Programmable Wireless RF Room Thermostat Volt Free

This thermostat serves the purpose but is let down by having poor wiring terminal connections. They have very little depth which makes it quite difficult to secure the wires firmly and safely particularly when using a multi strand flexible cable. Also the L and N terminals are close together so it is essential that there is no uninsulated wire showing after connecting the power cable.The Instruction Manual leaves many questions unanswered eg it refers to "jumpers" but doesn't tell you where they are and which configuration they are preset at by the manufacturer. Also there is no specification for hysteresis i.e. the temperature at which the stat cuts off in relation to the set point temperature - it is in fact 0.5 degrees and similarly it will cut in again when the temperature falls to 0.5 degrees below the set point temperature.There is no facility for ignoring a programme setting i.e. if you need only one "on" and one "off" setting each day you have to enter the "on" time for five of the available six settings and then enter the "off" time for the sixth setting. If you need the same switching pattern for all seven days of the week you have to repeat this procedure eighteen times!The manual tells you to look for a symbol indicating that the stat has switched on - I can't reproduce the symbol on my keyboard but for illustration assume it is A/B. In fact you are looking for EITHER A or B depending whether you are using the stat to control heating or a cooling device. There is no mention of the indicator lights on the receiver but you soon discover that one indicates "power on" and the other indicates that the "heating" (or cooler) is switched on.Finally, six screws are provided separately - four of one size and two longer ones. As there are two "boxes" to be fixed to the wall, one each for transmitter and receiver, one assumes that the four matching screws are for this purpose and that the two longer ones are for securing the receiver to its box WRONG! The receiver is secured to its box with two of the short screws which means that you choose which size screws you use to fix which box to the wall - I mention this because if you try using the long screws to secure the receiver to its box you will have the devil of a job getting them out again!The staff answering the helpline are very helpful and friendly and provide first class service.

Does the job but the instructions were basic and not very clear. We had to phone the manufacturer twice to get the thermostat set up and it's a pain having to go through all the programmes (six for Monday to Friday, six for Saturday and six for Sunday) to adjust the temperature or times for just one pogramme

Item received did not operate correctly and, after telephone conversation with supplier, a replacement was sent. The replacement operates as expected and is easy to set up and use. The information sent out with the product is poor but the supplier was very helpful in solving the problem with the original item. One gripe, I had to pay the return postage for an unserviceable product!

it worked and was easy to replaceThe instruction booklet was very small font

Good control. Reciver bulky and screen and buttons small on disply unit

The power unit was glued together making it impossible to mount. Appart from that it works ok. Oh another few words to go. oops gone over now.

I brought this thermostat with the intention of helping keep the house warm it won't very well can't complain about it

It is easy to fit but programmable part works one day but the next is coming on and off when it wants very poor buy