eXtremeRate Replacement Thumbsticks for Steam Deck LCD, Custom Analog Stick Joysticks Repair Kit for Steam Deck OLED Console with Original Touch Sensing, Anti-Slip Texture Grip - New Hope Gray

Very nice match with the clear red steam deck shell and metallic red buttons, Soldering required IF you want the gyro to work, if you dont use the gyro like me, you can snip the cable and just pop these on top, i have found no other faults from doing this. Very close/exactly the same as OEM joysticks.

Probably fits the Steam Deck too, but I needed a replacement for the Steam Controller's thumbstick. Fits and works perfectly, though I did have to rip the capacitive touch sensor lead off (cause the controller doesn't have that, unlike the deck). The included tiny screwdriver and spudger also worked great.

This might be the 5th time I'm buying these.. I came across these before they were on Amazon. I bought 2 sets of white caps, 2 sets of orange caps, and this one set of grey caps. The work absolutely fine when they are attached, for the device and make everything really pretty. Now comes the problem. As you can see from the pictures. On all 5 occasions, when I received them the wire that is coming from the plastic housing was bent so much it's structural integrity is gone. In order to solder it to the board, you need to bend the wire back and manoeuvre it in place, on one occasion. The wire snapped before I managed to solder it. I'm not here to bash the product though.. I contacted eXtremeRate (this is all before Amazon), and they were very apologetic, sent me a pack of 10 wired sensors that go under the rubber bit on the cap (the actual coil that detects capacitive touch). I already used 4 of them, the caps are completely destroyed from me trying to pull the rubber up to replace the coils (hence why I bought these so many times). A few months ago I noticed they are on Amazon, thought if they decided to launch like that they would have fixed the problem (that I made sure I mention in my correspondence, and they even acknowledged the problem and told me they would be "speaking to the team" whatever that means) but alas, they haven't. And for the 5th time, I receive a broken and defected product, which I will mcgyver together to make work, but I know it won't last. So unless you're tech savvy enough, avoid these as they won't last longer than the original steam deck caps. They are cheap to buy again, and again and again, but aren't reliable. PS: no matter how much you wash your hands before you touch them, they tend to just go dirty regardless of colour. (The white ones might go dirty slightly faster.) So I'm conflicted between 2 stars and 3 stars. Had I just discovered them on Amazon without any prior communication, I would rather these 2 stars, but because I know they tried to rectify the problem once already (even though not good enough) I'm rating them as 3 stars.

Gegen die Originalen ausgetauscht. Zwei Kabel mussten umgelötet werden. War aber ohne Probleme.

I bought these to save time and keep my old ones as backups. I soldered them to a new tmr board and they work flawlessly.

Really easy install, and the touch function works perfectly. Installed on LED steamdeck. Just needed to add a little blue tack between the thumb stick and the stick module so that the thumb sticks had something to keep them in place when installed. I don’t know about the stock modules, but with the gulikit modules these sticks didn’t wedge on like the original sticks did, so without the blue tack or some other temporary adhesive they could potentially rattle around a bit from sliding up the module shaft. Just be aware that if you’re running second generation hall effect modules from gulikit, there’s a layer of plastic/silicone/whatever on top of the solder points, so you either need to burn through it with your soldering iron, or attempt to pull it off. I curved the wires coming off the sticks so they wouldn’t interfere with movement or get caught in the internals, so just be careful when installing the modules back into the deck.

見た目GOOD！触り心地は純正よりは良い?かな

The package includes all the necessary tools for installation, and there is a QR code linking to a video instruction. Installation was quick and simple. They work great.