Guys, please please please don't leave negative feedback if the plug doesn't fit your item. If it doesn't fit your item, please just return and maybe mention which device it didn't fit to help out other fellow shoppers. keeps shutting down my listing because of negative reviews but the reviews are not a reflection of the product, they're just from folks who don't know the size of their device's connection. Also, if you select the least expensive option that uses slower shipping and is part of 's "Small and light" program, they do not allow returns. This is 's policy, not my choice. So if you're unsure if this connector size is correct for your device and are just taking a guess, please don't use that option since you will not be able to return it if doesn't fit your item. Although this is the most commonly used connector size for general electronics, power adapters can and do come with many different connector sizes even if they share the same voltage and amperage specifications. Input: 100-240V AC Output: 6V 2A DC Connector size: 5.5mm x 2.1-2.5mm (outer x inner diameter) Polarity: Positive (center positive, outer negative) Cable length: 1 meter. Packaging type: Plain white box If you need longer reach, see my other listings for extension cables.
P**L
Power Supply works well with my BP Monitor
I needed a power supply for my Life Source Model UA-767 Plus Blood Pressure Monitor. AA batteries were giving me inaccurate BP readings occasionally. My BP Monitor was given to me by the Veterans Administration but without a power supply. Now, I can get more accurate readings at home.
W**E
No 6V 2A Identifying Markings anywhere on adapter. The area where it should be is totally black.
There was no power ratings on the power adapter, nothing to show what the output voltage & amperage is,I measured the output and verified that is was a (+) positive 6V output. The actual DC out measure +6.14V . I feel confident that it is a 6V power adapter. I will have to assume that it is @2A. I have never seen an adapter with no identifying markers. The only thing marked on it is CAUTION INDOOR USE ONLY. I used my DYMO and marked it +6V @2A (see photo)
K**R
External Flash Battery Power Supply
Powers up my old Sunpak 422D speedlight in around 4-5 seconds. Was in the habit of tinkering around with old stuff and though about converting 4 AA batteries (6v) to an ac adapter. Used (4) 1/4-20X 2.5" steel bolts as contacts and the rest is history. For less than $6, I get to use my old flash for several hours before it heats up. Originally used an old Radio Shack 6v, 300mah adapter which took more than 35 seconds to power up. With this 2 amp ac adapter, 3-5 seconds is the norm. Great improvement and a lot more fun for me.10/5/2020: Just ordered my second one. Been using it a full hour per day and it still works powering all my converted speedlights. Hope to place (2) Sunpack 422s in my 42" octagon softbox. Should get around 170GN with this cheap setup.
A**N
Just a tip
Exactly what we needed.I would like to use the remainder of my review to give a quick tip to anyone looking for a power supply but knows little about electrical,You need to match the volts so if the device says six volts get a six volt power supply,The amps can exceed, so if your device requires 2 amps it’s okay/preferable to get a power supply that is rated for higher amps for example the power supply can be rated for ten amps but the device is only pulling two amps which is fine. Just DO NOT get a power supply that is rated for lower amps than the device you are supplying power to needs.
K**E
Only worked for about a month
Stopped working after about a month. I was using this adaptor on an automatic touchless trash can and I thought that the trashcan was defective at first, but it still works great with batteries. This crappy power adapter could not even handle running a automatic trash can for a month, do not buy one of these.
G**Y
Unfortunate - it died 24 days after my return window closed.
This 6 volt power supply worked perfectly up until 24 days after my return window closed. Bummer.Instead of 6 volts DC, it now measures 2.4 millivolts. I was using it on a Bushnell Trail Cam in the back yard to see what critters were roaming around at night. And I was tired of buying batteries.This Power Supply was rated at 2 Amps - way over the current requirements of the Bushnell Trail Cam.Hey, Super Terrific Imports, can you send me a new one to replace the premature failure of this one please? I hope you stand by your product.
C**T
Dead on arrival.
Would not recommend this supply... I'm guessing its defective, or they meant it handles 0.2A, not 2A. I got it to supply power to a toy that takes 4 D batteries. The toy draws about 0.5-0.6 amps with the occasional 1.2-1.7 amp spike when the motor in it gets loaded, a 2A supply should be able to handle this easily. However, this supply couldn't even get the motor turning. The output of the supply was 5.9V at no load which implies there's something inside the wall wort loading it down, or it wasn't designed properly.
S**R
Does not work. Cannot return. Stuck with it.
Does not work in any receptacle. Bought it as a replacement for an LED poker table. Does not work. The table works when we steal an adapter from another source but not with this one. And when we use this adapter on any of the working items in our home that requires this adapter it does not work. However, this item is not eligible for returns so I’m stuck with it.
Trustpilot
1 day ago
1 month ago
