0.2 Meter (7IN) Multimode Duplex Fiber Optic Cable (62.5/125) - LC to LC - Orange

Used this to run through conduit and supply fiber to a garage in the back of my house. I bought this primarily based on price.This is an interior cable so my use isn't the recommended one. Having said that, running the length in unground conduit, I haven't had any issues. We're at the 2 year mark since installation and no problems.

I wanted galvanic isolation (no wire connection) between my UniFi 10G switch and a Unifi 1 G switch.Why galvanic isolation? To (perhaps) help reduce ground loops / noise on some sensitive equipment connected to the 1 G switch. Anyway, this worked well - plug it in and forget.

Nice Cable. Needed a smaller cable to connect two switches. Worked great. Truly plug and play. . .

It works as described and for far less cost than expected. If your equipment can support 100gig fiber, I suggest you update/upgrade to this to save money in the long term.

TL;DR - This cable only required the removal of the stoppers on the ends and insertion into the SFP to work. No cleaning required and super easy to attach or detach.After using ethernet to connect my gateway to my switch for the longest I decided it was time to free up a ethernet port on the switch. Upon reading which SFP port would be best to use for my setup I found these cables. The length was great as I have my gear rack mounted next to each other and having a short cable makes for a cleaner installation. I simply had to remove the rubber stoppers and insert into the gear to get it to work. It was just as easy to remove them as well. With the cables being short there is no excess to be concerned about either. I will more than likely connect my next device via fiber once I decide how I want to expand and another short cable will do the job perfect.

I bought this cable to attach a Unifi UDM Pro to a Unifi 48 port switch for my network. The cable is the perfect length for fast communication between both devices. Very nice for small distances and for the needed 10GB speeds between devices.

Worked perfectly, shipped in great condition and they had nice caps on the ends to protect from dust.

Have had my ubiquiti gear networked together with this for a while with no issues.

Used these for the TP LINK MODULE SM OS LC TO LC for connecting 2 fibre modules together and installed on stacked two units SOTM SNH10G made in Korea switch for audiophile use. So far it works fine with no deop off but cannot measure jitter which is the problem with fibreoptics. Until than it works fine.

I bought this to use with my PC and a 10Gb switch. It work just fine however, the cable appears to be smaller in diameter than other cables, just my opinion

Great cables, I bought them to connect my usg to switch at home. They work well.

This cable functioned as desired with an SFP module

Works as expected.