KAHE2016 220V Circular Saw Blades Sharpener Electric Water Injection Grinding Grinder Machine Solid Motor 250W

Description

Product description Description: - The machine structure is strong and it can work on max diameter φ700mm. - The specially equipped motor has a very good running speed which can have a very good co-operation with the diamond sanding wheel. - The direction of the sharpening should be paralleled with the diamond sanding wheel, it is better for grinding the back teeth face. - This machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm. - Also suitable to grind other material such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. - Steel chassis construction. - Grinding wheel angle control with large aluminum knob. - Will hold each blade head position by a position lock. - X axis feed wheel, stable and very sharp grinding. - Rotary angle mark. Specifications: - Power: 250W - Voltage: 220V - Running Speed: 2850rpm - Adjusting Angle Of The Wheel: ±20° - Handle Turning Angle: 30 Degrees From Left And 45 Degrees From Right - Working Diameter: 80-700mm - Item Size: 30.30"x16.93"x11.81"(72x43x30cm) - Package Size: 16.93"x16.93"x13.58"(43x43x34.5cm) - Weight: 66.14lbs (30kgs) Safety remarks: - Should match the standard voltage; We must strictly take a good ground, install leakage circuit breakers. - The machine should be set in a dry, clean, steady and parallel place. - Release the round plat and then adjust the saw blade angle. - Check all parts that need locks before operation. - Take off the electricity after work finishing. - After the machine runs well then you can start the work. Package Included: 1 set of 220V Saw Blade Grinder Machine (250W) Legal Disclaimer Method of operation: 1 loosing the fascia, then adjust the angle of grinding blade and fasten. 2 Adjusting of center axle. - Rotating the center axle to the grinding blade. - Pushing the center axle to the right. - Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth. - Rotating the rotation table to ensure the angle of grinding blade. - The cross angle between the grinding surface and work surface is about 5. 3 Adjusting of positioning assembly. - Adjusting the saw blade to the best grinding position, rotating the positioning frame and fascia. - Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw. - Fourth, adjusting the center axle to the same gap of grinding quantity to the right. 4 Last, when all the parts are fastened, the saw blade supported with hand will be grinded.