Womier Low Profile Key Cap - Shine Through Keycap 60 65 75 100% Keyboard Key Cap PBT Full Size Cherry Gateron MX Switch for Mechanical Keyboards, Grey/White

NuPhy Air75 v2に装着しました。 交換前はRGBライトを点灯させてもイマイチでしたが、このキーキャップに交換してから、めちゃくちゃ綺麗になりました。 なぜメーカーはデフォルトで透過キーキャップにしないのか疑問に思うほど変わりました。 商品も多少箱のつぶれ等はありましたが、商品自体は問題ありませんでした。 オススメです。

色合いが気に入って購入 最初に買ったやつにはテンキーの＋キーだけ欠品してた 急いで同じやつを購入したけど、そっちは欠品無く セールで安くなっているといえど、品質管理に難あり

グレーとホワイトの組み合わせがFlowのシルバーとベストマッチでした。 バックライトで透過するためデフォルトと比べて便利にもなっています。 ただ、アルファベットキーのフォントが個人的には好みではなかったので、結果的にはグレーの部分以外は他社製のキーキャップを組み合わせて使っています。 (これで結構満足いく構成にできたので、しばらくキーキャップ沼から脱出できそうですｗ) ※添付写真は全てこちらの商品のもので撮影しています

SAプロファイルのキーキャップを使いたくて購入しましたが、キーの中央だけ少し窪んでいるこの形状は全然自分には合いませんでした。 タイピングではとてつもなく引っ掛かり、特に小指が思ったところを押せず、ミスタイプが頻発しました。 SAプロファイルのキーキャップは他にも持っていますが、中央だけ窪みがあるこの形状は初めてだったからか、1時間ほどタイピング練習をしても全然慣れることが出来ません。 光り方はモワッとキー自体が光を透過して綺麗に見えますが、刻印はほぼ見えないと思って良いです。 そもそも自分は手元を一切見ないので光ってても刻印があっても無くても関係無いですが、見ながら打つ人には絶対向いてないと思います。 かと言って、スムーズに指が運べない形状なので自分的にはこの形状を好んで使う気持ちが理解出来ません。 キーの質感や品質が良かっただけに、SAプロファイルでこの形状なのが勿体無いと思いました。

When I got my Keychron V5, I immediately switched out the keys as I did not enjoy the stock one. I thought I was happy with Cherry profile but when in a rush I kept making typos. I then started looking into low profile keyboards but decided to take a chance on low profile keycaps to start in case I didn't like it. Since I switched to these I've been making considerably less typos and mistypes. My jittery coffee fueled fingers have no longer trip on the keys. They sound really nice paired with Keychron's silent brown pro switches. I chose this set as they are nice shine through PBT's. They feel really good and are as pleasant to the ear as they are to the eye. My only gripe is that the shine through is barely noticeable on the black keys. They show up in pictures but in person the legends are barely legible. I love the set and am going to keep it, but am looking for a similar set with black keys with solid white legends. I reached out to the seller, who responded quickly, that they do not sell individual keys as they are manufactured as a set. I'll wait for their other variations to go on sale to swap these black keys.

I have tried a few keycap sets on my TKL board that is backlit with north facing red only LEDs. A black pudding set that was okay, but had top center legends, (oh so painfully common for shine thru caps) and a bad font with gappy shine through. It was not legible without a backlight, didn't look good with it, and I didn't like the generic profile much. I did some digging and I found most cheap shine through sets had similar issues. I tried a high contrast non shine-thru retro typewriter uniform cap set with a centered full height bold font and liked it well enough, but without shine through, my backlight was wasted, and I had visibility issues in the dark. Was I doomed to deal with poor shine through legends or else let my backlight go to waste? That's when I stumbled on this set. The green highlight key options were nice and were a subtle accent to the retro computer cream letters and grey modifier keys. The legends were top center on the function row and modifiers with a bold symmetrical mixed case font and symbols side by side at the top (rather than above/below) for good north facing shine-through and the letter keys were blessedly and properly top left. The cream/grey color scheme, oem profile with sharp index bars for F&J, and top left bold font, seemed properly retro in look and feel, and I hoped would work well on my cheap keeb. I was not disappointed. There are some minor gaps in the shine-thru here and there, but the font is bold and clear, and guess what... it's usable without the backlight in daytime conditions! The shine through material actually contrasts as the darker color on these light colored keys, (even the grey and green) making the legend visible with the backlight off. With it on, the oem key height allows for minimal glow around the keys ensuring the legend contrasts well. I actually turn down the backlight in dark conditions by about a third because the thin transmissive layer and bold top left font let alot of light through. These caps are legible and comfortable to use in all lighting conditions, and work epecially well on a north face backlit keeb. The PBT feels nice but is not super thick with a columnar stem and a 'ribbed' cross reinforcement to the bottom and sides of the thin transmissive layer inside the tall keys for a low frequency hollow 'clack' (a clawk?) sound that adds to the retro feel without being too loud. I finally found my happy middle ground of nice coloured retro feeling shine through caps that are legible and pleasant in multiple lighting conditions.

I initially was worried about the quality of these keycaps, though was thoroughly impressed by the packaging and inclusion of well beyond a full size layout. Furthermore, a second color variation of keycaps were included in the original set. The keycaps sound nice and chunky on my drunkdeer a75, as well as fitting the aesthetic white build. The translucent window in the keycaps for the characters was surprising to see on such a budget keycap set. I can confidently recommend these keycaps as they are budget friendly while retaining qualities of higher end keycaps.

Teclas de excelente calidad. Dan un sonido mas "thocky" lo cual funciona de maravilla para teclados de aluminio, como el Lofree Flow 2 84 que yo tengo. El brillo de la luz a través de las teclas es muy limpio. Excelente producto a un muy buen precio.

Conforme à l'illustration détaillée sur la photo.