iSpring WSP50GR Spin Down Sediment Filter, 360 Rotating Head, 50 Micron

Really good sediment filter. I had some fine sediment clog up the injector filter on my softener. I don't have space for the big blue, and needed something vertical. This works perfectly. I also connected a quick connect tube to the bottom and ran it out the basement wall onto my gutter drain for the dry well. This is a nice setup because as it collects sediment you flush the system via the drain and it pushes most sediment out the drain port. That way you only have to remove and clean the reusable metal filter every few months. This product is the only product I could find that fit vertical. The easy flush is a huge bonus. As other say, go heavy on sealing the threads. I used average pipe dope only and I had to remove and use plumber tape plus thicker dope. It leaked with just normal dope. It closed up tight on the second try. It has dual threads too, I went to 3/4 copper with shark bites, I did 1 inch shark bites, but I could have used the inside thread as well for 3/4. My way likely is less flow resistance anyway. This also was easy on my vertical pipes as i had space between the well pump shut off and the first softener shut off,so it's easily isolated and I was to vertically. I also emailed with a filter question after I set it up, and Sean answered the next morning. They even sent me a second filter to try! Thanks Sean! I highly recommend this product.

iSpring WSP50GR I received the item quickly for my project to renovate our home water system and after opening, inspecting to ensure all items were present, I was concerned about the weight of the item. The filter is made well, but is heavy. So, in planning for the install of this item, I would recommend some type of bracket be made for this filter for future installers to make the installation better and more durable over the longer term. I ended up using stand-offs to secure my lines, and where this filter is mounted, I used two, one above and one below, and it seems relatively stable and durable with that. I did experience leaks at the SharkBite fittings; however, this was my own fault and I should have used both connection paste and the included Teflon tape together. Wherever I did not, I experienced some small leaks in my new system, and so I would highly recommend to anyone doing this type of project to use both on any threaded connections, as that worked best. No leaks were noted in the unit itself, or at the rotating head, which surprised me. No real pressure drops were noted and I have three gauges in my system, one at the pressure tank manifold, one at the input to the iSpring WGB21B 2-Stage Whole House Water, and I would see those drops, I think. I only noticed about a 5-psi difference between supply and output pressures. However, I did not use ¾” lines in my setup and used 1” lines throughout until it meets the house system which does reduce to ¾” at that point. So far, and it has only been about three days now, but the filter is performing as described in my system. For the manufacturer, I would add a bracket kit.

We just had a new well dug 350 feet deep. We needed to ensure that we get rid of as much sediment as possible before it hits our twin "Big Blue" filters and our UV filter. After much research, we decided to buy this iSpring filter. We needed to find a model that could be installed on a vertical pipe, and this filter allows you to install either vertically or horizontally. We used SharkBite push-on couplings, which made the insulation very easy. This product is very well made, and our initial impression is that it's going to do the job that we need it to do. Prior to installation, I got in touch with their customer service team and a lady called Michelle was incredibly helpful and advised us to use the correct filter size - 100 microns. She sent us the right one that day. I would therefore recommend this product, and their customer service was first class thanks to Michelle!! Good product, good company!!

When I decided to replace my 19-year-old whole house filter (the handle was getting hard to turn), I added a pre-filter to the system. I did my research and landed on the iSpring WSP50GR spin-down filter. I chose this model because of the rotating head, although in hindsight it was not needed for my particular application and I could have done without it. The unit has a heavy-duty brass head, which has some heft to it, so I knew it would be able to take the 1" brass PEX fittings I wanted to use. The filter comes with a flimsy support bracket which is total garbage. The filter itself simply rests on top of the arms and is not positively attached to the bracket in any way. The arms of the bracket also interfered with the inlet/outlet fittings and ended up being thrown away. I didn't notice when I was researching the unit that the gauge measures water pressure in megapascals (mPa), not PSI (the one picture on Amazon of the gauge face is very small). mPa is the metric standard outside of the USA while PSI is the imperial standard used in the US. When I contacted customer service to inquire about obtaining a PSI gauge, I was told the unit only came with a mPa gauge. Undeterred, I thought I could just remove the white plastic cowling from the filter, unscrew the mPa gauge, and replace it with a 1/4" base glycerin-filled PSI gauge. Wrong! The pressure gauge included with this unit does not have a 1/4" base, it's smaller. So I was forced to reattach the mPa gauge and print out some conversion numbers so I would know what the PSI equivalent was. Overall, the unit seems sturdy and was easy to install. The bracket is garbage and the filter should come with a PSI pressure gauge, not mPa. Time will tell how it holds up to city water at approximately 67 PSI (or .45 mPa).

