818MP QuietFILL® Platinum Universal Toilet Fill Valve & 2" Toilet Flapper Kit, Silver

Perfect product—saved a ton of hassle and the toilet flushes perfectly every time after installation per the included instructions!

I am not a plumber, not even close, but I was able to install this by myself within 20 minutes! This included time to remove the old parts and empty the tank. The directions were very clear! This system is not only quiet, but also seems very durable. No leaks!! Perfect seal! I would definitely order this item again.

Easy install took minutes works as it should nice and quiet would definitely buy again......

My fill value was not turning off which at first thought the float was set to high. After further inspection my float valve was the correct height but the valve was leaking . . . evidence was seeing water movement in the bowl. I replaced my fill value with this Korky and problem solved. One comment on this kit, unsure its a fault of the product, but the Flapper from being stored in the package (unsure how long) seemed to be curled. As a result it did not want to sit completely flush and caused the toilet to have a small amount of water movement in the bowl. Seeing my original Flapper was not bad I reverted back to it and all was good again. I kept the Korky Flapper and will try to use a blow dryer and put weight on it to try to get the slight curl out of it so it will sit flat. For now the original Flapper works fine. Hope this helps.

Pretty good. Flap didn't seal right so I had to swap it for an original Kohler flap. Fill valve does its job and it's nice looking and fits well. Worth the price point

Missing parts out of the box... was missing the rubber gasket on the bottom of the fill valve tube. Pretty important part. Otherwise it is a good setup but missing parts? I had to go get the part since I’d removed the old valve… check to see you parts are all there before would be my advice.

I used this to replace an existing Am Standard OEM flush valve that always has a trickle after filling the tank. My system pressure is normal - 65 psi - so that was not the issue. Maybe it was the flapper not making a good seal. Anyway, this unit fixed the problem. It is adjustable for the 1.25 gal low gallon flush tanks, and for older normal 2 gal flush tanks. Easy to install and adjust. Only took 30 min, including testing and adjusting. Be sure to leave just a little slack in the chain from the handle to the flapper. Too much and you will not get a complete flush and re-fill. Great product !

Yes, it is all made of plastic. That is why it is affordable. The good news is it is very simple to install, almost plug-n-play. Read the manual to get more details. Now, my toilet is not leaking water

After having attempting to troubleshoot my running fill valve which didn’t resolve the issue I went shopping on Amazon for a replacement and , decided on purchasing this all in one kit so that I could diy it myself. There were very good step by step instructions , I was able to easily adjust the height and, the new fill valve was installed in less than a 1/2 hour … most importantly it works perfectly thus avoiding paying for a plumber. *Totally my mistake and, I don’t know how I missed it however, just a heads up before ordering this kit is to confirm your existing flapper size as unfortunately, the one included was too small for my toilet tank. I didn’t return the kit because, it was my own mistake and, because my primary concern was replacing the fill valve and putting an end to water costs/wasted water and, this did exactly that. .

Worked like a charm! Easy isntall and good instructions.

Good quality …resolved toilet bowl performance issue..

Valve pour niveau d'eau dans réservoir de toilette

super quality