goCoax MoCA 2.5 Adapter with 2.5GbE Ethernet Port. MoCA 2.5. 1x 2.5GbE Port. Provide 2.5Gbps Bandwidth with existing coaxial Cables. White(Single, MA2500D)

Living in Edwardian terraced house built in 1900, getting ethernet up to the loft conversion was out of the question. Despite lacking the foresight to have ethernet installed during a rewire in 2018... we did have lots of multiple coax aerial connections installed in every room (that have never once been used, thanks netflix....) Fortunately for me these all terminate at a splitter in the loft. I could not get a link to establish when including the splitter (presumably it is not the correct standard) but disconnecting the various feeds and testing them individually to bypass it... I eventually got a green light. That was a few weeks ago, and I have not had to do anything since. They really just work. Our FTTP connection is gigabit so I cannot verify the 2.5Gbps claim.... but can confirm they deliver the full gigabit speeds whilst introducing a negligible 1-2ms additional latency in comparison to being connected directly to the router. My results are still <10ms where it matters, so virtually impossible to notice. PROS: - They deliver results comparable to ethernet - Come with everything you need in the box (including a UK power adapter which is rare for these devices) - So far require little to no maintenance - Quite small and easy to hide including holes for wall mounting Cons - Could be considered expensive when compared to more commonplace alternatives such as powerline adapters, but the results MocA delivers are far superior in my application - Require power (seems obvious but worth noting) If you are in a situation comparable to mine, these are a no brainer.

These work great and came with a UK plug! I tested two of these both with a direct coaxial cable between them and on my new-build home coaxial network which has a fairly typical "star" layout where cables go from each room to a central signal amplifier and aerial antenna in the loft (so quite long cable runs). In both cases I was able to max out the capacity of my hardware – 1Gbps ethernet. The tests also proved that these work well alongside the Freeview aerial signal and my preinstalled signal amplifier in the loft, which continues to work without any issues or interference. The 2.5Gbps rating is *not* full-duplex (i.e. not 2.5Gb up + 2.5Gb down concurrent) but rather dynamically shared between lanes and devices. This means that when I tested them with iperf3 in bidirectional/dual mode I could get the full 1Gbe ethernet full-duplex speeds (1Gbps download + 1Gbps upload concurrent; see first screenshot). The selling point of this model however is the 2.5Gbps capable ethernet port, so if you have network cards and/or switch capable of such speeds then you should see even more impressive performance. I only have 1Gbps ethernet devices so was not able to test that. The only downside to using these is the latency they add to the traffic: in my testing between 3ms and 4ms, but that is about the same as my Eero Pro Wifi6 extender, but my two Eero Wifi points can only do about ~400Mbps. The power consumption is about 2W per device which is incredibly efficient. Also, while not technically a fault since you know what you're getting when ordering and there are alternatives available, it is a bit annoying that these only have a single coax input and a single ethernet port each. You will need an additional coax splitter and ethernet switch to connect more devices. For this reason I will probably replace them with the Translite MoCA 2.5 with 2 Ethernet Ports Model: TL-MC85 , but I am a bit skeptical since those are a USA model.

I've been using 1200mbps homeplugs for a while and due to my mains and interference from things like mobile phone chargers I've not gotten over 150Mbps. I recently discovered MoCA is a thing in the US and Europe; in my house I have an antenna receiving freeview in the attic which goes into an amplifier, then into four lines - two feeding the bedrooms, one to the kitchen and one to a split box in the living room. As Freeview works in the ~850MHz band, and these things work in the 850-1500ish band, the two coexist really well. I connected one to the living room split box, feeding it from the LAN connection on my router. I put a second into the room that serves as my home office and the two immediately connected. A little configuration later for enabling encryption and they're both fast and secure. iperf3 only registered 350Mbps, but actual file transfers in-house hit around 950Mbps. They're a bit pricey for two units, but if you have antenna wiring in your house and have poor success with powerline and wifi this is going to be the solution to your problems - up to 2.5Gbps. One caveat - if your cabling is feeding satellite and not a freeview antenna, there will be a signal clash and they probably will not work. For my use case, they worked out wonderfully. Thank you for coming to my TED talk.