I ordered this water filter to install as a pre-filter on my home well water system. Solid, well-put-together unit! One minor complaint but not enough to knock a star off: the pressure gage reads kPa not psi...would be nice to have the gage read with both scales. I installed the unit in about 30 minutes using 3/4” Sharkbite fittings and lots of Teflon paste. Easy install, no hassle! Worked great for about a week and that was when the 50 micron filter started getting choked down with a lot of sediment! Apparently I should have ordered the 100 micron size! I contacted iSpring Francis in Customer Support was able to send me out a 100-micron cartridge that fits the 50-micron housing...at no charge! Top notch product and top notch service! Would definitely recommend and buy again!

It does not work and is now just decoration in my utility room. Installed it when we replaced our well pump and also installed a big blue sediment filter, whole house filter, and iron filter. Put it front because it's supposed to be a spin down and grab the large particulates before they get to the other filters. It made the whole system crash. Under normal use it needs to be scraped a few times per day, otherwise we drop from 60 PSI to 10 PSI. If we do a load of laundry and the dishes it will need to get cleaned immediately. Complete waste of money, but can't return because it would probably cost more to have the plumber come take it out than it's worth. At least the filter is removeable I suppose so when it fails you can at least disable it (oh yeah, there's no bypass either).

Seems to be well made and works good but I spent several weeks with low water flow inside my house after I installed this filter. I thought that after I installed it I dislodged something in the pipes that clogged it up. It's an older house and has the original plumbing. I'm on a well also. I checked this, blew out that, bought a new pressure tank, dug up the water line. After doing everything except replumbing the house I cut off this filter and the water was back to normal. I turned it around and it works fine. iSpring has to know that the arrow on the housing that shows the water flow through the filter is pointing the wrong way. Maybe a note inside the box to explain this defect isn't to much to ask... I wasted more money and time than the filter is worth. So if you install this and your water seems restricted, turn it around backwards, it will work fine

I use a well for all of our household water needs, a home with 3.5 baths and 5 individuals living and using lots of water. I had a single large whole house water filter, with cartridges that are 10" tall and 4" in diameter. We do not use any water softener and there was nothing between the well pump and the main whole house filter, except for the expansion tank, before I installed the iSpring WSP50GR. I was having to change the whole house filter cartridge ($24 each) every month, instead of the advertised three to six months, due to sediment which restricted water flow. I did research and settled on the iSpring WSP50GR. I am not a plumber, but I am capable, so I was not intimidated to cut the main water line coming into the house to install the iSpring WSP50GR filter. Once installed, we were able to notice the change right away. I could see, through the clear housing, when I needed to simply trust he quarter turn valve, which then back flushes the sediment. I have learned that I need to do this every 4 to 6 days, depending on how much water we use. Even before I can "see" the sediment in the clear housing, we can fell a decrease in water pressure. I go downstairs, back flush the filter for 3 to 5 minutes, with a tube I ran from the bottom of the filter to a slop-sink a few feet away, and once done, the water pressure is back to normal, with an added bonus of now I only have to replace the main filter twice a year. The iSpring WSP50GR paid for itself after less than a year. We have had this installed since September 2020 and it has been great. I have followed the directions and maintenance guidelines, which indicate that the filter housing and stainless steel mesh filter be removed every so often and cleaned. The filter package came with extra o-rings as well, to make this process easier. However, recently, when I did the filter housing and mesh filter maintenance and cleaning, the o-ring was no longer viable as it was stretched out. I thought I still had one left, but I did not. I tried to find out what size o-ring was needed (2" ID btw) but could not find this. I called Nick at iSpring and explained the problem. Nick was kind enough to stand behind the product and he sent me 2 additional o-rings, which were delivered in 2 days, at no added cost to me. So, in review, filter is a money saver. It is easy to install, even for a non-plumber like myself, although if you are not familiar with soldering and plumbing, call a licensed plumber to install this, and it is very easy to use. Oh, and the customer service when you call iSpring, is top notch. Thanks Nick for your attention and great customer service.

