Injection Repair Adhesive 10.5 oz. Tube for Loose & Hollow Tile, Marble, Stone & Wood Floors. *for Best Results Use The Proven Power of a Caulk Gun*

I was skeptical buying this because of some of the negative reviews. However, it worked extremely well. I had some “crunchy” and squeaky tiles in the kitchen. I used this, let it dry, and the tiles are now firmly in place. No noise. Try to make the smallest hole possible at the tip. The product is very liquidy and if you make too large of a hole, it will just come pouring out everywhere. A little bit of pressure goes a long way with the caulking gun. I would even recommend removing the product and putting it in a syringe with a needle if you have access to that. Cleanup was easy with a damp sponge. In hindsight, I would mix some grout powder with the glue towards the end, just to skip having to regrout the holes later. I’ll buy again if I have more tile issues. I think it worked great.

Repaired tile appears to be solid. Tip of applicator did not fit in 1/8” grout and required a syringe to actually apply the product

This stuff saved us lots of time and heartache. When we bought our house the former owner had installed tile floor in the kitchen/dining and living rooms. After about 6 months we noticed the grout was coming up all over mostly in high traffic areas. We also noticed quite a few broken tiles and then tiles that came up completely. At first we tried removing all the old adhesive and re adhering the tiles but that was very labor intensive. I stumbled upon tile rescue and immediately purchased some. What a time saver and it worked great, couldnt be happier.

Does a great job. Solved my problem completely.

Been planning to repair several tiles when my family was on a trip so less traffic. I drilled the holes the snipped the tip off the tube and it started squirting. The tube was not even in the caulk gun yet. I tried to inject but couldn't get iy in the holes because it was so liquid and just kept leaking everywhere. I ended up wasting 90% more than what I think I got in the floor. Going to have to order a new product and try again.

Works well you will need to put something heavy on top of the tile. Also it says dries in 24 hours, more like 48-72

Overall, it seems to work. Just don’t apply too much pressure when injecting otherwise you’ll have a mess on your hands.

I have an old bathroom replete with loose tiles. No tile man was willing to work with them, only to replace them. I happen to like the tiles and am not ready for a renovation. I used this product, though I was skeptical. I drilled or just squirted under where there were gaps, and put heavy paint cans and books everywhere to add pressure. Once all had dried, I used tile mortar instead of grout to hold all together and go for a more uniform look between tiles where grout had deteriorated. It has been a couple months and holding. No more loose tiles or rocking under my feet. Worth it. Easy to use. Try it. Even if it holds only for a few months or a year, it certainly makes walking on my floor more pleasant. I would buy again.