Barrina LED Shop Lights, 40W 5500LM 5000K, 4FT Integrated Fixture, V Shape,T8 Light Tube, Daylight White, Clear Cover, High Output, LED Shop Lights for Garage Warehouse Workshop Basement (Pack of 6)

Best lights ever! So easy to install, super bright. You can plug them all together and use one outlet, and they also come with hardwire plugs, or you can just butt them together. Amazing!

Couldn't be happier. Light weight, easy to install, options to "daisy chain" lights together and control with one switch, provides interchangeable cables for direct wire or plug into an outlet. And it's like turning on the sun! Exactly what I need as I'm finishing my basement. Cool thing about these lights, they're not going to be the lights I use when that space is finished, but they're going to be very easily removed and will replace the old florescent lights in my garage. I bought the single, then a two pack, and have already recommended to a few friends.

There are a number of very similar LED shop lights on Amazon. It is always a challenge to know which have the best quality and customer support if things go wrong. We bought a box of six of these 8 foot LED shop lights for our 24 foot by 24 foot garage. We use our garage for building projects and auto repair, so the lights needed to be bright. We were prepared to buy twice as many lights if necessary. It wasn't necessary and the garage now has a bright, even light. Installation was easy. Some have complained about the clips being too weak. They are thin metal, but the lights are also very light weight, so using the four clips per light appear to be just fine. This Barrina kit comes with more accessories than many similar LED shop light kits which was very handy. Some have complained that the pigtails for permanent wiring are too short. They are pretty short, but they worked perfectly for our application. We installed 3 rows of 2 lights per row - connecting together the 2 lights in a given row. We used single gang, blue old-work boxes to power each row of lights. To make the perfect face plate, use a coax video face plate with the coax connector removed. The pigtail runs through the center hole with enough room inside to connect it to the Romex. The kit comes with 4 foot power cords that can be used to connect two lights. The cords are higher quality than what we thought that we would get based on the pictures on Amazon. We wanted two foot cords without bunching up the wire for a more clean installation look. It turns out that you can buy these mickey-mouse end type cables (so called because of the three circular connectors) on Amazon in various lengths. We used Amazon ASIN: B077GVTV9Q. Curiously, the 2 foot lengths are not currently shown as they were last week, but the 1 foot, 4 foot, 6 foot and 8 foot are listed. Search for "double end connector for T8 LED integrated LED tube". We also tried another brand of LED shop light that had "twice as many LEDs in double rows" and rated at 120W instead of 72W. We thought that they would be better because we really wanted the brightest light. Turns out that those lights do not live up to the advertising. There are twice as many LEDs, but the LEDs are smaller and the bulbs are no brighter than the Barrina bulbs. Using a Watt meter the other bulbs only drew 68 Watts. Also their color was more blue which isn't what we wanted. These Barrina lights draw exactly 72 Watts as advertised and are a really nice color - not too blue and not too red. However, we couldn't find any indication of UL listing on either brand. One of the Barrina LED lights arrived with a defective pixel. We contacted the seller and they responded amazingly fast - within an hour on the weekend. They went out of their way to make the situation right and exceeded my expectations. Very impressed. We ended up buying another box of six 8 foot lights to put in my son-in-laws woodworking shop. That is perhaps the best indication of how well these lights worked for us. Best lights. Best accessories. Best customer service. We highly recommend these lights from Barrina.

No clear instructions, but once I separated everything it was pretty easy to figure out for what I wanted to do. I wanted to hang from chains to be able to adjust light height on my adjustable shelves. The daylight they give off is perfect, and my snapdragons started to germinate on the 5th day. New record time!! I have a lot more seeds to start when the timing is right for them, but highly recommend these lights. Beats my clip to the shelf lights, which work really well, but are bulky and hard to get full lighting coverage. I will still use them when I start transplanting and move off the shelves. Seem very sturdy and didn’t need to buy very heavy chain or S hooks. I bought the set of 6 - 3 ft lights and put 2 side by side on each of my 3’ x 18” shelves. I have the lights set about 2” above my trays on this first round of germinating, but will adjust height of lighting by shortening chains or shelving. I feel they are an awesome valuable compared to local big box company. I can’t wait to fill this shelves!!