I have relatively new Wifi 7 mesh routers, which are amazing on the same floor, but lose about half their bandwidth through the ceiling. It's still more than fast enough for most of our uses, but I figured a wired backhaul over Moca would be a fun project, benefit some of our gaming devices, and add a little redundancy to the home network. My home is wired for unused coaxial, but not ethernet. Took a bit of a chance, as the coaxial cables were raw, so wasn't exactly sure what connected to what from the junction box. Added ftype wall panels where available, and crimped the junction box cables and added ftype headers. Bit of trial and error matching the right cables, but once I did, boom - the two Moca devices connected instantly. Now my living room devices are basically hardwired to the ONT via a mesh network with wired backhaul over Moca. If the Moca ever fails, the mesh wireless backhaul takes over automatically, and while our wireless backhaul is still fast enough that none of my family would probably notice, it's nice to be able to max out our fibre broadband speed anywhere in the home.

so, i bought some of these, they didn't work, but then i found out with some reading that the signal amplifier that all my coax cables are connected to from the tv aerial - that device pretty much blocks moca signals. so i ended up figuring out which cable went to which room, i did this using the moca devices, so i plugged one in at e.g. the lounge where the main internet router is, then went to the attic and plugged each cable one by one into the 2nd moca device and saw which one got a signal. I then did the same thing again but for the target room and voila, connected those 2 cables directly, bypassed the signal booster, went into the user interface console to see what connection rate i was getting and it showed 3,400mbps, more than enough for gigabit internet. so now i can wire the backhaul on my mesh system to get full speeds at the satelites. so impressed, i'll buy a few more to hook up a few more rooms directly - namely my son who games a lot. what an amazing invention, using the existing cabling in the house vs having to get a professional install for ethernet tearing up the floors and walls or putting the cabling outside the house - no thank you.

I have these installed in a rental property as I cant run cable between floors, however someone did at some point, install Coax cable into every room in the house on the same ring which is great! As such I chose to use these to get wired connectivity between floors and, for the most part they work well. Firmware has been updated to the latest and I've been running them for 3 months now, and they are great.. until they randomly aren't. I've not been able to find a cause of the issues but these will randomly drop out for 5 minutes at a time as if they have rebooted, but the devices don't appear to have rebooted. The MoCA just looses its sync/link even after extensive testing and tweaking of settings, and trying different coax fly leads. Of which be sure to invest in something good like WF100 cables if you want to use these. I had all sorts of issue with cheaper RG6. I don't have ANY TV's attached to the coax at the property either so it shouldn't be that. Maybe it's a bug, maybe its bad cable I cant say for sure. The firmware updates are very sporadic in nature and the web interface is basic at best, and badly documented at its worst to the point of finding the documents for another manufacturers devices that use the same default interface. Great for rentals where you need faster wired connectivity, especially if you have issues with powerline like I did (even with g.hn kit getting no more than 200Mbps at BEST), and you know that all your coax is connected together and not via boosters or anything like that.

I never knew MoCa adapters existed until I came across these. I’ve used powerline and in my house I would never get anything above 60Mbps. I was considering drilling through my walls in order to get a wired connection to my office and then I accidentally stumbled across these. After doing some research, they seem to be more of a US product as they are not popular or well known in the UK at all. My house has TV Aerial Coax ports throughout but I never use them. Now I have a use. With these I’m able to get my full 1Gbps connection in both up and down with only 3ms latency to my router. I’m yet to try the full 2.5Gbps rated bandwidth of these adapters since my router and switches are only Gigabit but I have no reason to doubt I wouldn’t get that speed internally on my network. I fully recommend these to anyone with pre-existing Coax cabling in their home. In the UK you may have to get the small cable adapter to convert it from the UK TV aerial connector to the f type connector like I did but these are very cheap.

