BAKBAKFlip MX4 Hard Folding Truck Bed Tonneau Cover | 448125 | Fits 2015 - 2022 Chevy/GMC Colorado/Canyon 6' 2" Bed (74")

Looks and works great

There so many options out there. And making a decision based off of reviews, YouTube videos and photos. There is a level of trust you eventually have to take! I think I made a good one!Installed this by myself on my 2020 Ford F350. Instructions were easy and good. Would recommend it to anyone in the market for a hard tonneau cover. I know it won't fully secure whatever my cargo, but it may offer some deterrence from one messing with my stuff.

This thing really makes my truck look great and I feel like my bed cargo is safe. Very little water intrusion in the car wash but it does allow water in. Beware if you have carpets

Purchased and installed both the BakFlip G2 cover and the BakBox2. It took a little over three hours to install both by myself. The BakFlip replaced a modestly priced brand x which was certified to fit but turned out to only “kinda fit”: Promptly returned brand x and bought the BakFlip. The superior quality and fit were immediately noticeable. Nice rubber seals all around the tonneau cover where it contacts the truck rails and tailgate. Looks great, and only the next car wash or hard downpour will determine its weather resistance. The only issue I had was the elevator bolts that secure the cover to the front of the rails were a tad bit short to engage the threads on the Star Knobs when the included lock washers were added. So far, it seems to be holding fine with just the rubber and steel washers. The star knobs do pull the bracket up some, so my guess is once that bracket settles into its current position, I will be able to add the lock washers as well.My Colorado replaced my aging Avalanche, which had had two large side compartments to hold bulky, dirty accessories (receiver hitch, booster cables, tied owns & buggies, and more). The Colorado only had a shallow compartment under the rear seats, which didn’t hold much. The BakBox solves this issue nicely, and if emptied, can even be flipped back completely under the BakFlip cover to make more room for large items that require more cargo space.

After I got a few quotes for a camper shell for my truck that would cost about as much as some used cars, I opted to buy a cover like this instead. I actually ordered the Gator brand FX first directly from the Gator website. I received a previous customers incomplete and busted return. So it took a while to return it and the company itself is pretty hard to work with. I’m pretty sure Bakflip and Gator are the same company, if you look at the websites they look identical. Because of the difficulty working with the company I decided to purchase from Amazon who will take any return back if you have a problem. Went with the bakflip so I could close the tailgate without opening the last panel, other than that they are pretty much identical to the Gators. I got a good new one in a nice box and it installed really easy and quick. You’re going to need a friend to hold the top of the bolt that connects the cover to the rails so you can push from underneath and tighten the star knobs. I don’t expect it to be waterproof, some water will surely leak in but the drain tubes went in really easy (zip tie the top section that connects to the rails!) and seem to work. Stick a little piece of the foam bulkhead stripping on the ends of the rail gutters at the tailgate end to keep water from dumping out that side. I don’t see why they left one side open like that. If you have a lot of pine straw and leaves then these gutters will probably need to be cleaned somewhat regularly. The whole cover could be another inch long to have better overlap at the front and tail ends but it works. If they could build in some battery powered motion lights to the underside of the panels would be really cool. I like it a lot but be careful ordering direct from the manufacture site prepare to talk with several people if you have issues.

Bought this for my 2022 F250. Installation took under 2 hours. Helps to have a second set of hands. Had it a few months now. It looks nice and it is really solid. Doesn’t bend much at all if weight is put on top of it. Locks pretty well and can be latched with the tailgate up or down. Only negative I noticed was that when I’m on the highway, the cover lifts a couple inches at the joint between the 1st and 2nd panel from the cab. There is no latch that locks the first panel in place. Not sure yet how to solve that problem.

Good buy. Easy to install. There is a 8 minute YouTube video you can watch that is done by the company

1) Delivered on time.2) All parts were there.3) Easy to follow instructions.4) Surprisingly SUPER easy install. I did it alone in about 15 minutes.5) Looks great, low clean profile that looks like it was installed at the factory.6) I only gave one star for durability simply because I’ve only had it a week. Time will tell. However, it seems solid, doesn’t feel at all like a cheaply constructed disposable product of China.7) My only criticism is with regard to the drain lines. The tubes provided should be a slightly narrower diameter to fit in the bed wall holes without having to drill them out. Also, a couple of 45 elbows tossed in to direct the drain tubes towards the bed wall would be nice. I was able to use what was provided, and it will definitely “work” but, still went to Ace hardware and bought elbows and tubing that will be a cleaner look and more functional. Again, what’s provided will definitely do the job, I’m just one to always try and “build a better mousetrap”.Overall I’m very happy with the cover and highly recommend it.

Installation is very easy. My only issue is the kit was missing some screws and inserts and the pre-drilled holes aren’t even and not cleaned up. Pieces of sharp metal sticking out. See pics.The instructions aren’t up-to-date and normally go up to 2016 so it’s a little confusing as to whether you need a spacer kit as per the manual.If the company is going to sell these for 1300 bucks, they should at least put a little more effort into the fit and finish of the product and ensuring all of the hardware is in the box. They say it’s the best on the planet so I’d hate to see what the other companies are selling.

The tonneau wasn’t too bad to install. Took maybe an hour because we had to make some adjustments in order for it to cover the entire box. The weather stripping could be made of a more durable material such as a closed foam instead of an open foam and the adhesive could be more stronger. When making the adjustment after finding the cover was a wee bit too short in the initial position the stripping did not adhere again very well. Ended up purchasing some new stuff which I hope works. Overall quite happy with the purchase and recommend the BAK brand though possibly a bit more research could go into the overall design but that might be tough to do with the different truck brands and bed dimensions to provide an exact fit.

Found this tonneau cover a great purchase although a little pricey. I had it professionally installed and was billed for 1.5 hours, so I have no comment on ease of the installation. It is a perfect fit for my 2016 Chevy Colorado short box and the hard cover appears to be very durable. It was just installed so I have no long term experience with it. I did put it through a high pressure car wash and some spray did enter but nothing that concerned me. The best feature is the ease of operation and knowing my contents in the rear are safe.At this point I am very satisfied with this purchase.

I ordered this for my 2019 Ford F350 so I could have a partial cover while towing my 5th Wheel. Perfect fit. It has rained quite a bit since purchased but my truck bed is perfectly dry. Really like the 4 panels. Highly recommend.

This was a perfect fit for my 2022 F350 shotbox. It looks amazing and appears to be very good quality.