Ultra Wide TV Desk Mount for up to 55 inch Screens Weighing 66 lbs, Full Motion Height Adjustable Single Television Stand, Black, STAND-V155C

I was looking for a mount for my Dell U4919DW 49" Ultrawide monitor. This class of monitor is a bit awkward to find mounts for because most single screen mounts aren't rated for this weight, and those that are are typically dual mounts. I wanted a mount that would fix the monitor at my desired height and not take up a lot of space. I didn't want an adjustable arm; in my experience those place the screen lower than I want and for a 49" screen it's not really practice to swing and move around the desk. This mount comes with a variety of hardware for mounting to different VESA mount sizes, but none of the included screws are compatible with the Dell U4919DW which has a recessed VESA mount; the mounting plate included with this mount is too large and requires using the included spacers. The included hardware has large/long bolts that won't help here, but you can pick up 4x M4 25mm Steel Pan Head Machine screws on amazon for a few dollars (eg: https://www.amazon.com/gp/product/B00F32E91G). The mount is sturdy and, despite its simple and basic construction, it looks good and has nice clean lines. Replacing the Dell monitor mount frees up 1 square foot of desk space which makes my desk feel more open again. Assembly was straightforward once I had sourced the longer M4 screws that I needed for my monitor.

Bought this desk mount for my LG Oled C3 42 inch TV to raise it from the desk. I needed a desk mount instead of an arm since I never move the TV. I just wanted to raise it higher on my desk to be better aligned with my eye level. You can of course rotate the tv and tilt it a little bit as well. The stand is simply great. Very sturdy on my raisable IKEA Uppspel desk which is made in cooperation with Asus ROG. I've attached before and after photos of my setup. It took some time to adjust the mount and I really think it's a 2 persons job. The clamps mount just fine on the IKEA Uppspel table. I even have a Philips Hue led strip in between the clamp and the table. Everything comes in the box and I used the extra plates (which are included in the box) to enlarge the tv-VESA holes to 300 x 200 to match the dimensions on the C3 42. For references I used the M6 (6mm) bolts from the package which came with the stand. Highly recommended product!

I purchased a 43" monitor for my standing desk and needed a desk mount since my desk is in the middle of the room (and I have young kids). This monitor mount is great, has option for clamping to desk (which I'm currently using) or if I ever feel its not strong enough I could go with the bolt through the desk option. I've had this mount (and monitor) for about 2ish months now and I'm not concerned with stability at all. Because I have a 43" monitor that is close to 30-35pounds the monitor will wobble slightly if I bump into the desk or raise/lower the desk. My only reason for docking a star is the screw/bolt used to secure the monitor arms to the vertical pole --- its way smaller than I would have expected compared to other monitor mounts I've used in the past. Thats my only concern and fear, that one day it will just snap in half from the weight, but time will tell.

This is a great monitor stand that is handling my large 43" 4K monitor easily. It looks great and was easy to install (comparable to other good monitor stands). The only complaint I have is that the tilt adjustment is so minor, it basically doesn't tilt. If you want something that really tilts more than 5 degrees, get a different mount.

Ordered the Vivo desk mount to clamp a 50", 45-50 pound TV to the edge of my computer desk. The TV is several inches above the desk surface and can be swiveled easily. The clamp appears substantial enough to hold well to the large overhang in the rear of the desk. If my desk did not have a pretty thick overhang I would not be comfortable hanging that much weight above it but it will not be moved around much. My only issue with the Vivo mount is the sturdiness of the VESA plate screwed to the back of the TV. When the weight of the TV was mounted on it, the plate flexed out slightly at the top. I'm not overly concerned as it appears secure but if the plate was slightly thicker it would not have that small amount of give. I purchased another mount (it) from a different company for another monitor and that one was thicker and had no flex. Directions were adequate, all parts were included and assembly was smooth with careful reading and assistance lifting the TV onto the mount. I'm satisfied with the value and the product works for me.

The mount seems to be sturdy with my 49" Samsung monitor. The monitor's mounting system is a little goofy and required some modification. Samsung includes a conical metal disk for VESA mounting, however the tiny pre-threaded holes for the disk to mount attachment didn't inspire confidence as they're super small M4 threads. I drilled out the Samsung disk mount holes to accept M5 nut, washer, and bolt combinations. Note that this VIVO mount doesn't even include screws as small as M4 so you will either have to drill them out and use your own larger nuts and bolts, or go purchase hardened M4 screws for this Samsung monitor. Be careful with these large monitors. You can't lay them flat (risk of cracking the screen) so you must hold it while attaching the mount. Make sure you have all hardware and tools handy to make this happen.

Got the delivery within 2 days wasn't sure if it would hold my 36" TV. The assembly took a bit of time which was fun and sturdiness is fantastic. Built like a tank holds the TV perfectly in place without any titling or any other issues. Delivery, Price & Functionality 10/10. Highly recommend.

Se nota que es de una muy buena manufactura, muy resistente y sin problema aguanta mi pantalla de 42"

Works well, no drilling required and holds my Sharp Aquos Monitor/TV so i can actually use my sit / stand desk properly

I installed the VIVO Ultra Wide Screen TV and Monitor Desk Mount (STAND-V101C) to free up desk space, and it has been a solid addition. The mount securely holds my 36” Monitor, providing adjustable height and tilt for optimal viewing angles. Assembly was straightforward, and the sturdy design ensures stability. However, the pole height is fixed, which places the screen closer to the desk than I prefer; an additional 2-3 inches would have been ideal. Overall, it’s a reliable mount that effectively supports larger screens, enhancing my workspace.

There are no other available desk mounts of this type so if you are through to desk mount your TV you are pretty much stuck with this choice. Still, it is the right choice! The quality is very good, the packaging comes with all the accessories you will ever need (you will need to have your own screwdriver, though). One lesson learnt: while the pictures show that only "perfect squares" VESA mounts are supported, this also support the rectangular shaped mounts, such as 200x300 and 300x400. So if your TV needs this kind of mounts, you are set with this and do not need any additional adapter/accessory.