3 in 1 Foam Cutter Electric Styrofoam Cutting Tool, 100-240V / 18W Hot Knife Cutting Tool Foam with Electronic Adaptor for Small Cutting Project, DIY Craft, Foam Carving

The Foam Cutting Tool is an excellent and reliable tool for all my craft and model-making projects. It heats up quickly and cuts through foam with precision, making clean and smooth edges every time. The different attachments provided make it versatile for various shapes and detailing work. It is lightweight and easy to handle, which makes long crafting sessions comfortable. Overall, this tool has made my projects faster and more professional-looking, and I’m very happy with its performance. I would definitely recommend it to anyone working with Styrofoam or similar materials.

Cuts through foam board like butter!! I bought this because I was skirting the underneath of my motorhome. I had a lot of foam board to cut and didn’t want the mess of cutting it with a knife. Worked like a charm! No mess, clean edges. The foam board put off a strong smell while cutting, I took it outside instead of using indoors. Love that it had a little stand to sit the tool on. Would have loved it more if it was cordless.

Edit: I have added one star for customer service finally assisting in a solution. After my initial review and a couple more emails I was finally able to get a replacement. It showed up today (sooner than expected) and seems to be working great so far. I love how quick the foam cutter heats up. I really want this to be 5 stars, but the customer service has really ruined the entire experience. The longer of the two straight rod attachments has a lot of give/wiggle at the gold/brass base. The other one does not. I played around with the base trying to tighten the attachment with no luck. I had used the item the second it showed up, and after reading the return policy from the seller (etoopery), I couldn't return it anyway. Which was fine, I didn't want to return the whole kit, I just wanted the one attachment replaced. I sent an email and they said they needed a couple of days to reach out to the vendor/manufacturer and when they replied it was with a photo I couldn't open and a reply telling me that I was able to tighten that base. I had already politely explained that I had attempted the fix and it wasn't successful. I wasn't asking for a whole new device, just the one that wasn't performing on the same level as the other attachments. For the price this should not be a difficult fix. I'm concerned about this one attachment failing and they seem less than concerned with making it right. The other two pieces are great though. I actually need a second kit since I generally like this one so much, but I'll be looking for the same item from a different seller.

Looking for a tool to cut through foam quickly, easily and mess-free? This is tge product for you! After using this product for only an hour, I'm ready to give it 10 out of 5 stars. I make insulated beds for the stray cats that stay on my property out of styrofoam coolers, so they have a place to sleep and stay warm in the winter. I used to use a utility knife to cut the foam and it got the job done, but it left a mess to clean up after. Not sure why it took me so long to look into a specific tool to use for this job, but I found it with the GOCHANGE Foam Cutter. This foam cutter gets the job I need done in a fraction of the time it took to cut with a utility knife, with zero mess to clean up afterwards! You get three types of cutting tools - two thicker pen-type cutters (short and long) and a bow that uses much thinner wire as the pens, with a spool of extra wire you can use to replace as needed. Simply choose your cutter, snap it into the handle, switch the tool on, wait 10 seconds or less for the pen or wire to heat up, and start cutting. The tool heats up the styrofoam as you move the tool through it effortlessly, no small bits of foam are left behind, and the cut surface is smooth and clean. It's really that simple! The hardest part of using this tool is having a steady hand to make accurate, straight cuts, but that is not a fault of the tool at all! I really wish I would have thought to look for something like this sooner. I purchased this at retail for $30 (at the time of this writing it is 10% off), and it was well worth the price for the convenience, ease-of-use and all the parts included with the kit. Another convenient use for this product I found - if you have foam that has been cut and left a rough edge that continues to shed pieces of foam, you can use this tool to "cauterize" the area - either shave a little bit of the jagged edge off or use the tool to burn the area, and it will stop the shedding of loose pieces of foam. Another reviewer mentioned about fumes given off from the heat and I will agree that this should be used in a well-ventilated area, even wearing a face mask to prevent breathing in any fumes is a good idea. Really the only time I encountered the tool giving off any kind of fumes is when it is turned on and heats up, if there is any kind of residue left on the pen or wire from previous use. The manual says to wipe the tool off with a wet sponge after it has been turned off and cooled down to remove any blackened burnt-on foam; I found this method to be completely ineffective, as once you turn the tool off and it cools down any material burnt on the tool it will not come off easily once it has cooled. I used a dampened paper towel to quickly wipe the tool while it is still on - this was much more effective. If you are going to do this, make sure you use enough paper towel so that you will not burn your fingers, and make sure it is damp!

