Rugged Ridge | Seat Cover Kit, Black/Red | 13297.53 | Fits 2011-2018 Jeep Wrangler JKU 4-Door

Overall amazing product exactly what you want for neoprene covers on a Jeep. Just like other reviews expect the shade of the color to be about 2 shades lighter than product picture (Was expecting more a Coyote Tan than desert white tan) As for installation holy F*** the other reviews aren’t lying. You’re going to need some patience and expect to get pissed.Headrest - Not to hard ~ 3 min did it while it was still on the seat then fully took off to force the Velcro underneath (it will barley catch)Top seat - First part (easy) just pull down tick side air bag cover. For the connecting flap (you are going to get frustrated as F*** it is a near impossible fit the…as soon as you get the velcro to fit it sticks to the cotton in between your seat backer. To save yourself sweaty frustration - measure the width of your seat and cut a strip of the cardboard box the seat covers come in *big enough to slide through your seat 4 inches both ways. (This will prevent the Velcro from catching inbetween your seat) it’s still a super beyond tight fit but just takes jimming. To expedite it more I took 550 cord and girth hitched both corners of the Velcro pushed the cord threw first then just pulled it from the back. (Wish I woulda don’t that from the start made the second seat only 5min to install after 45min on the drivers seat)Bottom portion- If you use the above cardboard/ 550 cord method it’s easy. If not good luck getting angry with the impossible fort inbetween the seats for the buckles.Endstate - Great product worth the money and time (just like anything with a Jeep your just going to get angry until it’s done)

I would give this a 5 star review except for two small issues. Number one is the velcro on the headrests, it is to short. It is possible to attach the two halves together but it is so tight it distorts the cover somewhat. I sandwiched 2 inches of added velcro with the attached velcro to extend it, works fine. Number two is the poor instructions. Both of these are small issues and don't detract from the quality and fit of the covers which deserves 4 stars but really how much does 2 extra inches of velcro cost?Now my real reason for this review. Getting the bottom of the back seat cover between the back and bottom of the seat is tough, that is one thing the instructions do point out. The real problem isn't the tight gap it is the fact the velcro on the seat back cover sticks to the seat fabric. I slid a plastic trash bag between the seat back and seat bottom first then pushed the cover through on top of the bag, that way the velcro could not stick to the fabric of the seat bottom. Slid through with little problem then.Still it takes about 30 minutes per seat, have not tackled the back seat yet but it looks easier. The fit is great, the covers comfortable and to me makes an already nice seat even better. Can't say anything about the durability since I just put them on but I'm hoping for the best. I always wear out the outside edge of the seat bottom and back from getting in and out and my jeans rubbing the fabric.

These seat covers are a bear to get on but once you’re done wrestling them and getting the material stretched into place they look great... took me about an hour...I think the material could be extended here and there to get slightly better coverage.And the flaps that they put in for the srs cover and the area where the back seat releases are could definitely be larger... the srs covers come out often and the back seat release covers do not stay in place at all... the head rest covers could be a little bigger... they cover the entire headrest but you can not attach the Velcro but it’s not needed in my opinion... to me this does not make a huge difference in look or functionality but at $200 they should be perfect.

I own a truck dealership and buy a lot of seat covers - for personal and work - these are hands down the best looking, most comfortable ever! Installed them in my personal, high modified Jeep Wrangler and they look fabulous. Install was a bit of a pain, took my husband and a friend about an hour but so worth it. I would buy these for every car I own!

Well to start they are nice looking seat covers for my 2012 jeep JKU 4 door sahara.But be prepared for some tough installation.I bought the front and rear coversand the fronts have a velcro that you have to slip through the upper and lower parts of the seat well the velcro will grab onto the material were the leather ends and the material starts, like glue! See my picturesI slid thick paper into the crack first and they should absolutely put this procedure in their instructions, then i was able to slide the velcro through. The hooks with elastic are on the thin side see pictures its not going to last long. Then on my jeep there is the leather flaps that hang down behind the front seats that hang to cover the lower back of the chair, well they interfere with joining the velcros together for the upper seat cover see pictures you need to fold it and bunch it up to get it to work. Makes the install kind of ugly. Then the head rest covers, why they are made so small I dont know!? head covers dont need to be that tight they are not going to move so guys come on add a 1/2 inch of material to the head rests. They actually squish my head rests down they are so tight and keep popping up, see pictures. The zipper on the backs seat just kept unzipping while i was trying to install it. I think it didnt get sewed on probably it was all zigzag on the material around the zipper. Maybe a velcro at bottom near zipper to keep it still. And finally you guys should eliminate the pocket on the backside it just hangs loose and is ugly or put more elasticity in it. see pictures when you go to lay the back seat down it snags the pocket.And lastly the airbag cover pocket thingy geez ad more material it never stays tucked in. see picture.My 2 cents.

This is my second set of seat covers for my 2017 Jeep 2 door.My first set faded after a single season and really never fit right and i spent good money on them.This set, flawless. Fits like a glove and never looses, no fading, easy to clean and looks amazing.

The covers fit nicely in our 2012 Wrangler. As the other reviews state it takes a little time to put them on but at least you know they will not slide off. We used a piece of cardboard on the seat part when trying to fish between the seat & the back to keep the Velcro from sticking to the seat which made it easier.

this product notes it fits Jeep Wranglers up to 2017 when in fact it does NOT! the flap at the bottom and back of both pieces have no where to tuck into because there is no hole between the top and bottom seat components.. so I had to fold over the covers, to make them work. NOT HAPPY.. they look sloppy

Fits perfectly. Great quality and will recommend to anyone that wants a good looking and fitting seat cover. Yes...the fit is really tight and requires some patience getting the pieces between the upper and lower seat sections, but it is worth it. Best seat covers I have ever purchased.

Nice fit....covers almost all the seat...