Question 1

Hi. :) Why is this better than the Brother labelmakers? Thank you. :)

Accepted Answer

I have 2 Brothers, and 2 Dymos. In both, I have a smaller, more common unit, links anyone could buy in Walmart, and in both I have an orange, industrial use model. The things that jump out to me, are that the labels for the Dymos are definitely cheaper, all around, but especially if you have to buy them at a store. I am going to speak only of the industrial models. The Dymo has rubber around about 50%of the unit, and on all corners. The Brother, on the other hand, has rubber around about 50%of the unit, but it only goes around the bottom half of the machine, and not around the top half of the machine, which has the large corners, as well as the cut off handle. It doesn't make sense, to be honest. Also, where there is rubber, on the bottom half, it doesn't cover the entire side, it only covers the inner half, and it is actually inset, so if the machine was dropped on the bottom half, it is unlikely that rubber is actually make contact, but the plastic would. Again, it doesn't make sense at all. All around the Dymo appears to have rubber, exactly where it should be, whereas the Brother has rubber in the spots that are least likely to make contact with a hard surface if dropped.
As for ease of use, the brother is slightly smaller, which means that it has smaller buttons. Also all of the settings have to be set through an internal menu. There is no way of setting your favorites that I know of. When selecting items in the menu, it is not always as intuitive as it should be. The keyboard is in alphabetical order (which drives me crazy!) The screen is a regular LCD, with a grey background and black letters. The one positive over the Dymo, is that the cutter handle is large, in a good spot for applying smooth and firm pressure.
The Dymo is set up to be easy in many ways. The keyboard is QWERTY, the buttons are all different sizes, with the more used ones being larger. Most of the functions are available via a button, although some buttons serve two purposes. The secondary function is accessed through use of a special shift button, that is orange to coincide with the orange color of the secondary function on the button. I find this to be one of the minor downsides of the Dymo, because this colors it's somewhat difficult to make out, especially on the darker colored keys. In fact, on the dark grey keys/buttons, they are nearly impossible to read. It surprises me because most things on this unit are well-thought-out. The screen on the Dymo is orange background with black characters, and the contrast can be easily set. In fact, it makes me think back to the brother, and I don't even know if that contrast can be adjusted, because if it a can, that feature is hidden somewhere in an internal menu. The coup de gras is that the Dymo has a large button beside the screen with a light bulb on it that can be pushed to backlight the screen, which stays on for a few moments and then turns off. Where the Dymo really sets itself apart from the Brother, is the ability to print different types of labels, all that can be accessed with a button, but who's features can be adjusted via an internal menu that often pops up automatically when a label type is selected, and is usually very intuitive easy to set. It can also print labels specifically for wires or cables, that can be wrap around the wire or cable, or to be made into a flag, with the type viewable on both sides of the flag. It has settings for Breakers boxes, modules, and even barcodes. Once you  create a label a specific way that you like, and use often, you can save it as a favorite, w/a special  button, and is then accessed via another specific button. The keys are made of several different colors, and the Dymo also has a special rechargeable lithium battery available, but it is $30. Therefore, the Dymo, in my opinion, is the superior unit. I am going to try to submit pics above, so look out for those. Thank you.

Question 2

What is the shrink ratio of the heat-shrink tape?

Accepted Answer

The half inch shrink tube can do down to a 14 gauge wire I have not tried smaller yet

Question 3

Does it print the same as the 5200?  I have a 5200 and the screen is malfunctioning but I want all my labels to look uniform.

Accepted Answer

Hi David, we are sorry to hear that your Rhino 5200 is not working. I hereby confirm Rhino 4200 prints same as Rhino 5200.

Question 4

how to print to heat shrink tube?

Accepted Answer

You can not print on regular heat shrink tubing.  You have to purchase the special" Heat-Shrink Tube" (cassette) designed for the   Demo Rhino 4200 Label Maker.

ASIN	B005MR516Y
Amazon 売れ筋ランキング	文房具・オフィス用品 - 662,549位 ( 文房具・オフィス用品の売れ筋ランキングを見る ) ラベルライター本体 - 1,182位
GTIN (Global Trade Identification Number)	00071701059598, 00071701063496
UPC	071701059598 071701063496
USB2.0ポート数	1
USBポート数	1
print_media_type	ラベル
おすすめ度	5つ星のうち4.6 1,395 レビュー
インク色	黒, イエロー
カラー	イエロー
シリーズ番号	4200
トレイ数	1
ハードウェアインターフェイス	USB
ブランド	DYMO
ブランド名	DYMO
プリンタ出力	モノクロ
プリンタ採用技術	昇華型
プロセッサ数	1
メーカー名	Dymo-CoStar Corp
モデルシリーズ	4200 シリーズ
モデル名	4200
両面印刷	いいえ
互換デバイス	プリンター
出力シート容量	1
印刷技術	昇華型
商品の用途	ラベル印刷、バーコード印刷
商品の追加説明1	ポータブル
商品の重量	1.54 ポンド
型番	1801611
接続技術	USB
最大コピー速度(モノクロ)	1 ページ/分
最大入力シート容量	4200
最大印刷速度(カラー)	1
最大印刷速度(モノクロ)	1
特徴	ポータブル
管理方法	タッチ
色	イエロー
追加のプリンタ機能	印刷のみ
通信・接続インターフェース	USB

Dymo Rhino 4200 Label Maker for Security and Pro A/V

Details

Details

Description

Specifications

Reviews

Common Questions