In July of 2020, I purchased some heavy-duty XPS foam in order to create a Harry Potter diagon alley model. Thinking that the foam wouldn't be too difficult to get through, I first tried using a box cutter and utility knife to cut out the pieces that I needed. This. Went. Horribly. After 20 - 30 minutes of decently hard labor, I was left with ugly chunks of foam that were completely unusable for my project. Not sure what to do, I purchased this foam cutter online, thinking that it would make the job slightly easier. Boy did I underestimate this thing. This is absolute magic. As soon as I touched the foam cutter to the XPS foam the foam virtually melted. The foam cutter slid through it so easily. It was easier than running a knife through room-temperature butter. It cut the styrofoam in a matter of second and left clean, defined lines. The foam chunks I cut out now look neat and professional - as I want them to. Besides the fact that this foam cutter works unbelievably well, the setup is also extremely easy. Attaching the foam cutter to the cord and then plugging it into the outlet took about 15 seconds. It was working immediately and I experienced no technical difficulties. In addition to this, the kit comes with more wire, a pen for marking foam, two electric pens, and a stand for the foam cutter. The fact that the kit comes with this makes me even more impressed. If you are thinking about getting this product, please do it. It is worth every penny, and then some. Pro-Tip: I would recommend using the foam cutter outside since it does let out a bit of smoke.

In my opinion, not worth it. I Did not like it at all. 1st took forever to heat up and just an on/off button no temperature gage. Finally waited 10-15 minutes and went to cut foam board for a Welcome sign and it was very slow moving and burned the board! I tried it twice with all the attachments and still the same thing. My exacto knife worked better and gave a cleaner cut. Too bad I missed the return window because I would like my money back!

Smaller and cheaper made than expected! But cuts well!

I bought a pair of ceramic deer from Amazon recently, but didn't want to use the styrofoam that it came in for storage. I saved some 1 inch soft foam packing material I received from a different order, layered it, traced the outline of the deer with the included blue marker and cut the shape. I used the 12cm tip. To make it easier, I mounted the tool to a board and attached it to the edge of a work table so the rod was facing upward. This allowed me to move the foam around on the table surface more precisely and perpendicularly. You could certainly do it freehand, but it would be a little trickier. I wish I had been careful to make the outline smaller than the desired cutout so that there wouldn't be any traces of blue left over on the foam. That's my fault, obviously not a negative of the product. You should move along slowly if you are using thick foam and periodically wipe of the excess melted foam goo that gathers on the tip. The smoke is nasty. I suggest using this tool in a well ventilated area and wearing respirator, or at minimum, one of those disposable masks with a carbon filter (that is... "Nuisance Level Organic Vapor Relief.") This cutter is a few dollars more than some of the others available. I decided to go with this one because the build quality seemed better. The on/off switch seems to be better than some of the other units out there. The thing heats up very quickly. Changing out the different attachments is pretty easy and feels solid. The longer 12cm could be broken off if you push it too hard, but that's just because a longer tip experiences more leverage forces. I haven't used any of the other tips yet, so I can't speak to their build quality, but they seem comparable. I'm happy with my purchase. This one is just a few dollars more than the cheapest ones out there, but I think it is a better value for the money. My ceramic deer will be well protected in the off season.

This is a wonderful and very useful tool kit in preparing various landscapes for my dioramas. It is easy to use and comes with a variety of attachments. I have purchased many products from "GOCHANCE" to my satisfaction with all products.

Bueno y funcional, al.momento. Esperó sea duradero.

Easy to use and very efficient. I cutted throught 3'' foam like it was butter. Beware of fumes, need good ventilation !

Gracias a que el alambre es muy fino, los cortes son muy limpios y precisos. Bastan 10-15 segundos para obtener la temperatura ideal para comenzar a trabajar. Los materiales se sienten firmes y resistentes. Los alambres rígidos muy útiles para hacer perforaciones. Creo que solo faltó un regulador de temperatura. Excelente relación calidad-precio.

Great tools and works well.