EBESTAirbrush Holder Clamp-on Style Station Stand Kit 4+2 Mount Spray Gun Tabletop Bench Station for Airbrush 360°Rotate

This is essentially the Grex grip but without the name and it costs 25 dollars less. People, I beg you, stop paying 25 dollars for a 'legitimate' product or for the name. It is the same exact item and the material may as well be exactly the same if it's not. Both are hard plastic. The grex is not some premium rubber upgrade over this.Neither are very good as they are, but as you can see in the picture I have altered the grip and it vastly improves the feel. I will further alter it so that when I put my Grex into it one more time, it will be the last time. I will make all the edges smooth. The top part will be further cut down so I have easy access to taking the gun apart. I will also cut out some material around the nut so that it can come off and go back on easier but ONLY in the back area where the nut is at. There is no room to be hacking off the front half. That's where the fingers need to rest!So note to Grex, when they inevitably create a 2.0 of this, and I know they surely eyeball the counterfeit product unless they signed off on allowing it, ditch your design and make it closer to what I got going on here so when the brush has to dig into your palm as you grip it in a way that allows ease of pressing on the trigger, it doesn't cause discomfort and negative reviews by big handed folk. Remember it needs to be smaller on the top to allow brush disassembly for some models and again, it needs more room at the bottom for the nut to screw into place. A different material wouldn't hurt trying before you go time with the adjustments for the factory but really what I got going on is fine with the existing material.

So I saw this on another website for like $30 bucks lol then on Amazon way cheaper and I do alot of airbrush projects that are good sizes and sometimes require hours of painting so my hands cramp up and get sore real quick. That being said I saw other trigger guns from Iawata, Paasche etc that looked just like this trigger grip however I didnt want to spend $100+ for a whole new gun just for the grip comfort because all my guns work fine and I'm used to how they spray. So I discovered this lil gadget and let me say it fit good and it's not super thick and heavy but not like super cheap and easily breakable it was just in between. So I gave it a run and WOW what a difference it made better stability and gun control for one but the comfort it gave my hand was phenomenal. No more cramping wrist and fingers for me. 👍👍👍

Very surprised by the thickness of it, because of my bad hands I thought it would be flimsy and would fold up as soon as I gripped it, no, it supported me rather comfortably, the only two issues that I had was it had somewhat sharp edges and the flair tip on the bottom kind of got in the way of the clamping nut that holds the airbrush and holder in place together tightly, but nothing that sandpaper and a good blade couldn’t handle. I would recommend this to anyone who uses an airbrush.

If this had not lied it would’ve been a great improvement on a regular airbrush. However, the tube inside the handle would not seal at the top. The gasket seems to be the right size, although it was dislodged when it originally arrived. Because you can’t reach the knot at the top of the tube it is impossible to tighten it to get an airtight seal. Therefore it is immediately useless.

1st I would like to say this product is not designed very well and neither are the seams joined very well either. There are sharpe edgess on every single part that has an edge and the rear handle protrudes sharply into the palm. I wear a large/extra large mens glove and I can say that this is much too large for my hands. If you do decide to buy this do not that this only works with airbrushs with a perpendicular air valve like an Neo for Ieata airbrush and not slanted diagonally like the GSI creos Procon boy platinum ps-270. All in all i would not recommend this

Comes with everything described. I have an Iwata Eclipse CS, wear Medium / 7.5 medical gloves. Fits perfect, everything in reach, though the rear guard extends about 1/2 inch past my airbrush. I had my dremel tool ready just in case for any modifications - handle comes with extension and metal nut on the bottom to keep the airbrush secured. No matter what I tried, I could not get a good air seal from hose to the start of the extension - so I removed the nut and it sealed great. Unfortunately the airbrush was somewhat loose in the handle - hence the nut to screw it all down. Some 99 cent poster putty to help stabilize the airbrush to the handle and everything worked.I spent about 2 hours priming, painting, detailing and numerous paint changes. Everything stayed in place, so much easier to do pre-shading and low psi detail work with this handle. Very recommended - I was contemplating a trigger airbrush but this holder just saved me quite a bit of cash - just be ready to do some mods depending on your model.

This thing is perfect. A simple product that makes a huge difference. I have carpal tunnel, and this item has made it more comfortable to paint again. I just wish it came in multiple color options.

I almost didn't buy this because of some negative reviews I saw, but very glad I did. My master airbrush fits in it perfectly and helps me secure it better since I have really shaky hands. It did take a little while to get use to the feel but after that it was quite comfortable. The only thing I was upset about was I couldn't come up with a way to make my badger work in it but I knew that would be tuff to do when I ordered it. If you have a standard 1/8 brush then I would highly recommend this product. Especially for the price.

Easy to install