I'd probably give these lights 5 stars, but having used them for about 2 years they began to fail, one by one. It's not the end of the world considering the price point, and how easy they are to replace, I chalked it up to a wash. Pros: -Seem to be the best price point around -They are incredibly easy to install/replace -They put out some serious light. A 6 pack were more than enough to illuminate every inch of my 800 sq ft shop -They are physically durable. One was dropped from about 8 ft during installation and was no worse for wear, a few others have taken a licking from a stray 10 ft piece of lumber or raft oar and seemed just fine. -I haven't done any draw testing, but my power bill was noticeably less than when I had the 4 traditional bulbs running. Cons: -Unsure if I received a bad batch initially or what, but each unit began failing after about 2 years, one by one. The final unit failed almost 3 years on the day to when I first installed them. Again, at this price point, I chalk it up to changing a lightbulb and call it a day. -Individual diodes seem to begin failing prior to the entire unit failing, which can cause flickering for a few weeks before hand. It wasn't very noticeable, but just worth noting. Overall great lights, and again, lights that I purchased again to replace the existing set once they began failing, just thought it was worth mentioning.

Really bright lights with improved fasteners. I now have 20 of them with no issues for 2-7yrs. All are working fine. I do however recommend a dab of liquid nails on back of fasteners and be extremely careful not to strip out screws if mounting to Sheetrock.

I've had these up in my garage for a while and I'm still surprised at all the light when I flip on the switch! It's so nice to be able to see what I'm doing when I'm out there. AND you can't beat the price for what you're getting. I've told several people about them.

Good lighting and Colour

Very bright and easy to install

In a nutshell - These lights offer an affordable, powerful, easy and energy-efficient lighting solution, especially well-suited for spaces like garages, workshops, and sheds. With straightforward assembly and a high lumen output, these lights are an economical, practical choice for many indoor applications. However, there are a few minor drawbacks that you should consider. Further details.. Each light produces 5000 lumens, has a wide 270-degree angle, and consumes only 40W of power, making it a cost-effective and more durable alternative to traditional fluorescent tubes. They’re also very easy to assemble/install. The lights come with all necessary accessories, including power cords with on/off switches, hardwiring options, and connecting cables that allow for up to six lights to be linked in series. This reduces installation time and effort, making the setup process smooth and hassle-free. They also include some connections with wire splices to make a longer cord, which I did to span the width of my shed so I could link 3 lights on either side with each other. While the lights themselves are fairly sturdy, especially compared to traditional fluorescent tubes, some care should be taken to ensure you don’t bend or twist them overtly, which could break them. Feature Summary Brightness: 5000 lumens per light Power Consumption: 40W per unit Beam Angle: 270 degrees Installation Options: Hardwiring and power cord with on/off switch Connectivity: Easily link up to 6 lights in series Included Accessories: Power cords, hardwiring kits, connecting cables, small connectors, installation manual Final Thoughts Overall, the Barrina LED Shop Light is a reliable, bright, and energy-efficient option that offers excellent value for its price. Its ease of assembly and versatility make it a great choice for various indoor lighting needs. I used them to light up my large tent shed, and it now looks great - day or night, and only took me under 30 minutes to get it all setup. If you need an affordable, easy lighting solution, these LED shop lights are definitely worth considering. They also go on sale occasionally. I was able to pick up a six pack on sale for $99.99 (29% savings) which worked out to $16.67/light which is a great deal!

Éclairage des lieux de travail

I ordered two sets of these. Put one set of six up in my garage, and two strips in my laundry room. The hardwire pigtail they include isn't to Canadian electrical code, so I didn't use it. Ended up putting a single outlet box into the ceiling with two plugs to run two strips of three off the supplied plug leads. This makes them legally temporary lights in case there's ever an issue with a home inspection or whatever. The hardwire is fine, you could marrette it into a standard electrical wall box, but a proper electrician would probably take issue with that. That being said, the lights are good quality, the cables aren't copper but are easy to work with and seem fine for the use case. The lights are incredibly bright. Each strip feels like 100W equivalent or so. The light is just above the 6000k daylight spectrum, but no discernable blue. Makes waxing the car in the garage much easier to see. They've been on at least ~20 hours now over a few days. No flickering, no dead leds, almost cold to the touch. The options included to string them together are really appreciated. Appreciate also they give both a hardwire lead and a plug lead for each individual strip. The two small things I would say don't affect use or quality, but to me the screws they supply are a tad short. I know they hold next to no weight but I swapped them for proper wood screws and anchors where needed. The other thing is the metal brackets they supply feel fairly sharp on the sides. I felt like holding them to stop them spinning while screwing them in, they might slice my fingers if they spun in my hand, so ended up wearing a glove while mounting the brackets. Overall very happy with the product. I'll try and do an edit to this review in six months or a year about how they're fairing. Would buy again so far. Edit after over a year - all strips still going strong, no dead LEDs, thousands of hours on some of the strips. Super impressed, bought another box of them on next prime day in case any ever die.