MotoFab Lifts DR-3-3 in Front Leveling Lift Kit Compatible with Dodge Ram 1500 Pickup 4WD

Worked perfectly on my 2017 ram 1500 ecodiesel 4x4. Definitely a true 3 inch lift. Took a drive around the block to settle but was perfect after. Definitely needed an alignment but that was expected. Looks great and maintained the factory ride feel.I would definitely recommend at least a lock washer on the bolt head side of the hardware it comes with, otherwise when you install, you'll just spin it downward since you won't be able to keep an allen key on the bolt head.Easy install, quality metal, true 3 inch level

Definitely not easy to install. Not because of the part, but because it the nature of the work. Very time consuming project. Overall, the project went very well and produced the exact results I was looking for. Do yourself a favor and have a strut compressor nearby before starting this operation. Your truck must be aligned after this kit is installed. Your camber, caster and toe will be considerably off.

Easy to install but a word of caution replace the upper control arm with an upgraded one designed for level or lift . these control arms are known for ball joint Separation from upper control arm and this level or lift adds extra strain on an already weak part of the suspension. This is a picture of my driverside upper control arm notice the separation very slight but only had lift for less than a month any longer and it would have completely separated last picture is passenger side no separation seen so you can compare the difference.

I purchased to level my 2017 ram 4x4, decided to go with a 4” lift kit with shocks and upper control arms. But these spacers are very well made would recommend to anyone just trying to level out there Ram.

These where not as easy as the back they took 3 hours per wheel by myself and you need to rent the spring compressor from O'rielys to help get them in and out. Get help with it from a friend. Also get the alignment done the camber was way out but looks great . Fast shipping. Don't buy any other the daystar kits can't compare to this kit.

Leveled out my truck wonderfully. It was a pain to get in but was worth it. 10 out of 10 would recommend.

Product is quality and works great ! My 2015 Ram 1500 was leveled.

Vehicle: 2018 Dodge Ram 1500 Big HornFront Pre-Kit: 36.5" to Fender FlareRear : 39.5" to Fender FlareFront Post-Kit: 40.5" to Flare (See Images)Preface: I am an ASE Certified Tech, so I know my way around a vehicle.This kit clearly raised My Vehicle 4 inches rather than the " TRUE 3 inch " as advertised. This wouldn't have been an issue because I could fabricate/purchase lift blocks for the REAR. BUT, the issue is when lifting the Front greater than 3.5 inches the vehicle is no longer able to be properly aligned because the lower control arm caster bolt is FULLY MAXED.So I called the Customer Service number multiple times during their business hours and received a message saying, "They are busy assisting other customers and to leave a message". I did leave a message and once my call wasn't returned I continued to call other departments, but received the same message. Customer service is non-existent.Let it be known that the box states 100% Guaranteed Satisfaction, so if they resolve the issue with me I will partially update this review. But I will still not be happy because I had to remove the leveling kit and now I have to pay $100 to get a front end alignment to get the vehicle back to Stock/Standard and safe to drive.** I will state that the product is built with quality, but I either received the wrong Specs on the Kit or the engineers had an off day. I will be contacting Amazon.UPDATE: I was contacted finally after almost two weeks and they refunded my purchase.