but it wasn't hard to figure out. Just pop-off the plastic cover and then tighten the joint with a socket-set. Other than that issue I'm enjoying it very much. I love that the monitors rise with the platform and I was surprised at how fast it moves. When you press the button it starts off slow and then picks up speed quickly. It goes from the lowest position to the highest (and vice versa) in about 8 seconds. Just be careful not to let anything roll under the platform.

Pros: -Very tall, I'm 6'6" and this has the perfect standing height -Spacious, plenty of room for keyboard, mouse, laptop, and still some in case you need to write on anything. -Motorized, easy to move up and down. Cons: -Small monitors only -The mount on the back of the monitors does NOT lock, meaning, yes you can move your monitor any way you want, but your monitors will not stay straight. It's very loose. -Because it's motorized, it's a little noisy. It's not terrible, but just can be a little distracting for others. Overall, a really nice design, easy to use, and very comfortable. Really the only big issues I have with it is that you cannot tighten the monitor mount so that my monitors won't shift.