My house was built 10 years ago without ethernet cabling but with 6 coax cables distributed around the property and converging in the loft. My broadband enters the property downstairs but my study is upstairs, and for years I've used wifi with matching Archer C7 routers upstairs and downstairs purely to provide a WDS link. It's been very fast and stable. But I would have preferred a wired link, and recently came across MoCA technology and thought I'd buy a couple of adapters to try. I bought goCoax as they are a highly visible brand, but have since read that MoCA compliance means that I could have bought cheaper MoCA devices of equal capability. My experience with these adapters is top notch. I have one at each end of a dedicated coax cable and they link at 3656 Mbps, so the published 2.5 Gbps into ethernet is entirely feasible. I can't check as my switches and NICs are 1 Gbps, but I'm happy to have capability for the future.

These are an excellent alternative to Powerline Ethernet, which works reliably only 20% of the time. MoCA works a 100% of the time. Make sure that your coax splitters are capable of more than 1GHz. 3-way splitters often have one -3dB port and two -7dB ports. -7dB works better - it's higher attenuation, but wider band. Make sure you terminate unused ports with a 75Ohm terminators. Also keep in mind that they have a slightly higher latency - I'm seeing a 4ms ping round trip time on these.

The best device for those who needs wired connection but don't want to run separate cable. Why I like it ? -Very easy to set-up, just plug in and go. -Connection quality is amazing. My home office is connected through one of these adapters and gets 980+ Mbps on a 1Gbps connection. Practically no loss for reliable work, streaming, and gaming. I have bought 4 such devices and ordered one more because I have 4 bedrooms. 4 years of working without a glitch! .

Ich nutze den goCoax MoCA 2.5 Adapter zur Netzwerk-Erweiterung über bestehende Koaxialkabel im Haus – und ich bin positiv überrascht. Wer keine neuen Netzwerkkabel verlegen kann oder will, aber trotzdem hohe Netzwerkgeschwindigkeiten sucht, findet hier die perfekte Lösung. Was mich überzeugt hat: Volle Geschwindigkeit über Coax – Ich erreiche mit zwei Adaptern problemlos 2 Gbit/s brutto (real etwa 1,8 Gbit/s netto) – deutlich mehr als bei Powerline oder WLAN. Mein Coax-Kabel sind über 30 Jahre alt. Für Streaming, Gaming oder große Dateiübertragungen absolut zuverlässig und stabil. 2,5 GbE Ethernet-Port – Endlich ein MoCA-Adapter, der auch die volle Bandbreite weitergibt. In Kombination mit einem 2,5G-Switch oder NAS kann das Heimnetzwerk damit wirklich auf ein neues Level gehoben werden. Plug & Play – Adapter anschließen, einschalten, fertig. Die Geräte finden sich automatisch, keine komplizierte Konfiguration notwendig. Ideal auch für technisch weniger versierte. Nutzung vorhandener TV-Verkabelung – Ich verwende die vorhandene Koax-Verkabelung im Haus, ursprünglich nur für Kabelfernsehen, jetzt als Highspeed-Datenleitung. Perfekt für Häuser mit mehreren Etagen oder dicken Wänden. Stabiler Dauerbetrieb – Läuft bei mir seit Wochen im 24/7-Betrieb völlig unauffällig und ohne Hitzeprobleme oder Aussetzer. So muss das sein. Tipp: Wer Kabelfernsehen oder DVB-C parallel nutzen will, sollte auf ordentliche Splitter und ggf. einen MoCA-Filter am Hausanschluss achten – dann gibt’s auch keine Störungen. Fazit: Der goCoax MoCA 2.5 Adapter ist die ideale Lösung für alle, die echtes Gigabit-Netzwerk über vorhandene Coaxkabel wollen – schnell, stabil und ohne Kabelverlegeaufwand. Der 2,5G-Ethernet-Port macht ihn zukunftssicher und hebt ihn deutlich von anderen Adaptern ab. Klare Empfehlung von mir!

Top product! De oplossing voor mijn probleem met in de muur ingebouwde coax en toch overschakeling naar fiber zonder te kappen en te breken.

Easy to upgrade and works like a charm.