È incredibile le impurità che trattiene. Comodo lo scarico sottostante

We live in the Ottawa area on the eastern extremity of the Canadian Shield where the subterranean water courses are very rich in iron, this manifests as ferrous oxide together with sediment in our well water. I installed the WSP50GR in March 2020 as a pre-filter to extend the life of our water softener. iSpring provide access to the manual online so preparation for installation was easy. Installation is a breeze using conventional fittings for Pex, copper, CPVC, etc. I read the manual and got the correct parts for my specific installation ahead of time. If you choose to have a plumber do the installation he or she will probably enjoy the job, it’s that easy. I reconfigured our filtration layout in December to add an oxidizing iron filter and changed the orientation of the WSP50GR ports from the original horizontal to vertical, it works very well in either position. Once installed there is a small amount of movement possible between the filter body and the mounted flange that is accommodated through the ‘O’ ring seals. The movement is to allow for changing the filter body orientation. There is no movement during operation and no leakage. Observing material on the filter is easy as is using the scraper to dislodge the stubborn stuff. From March to October the unit gave excellent service when I back-flushed it every two days and used the scraper approximately every four days. Beginning late in December I noticed that the unit was plugging prematurely. The cause appears to be a lot of new home construction in our area with associated well drilling. Once I removed the mesh, cleaned it with hot soapy water and air dried it we had full pressure again. Because the mesh cleaning is now required so frequently I wanted to increase the filtration mesh size from the standard 50 micron to 100 micron for the construction period. I contacted iSping to ask if this was possible and if so to request the substitute part number. I received immediate and excellent assistance from Richard in their customer support department. I did a lot of research before choosing the WSP50GR and made a good choice. The unit is easy to install, works very well and could not be easier to service. The unit gauge allows water exit pressure to be monitored and compared with well pump pressure. I have provided a picture of the install and the flow diagram for explanation.

choisi comme préfiltre avant l'entrée dans la pompe, avantages sa double orientation de raccordement et le tamis en inox. format moyen.

Ich habe den iSpring WSP50GRE als Vorfilter für meine Hauswasseranlage (Brunnenwasser) im Einsatz und bin absolut zufrieden. ​Vorteile: ​Robuste Verarbeitung: Das Gehäuse wirkt sehr stabil, und das integrierte Manometer ist extrem praktisch, um den Wasserdruck im Auge zu behalten und zu sehen, wann der Filter dichtmacht. ​Effektive Filterung: Mit 50 Mikron fischt das Edelstahlsieb Sand, Sedimente und Schwebstoffe zuverlässig heraus, bevor sie in die Pumpe oder die teureren Feinfilter gelangen können. ​Einfache Reinigung: Die Spin-Down-Funktion (Rückspülung) funktioniert kinderleicht. Einfach den Kugelhahn unten öffnen, und der Dreck wird herausgespült. Das spart auf Dauer bares Geld, da man keine Einweg-Kartuschen nachkaufen muss. ​Auto-Flushing-Option: Die GRE-Version ermöglicht den Anschluss eines automatischen Spülventils, was den Wartungsaufwand nochmals extrem minimiert. ​Fazit: Wer mit Sand oder Sedimenten im Brunnen- oder Leitungswasser zu kämpfen hat, bekommt hier eine langlebige und wartungsarme Lösung. Das Preis-Leistungs-Verhältnis stimmt absolut. Klare Kaufempfehlung!

Ürünün basınç sensörü çalışmıyor