6-Pack Apple Watch 40mm Screen Protector for iWatch (Series 6, 5, 4, SE 2, SE) Flexible Clear Film Case Friendly Accessories

I previously purchased a tempered glass screen protector for my Apple Watch and within days, both protectors were broken along the edge and left sharp edges. I found this product and thought I'd give it a go. First, don't be intimidated by the wet application. The company sends a link with the product for a video on how to apply it to various devices. I have a Series 6 40 mm screen and watched the video for Series 4 and 5. Application merely involves dipping the protector in sudsy water and then placing it on the screen. That's it. The protector will be slick, so you can move it around to set it exactly where you want it. Once I got it where I wanted it, I set it aside for 15 minutes, and then came back to seal the edges and use the squeegee provided to get out most of the air bubbles. I let it sit overnight and the next morning I had a perfectly placed, totally clear protector that you can barely tell is even there. And, if you make a mistake, the company offers a free replacement or refund. Screen sensitivity isn't impacted at all. Great product.

Screen protectors have been a part of my life since 1999 or so. I work in an environment with airborne abrasive particles and I regularly handle large grinding wheels and other rough stuff. My fingers have abreasives embedded in them and will ruin an unprotected screen quickly. The Apple Watch presented my latest challenge with screen protection in trying to wrap around a curved surface. We now have 4 Apple watches and plenty of other mobile devices in our household so I keep busy with protecting screens.All screen protectors work pretty well if you apply them carefully and are patient with the process. Some are better than others in the long run but all will come off eventually. It's worth it because no matter how advanced the glass is it will get scraped and scratched. I didn't consider that my wife would need a screen protector for her Watch and I happened to look at it 6 months along and realized she desperately needed one despite working in a clean office environment.Most screen protectors have the same basic installation procedure but there is something different about the RinoGear application juice that makes the overall product a better buy. Other brand's application spray does little to allow the protector to "float" during installation so you can get it positioned correctly. I have 4 little tubes in my box of screen protector supplies that all work about the same: spray it on, apply protector, it sticks, desperately try to position it while it keeps grabbing. Take it off, repeat process.The RinoGear stays SUPER SLIPPERY during the entire alignment process and is still slippery after you've squeegeed out the bubbles and remaining liquid. At first I was concerned that this would result in poor adhesion on the curved sections but my wife's is still laying down after a month with no lifting. That's a record.All of these films offer pretty good protection and I haven't seen any that have measurably worse protection, but if you can't get them on without issues then you're less likely to use them. The RinoGear allow perfect alignment and, when cured properly, remain adhered to the curved sections longer than the other brands. (This is based on the average life of a protector on my wife's watch. Normally after a month there is lifting all over.)I start the process around 6 in the evening and leave it to cure overnight. Am gentle with it the first day or two.I've bought the RinoGear 40mm for my wife and will buy 44mm for my watch after I've burned through my other protectors. For the record: I'm using the RinoGear juice on other brand with no immediate issue. YMMV.

Installing one of these protectors is much harder than it is using tempered glass on a phone. That's because instead of glass it's a soft material that's very bendy. I lined up the top part and then slowly stuck it to the rest of the watch. On the first attempt I used the pseudo-squeegee included, which FYI is absolute trash - it would have worked on glass (barely since it's so thin), but on this rubber-like material, it just dragged and actually scratched/ruined my first "sticker". So I threw that out, used a second protector, and just pressed it with my fingers and softly with my nails - a thousand times better than using their "tool". Doesn't look bad - it's not really noticeable - and hopefully it'll protect my Apple watch from further scratches... Not bad for the money.

I’ve used this type of screen protector on my Fitbit and it worked great and lasted a long time. The design for this Apple Watch protector is terrible. I’m already on the 3rd one and it’s only been a month since I put the first one on.

This is my 3rd brand of Apple Watch screen protectors and so far my favorite. Each type was install and the process for installing each is similar involving patience and in the application process and drying time. Here is where this screen protector beats out the other major sellers on Amazon.This screen protector covers a large portion of the screen reaching almost all the way to the bezels around the watch. I use the Spigen Touch Armor case and having a full coverage screen protector makes putting on the case easier because it does t cause the screen protector to peel up at the edges. The other brands stopped closer to the flat part of the screen making it easier for my case to rub against the edges causing them to peel.In terms of the application process while this is a wet install similar to most of the other protectors available this one is actually easier to apply for one main reason, you don’t have to squeegee out the extra liquid. This makes the application easier in the sense that once you get the screen protector centered you don’t have to try to hold it in place while removing the liquid. Just let it dry for 20 or so minutes then spend time holding down the edges. Once you are sure the edges are down you can let the protector dry out for a day and it is perfect with no bubbles or peeling.Overall it does take time to let it dry and continuously hold down the edges after the install process but once it is complete I think it is still easier and better than other options available.*Update* December 2020I purchased these protectors for my Apple Watch Series 6 and the install is still as it was previously except that you now have to make your own solution mix which is just a half a cup of dish soap and a cup of water.

This screen protector is amazing, but first of all, you need to have patience with it, watch the instruction video properly and let it dry properly and you will have the best screen protector for your apple watch. The previous tempered glass screen protector that I bought from ebay was nothing compared to this, I had to chuck it away, the moment I put it on. My watch lost all the sensitivity with that tempered glass screen protector but with this one, it is amazing, it feels like you don't even have anything on.The fact that this product comes with a life time guarantee means that the company is confident with their product. It comes with 6 screen protectors in a pack, this is in fact way cheaper than those screen protectors you find on ebay. I can't recommend this product enough, would give it 10 stars if possible.

Easy to install, watched and followed the video from the website, protects the screen brilliantly

Followed the video for Apple Watch 3 curved edges on YouTube (not the actual written instructions which tell you squeeze the water out) and worked look fantastic. I can barely see the edges and it has only lifted slightly where the dial is but I wasn’t diligent enough to press it down there. If it comes off I will just try again with the multiple included in one pack. Even improved appearance of some existing moderate scratches

First of all, I tried on several devises to register for the warranty but the site does not work! Secondly, it’s not a clear screen protector (see picture). Looks murky to say the least. The surface was clean before putting this on. So, I’m not sure I’d recommend.

Edge to edge protector, would be best suited for use without case. Combos well with Goton case (as pictured, also from Amazon) but other cases may cause protector to detach. Edge version is tricky to install although QR code included on packaging that directs to instructional videos is a thoughtful touch.Quick Tips: drag protector around to get rid of bubbles, (let the bubbles exit naturally from exposed sides) DO NOT use hard edge/nail to ‘squeegee’ as it will mar the surface. When waiting for sides to dry, some dust got trapped underneath, running under soapy water got rid of dust and reactivated the side adhesion. Being gentle and patient is key. Touch feel and function is excellent.