Brush Wall Plate Deco Bristle Insert with Single Gang Mounting Bracket for Low Voltage Cable Pass Through HDTV HDMI Home Theater Networking Wires (White)

I was a bit concerned with some of the negative reviews on this product, with comments that the screws were missing or did not fit. My experience was very positive. I used 2 of them to get 2 cables (HDMI and Ethernet) from one room to an adjacent room. All parts were included in the package. It includes a template which has a sticker on it - you stick the template on the wall in the location where you want to install the outlet (locate the studs before you do that), and you draw around the template with a pencil. You then use a saw (I have an oscillating tool) to cut and remove the drywall. You insert the black mounting bracket and secure it in place with 2 screws -- do not over-tighten as you might break the plastic. The decorative plate is attached to the brush part, so you first remove the 2 small screws on the decorative plate to separate it from the brush part. There are 2 longer screws in the package. You use them to attach the brush part to the mounting bracket. If you are a perfectionist, you can use a level to make sure the brush part is vertical. You then re-attach the decorative plate to the brush part with the 2 small screws. Installation was really a breeze and the fit looks secure. Do not over-tighten any screw as you may break something, but that is true of any item like this. The price is a bit high for something like this, but it was still 30% cheaper than what I could find at my Home Improvement Store. I highly recommend this product.

I had a contractor installed the wall plates for my wall mounted flat screen almost 2 yrs ago. It was done (according to them) using behind the wall HDMI cable, then separate HDMI cables to connect the TV and Receivers. Well, recently picture quality issues and to the point where it just went black !!Well, it turned out to be the poor contacts of HDMI wall plates. To solve this problem I bought a good quality 20' HDMI cable to connect receiver directly yo TV by running/hiding it behind the wall.When installing this mounting bracket and brush wall plate, I can see how badly the contractor did his work (untidy and left lots of dry wall dust over the exposed part of the old HDMI connector wall plate. Worse, it was loosely screwed directly to dry wall.It is no more the problem. Mounting bracket makes sure all is firmly clamped to the dry wall. The opening allows me to vacuum all the dry wall dust out. The brush face plate can be screwed firmly to the the wall mount bracket. . . . All went perfectly well for me.

I was considering purchasing expensive plates that had 2 HDMI cables and a usb cable. This setup was going to require 3 cables per jack in order to keep wires from being seen on the wall of our entertainment center. Then I found this pair of wall plates with brushes that allows me to only use a single long cable for each connection. I can also place additional cables besides 2 hdmi and 1 usb for my setup. To install I cut 2 small 1 inch by 2 inch rectangles into my drywall and used the included anchors for the screws to fasten the plate to the wall. This makes our wall look so clean with no wires from the tv to the cabinet.

Nothing much to say here other than this is as good as stuff you'd pay twice the price for. It's always hit and miss with these "cheap knock offs" but I figured this was going to be behind a wall mounted flat screen, so if it looked a little janky it wouldn't matter. You can't tel large difference between this and the brand name stuff I bought. Two of these with the low voltage bracket mounts included were cheaper than a single face plate at a big box store. Can't argue with that.

This was extremely easy to install. The pictures here on the product information show you exactly how to do it. Anybody saying screws don't fit or holes are out of sync are either not doing it properly or have not been sent the correct product. If I can put this in anybody can.

Works great. A "10-minute job" that actually took less than 10 minutes.Strong/stiff bristles. Great if have more than one connection to pass through a wall.Much cheaper than the big box stores, and you get two!

Was pleasantly surprised when these were received. Build quality seems good, the cutout template was appreciated, and they were super quick to install.

These are easy to use, and they even include a template for the cut out.

The mounts work fine and are easy to install, however the plates that come with these mounts don't fit over the mounts once you put the centre piece in. It doesn't fit flush and the holes don't line up. Funnily enough, going to Home Depot and just buying standard wall plates fit perfectly, so I'm left to assume it's the interiors of the plates that don't provide enough space.

Easiest way to route multiple cables through a wall

Larger power cords don't fit, opening is too small, look nice though.

Passe fils pour téléviseurs

Great product, easy to install.